12006 error code

Not applicable

3

years ago

The following is a partial citation for a previous support response on another defect board.

In the upper right corner of CLIP STUDIO [? ] Icon, open [Version Information]
If the version is earlier than 1.6.3, please install the latest version of CLIP STUDIO PAINT.
(If you update CLIP STUDIO PAINT, CLIP STUDIO will also be updated automatically.)

If the latest version of CLIP STUDIO does not improve, check the version of Internet Explorer.

CLIP STUDIO operates using Internet Explorer functions regardless of the browser you normally use.
First, make sure that the version of Internet Explorer installed is 11.
If it has not been upgraded to version 11, perform WindowsUpdate.
(Check with your PC manufacturer for WindowsUpdate procedures)

After confirming that you are using Internet Explorer 11, follow the steps below to operate Internet Explorer.
Check if there is any improvement in the event.
(Downloaded files are not deleted by Internet Explorer operation)

■ How to delete Internet Explorer cache
1. Start Internet Explorer11.
2. Click the gear-shaped icon in the upper right corner of the screen.
3. Click [Safety] → [Delete Browsing History].
4). [Delete Browsing History] will be displayed. Check all items and click the [Delete] button.
5). Please restart your PC and check the operation.

■ How to reset Internet Explorer
1. Start Internet Explorer.
2. Click the gear mark in the upper right and click Internet Options.
3. Click Reset on the Advanced tab.
4). The [Reset Internet Explorer Settings] dialog box will appear.
Check [Delete personal settings] and click [Reset].
* Please check the information in the window and reset.
5). When the reset is complete, click Close, click OK, and then click OK again.
6). Exit Internet Explorer and restart your PC to check the operation.

• Japanese

	Download Windows 12006 Error Fix Tool
Compatible:Windows 98, 2000, ME, XP, Vista, 7, 8, 10 (32/64) File Size: 4.9MB

What is the 12006. error file.

12006 error is a virtual TMP file and its created by the software unknown developed by Microsoft windows developers .file 0.0.0.0. and MSD5 value is 12006 is the latest version of 12006 . The error can be seen on windows xp, windows vista, windows 7, windows8 and windows10.

Overview of 12006 File:

MESSAGE:-

• — 12006 bad image
• — 12006 system error
• — 12006 runtime error
• — 12006 application error
• — 12006 unable to locate content
• — 12006 entry point not found

Causes Of Windows Error 12006:

There are many causes of this error like as virus or malware attack,Trojan virus, malicious adware virus, spyware ,corruptions of files system, bug attack, hard drives fails to communicates the data. 12006 temp. error. Its causes because of deleted software and apps by mistake.

Solutions to Solve Windows Error 12006:-

Step 1. Ununistall the damage programs

Click the start button, search the control panel and click to open, search uninstall a programs and click to open, look the unknown or crash programs, right click on it and uninstalled it on your computer. After the uninstallation the programs restart your computer.

Step 2. Clear junk and temporary files

Click to start the computer, go to search panel and search temporary files, junk files or cache files, select on it right click and deleted it. After the uninstallation the programs restart your computer.

Step 3. Run an antivirus

Click to start your computer, download antivirus programs and install. After the installation the antivirus click to run this programs and scan all files or data and detect the crash data or files click to deleted it on your computer. After the scan properly your pc and uninstalled all crash files then restart your computer.

Step 4. System restores

Click to start the computer, go to the desktop ,right click on my computer and go to the properties click on it, go to the securities system and click to open, click to open system protection, restore system files and setting next choose a different drivers next drive c finish. A text is shown on your pc click to yes. After this process restart your computer.

However, if you have same issue and all the above steps don’t work for you then don’t worry still there is a best solution to fix windows error 12006. Use Reimage PC Repair Suite Tool, this tool can remove error from your computer and the best part of this software is, it is fully automatic repair tool. If you don’t have enough knowledge in PC and also you can use this and relax it will protect your system data also so no any data loss can happen.

Recommended: Use this Automatic repair tool to fix all kind of windows problem.

It works fine for me. Try restarting Rainmeter

I can’t see the rest of your code, so what MAY be happening for you is that you have two meters with the name [name], which is not allowed and will cause only one of them to be displayed. I’m suspicious of this due to the name [MeterString] you gave the meter displaying today’s weekday. You should use [MeterTodayName] or something both more descriptive, (for debugging purposes) and unique.

If this is not the case, another thing that may have happened is WebParser got hung up. This CAN happen when you are debugging a skin and hitting refresh over and over. it may take anywhere from a few milliseconds to several seconds for WebParser to fully retrieve a web site, and if you fire it over and over before it can finish each run, it can get hung up. Restarting Rainmeter will fix this if it happens.

By the way, the next problem you are going to hit I can see coming…

The way WebParser works, you retrieve the entire web page and parse out just the information you desire in the main WebParser measure, the one with the RegExp= on it. You then pick out the bits of information you want, the ones you returned in «(.*)» by using StringIndex=xxx. The xxx is which, in order, of the «(.*)» returns you want to use / display. Since StringIndex= is set in a measure, not a meter, you are going to need multiple WebParser measures to get more than one value.

Let me illustrate:

[MeasureWeatherDay1]
Measure=Plugin
Plugin=PluginsWebParser.dll
UpdateRate=1800
URL=http://xml.weather.com/weather/local/53221?&unit=Farenheit&dayf=7
RegExp="(?siU)<day d="0" t="(.*)".*"
StringIndex=1

What you have now, returns just one value, and using StringIndex=1 on the measure returns that value.

[MeasureWeatherDay1]
Measure=Plugin
Plugin=PluginsWebParser.dll
UpdateRate=1800
URL=http://xml.weather.com/weather/local/53221?&unit=Farenheit&dayf=7
RegExp="(?siU)<day d="0" t="(.*)".*dt="(.*)".*"
StringIndex=1

Logical extension of the RegExp, to get the next bit of data you may want, the «date». Problem is, StringIndex 1 is still going to return «Friday» and there is no way to get at the value returned in t=»(.*)».

So what we do is use the main WebParser measure to return ALL values we want, then individual measures to put each value in its own StringIndex.

[MeasureWeather]
Measure=Plugin
Plugin=PluginsWebParser.dll
UpdateRate=1800
URL=http://xml.weather.com/weather/local/53221?&unit=Farenheit&dayf=7
RegExp="(?siU)<day d="0" t="(.*)".*dt="(.*)".*"

[MeasureTodayName]
Measure=Plugin
Plugin=PluginsWebParser.dll
UpdateRate=1800
URL=[MeasureWeather]
StringIndex=1

[MeasureTodayDate]
Measure=Plugin
Plugin=PluginsWebParser.dll
UpdateRate=1800
URL=[MeasureWeather]
StringIndex=2

[MeterTodayName]
Meter=String
MeasureName=MeasureTodayName
X=2
Y=17
FontColor=0,0,0,255
FontSize=12
StringAlign=LEFT
FontFace=Tahoma
Antialias=1
Prefix="Day Today: "
Text=%1

[MeterTodayDate]
Meter=String
MeasureName=MeasureTodayDate
X=2
Y=4R
FontColor=0,0,0,255
FontSize=12
StringAlign=LEFT
FontFace=Tahoma
Antialias=1
Prefix="Date Today: "
Text=%1

Take a look at what I did, and you will see the «approach» needed. Let me know if you have questions about why / how, but you will also find this http://rainmeter.net/cms/Tips-WebParserPrimer to be helpful in wrangling WebParser.

    char *uNameAddr = (char*) ExeBaseAddress + 0x34F01C;
printf("%s n", uNameAddr);

string url = "http://xxxx.xxxx.com/xxxx/?u=";
string username = uNameAddr;string combine = url + username;

cout << combine << endl;
//http://xxxx.xxxx.com/xxxx/?u=MyUsername <--

URL_COMPONENTS urlComp;
LPCWSTR pwszUrl1 = (LPCWSTR)combine.c_str();
DWORD dwUrlLen = 0;

hRequest = WinHttpOpenRequest( hConnect, L"GET", urlComp.lpszUrlPath,
NULL, WINHTTP_NO_REFERER,
WINHTTP_DEFAULT_ACCEPT_TYPES,
0);

 12006       ERROR_INTERNET_UNRECOGNIZED_SCHEME
The URL scheme could not be recognized or is not supported.

Решение

LPCWSTR pwszUrl1 = (LPCWSTR)combine.c_str();

Другие решения

Других решений пока нет …