by
·
Published May 11, 2014
· Updated May 29, 2018
 |
| [Solved] One or more table pointers are invalid. Modification could be unsafe. |
“Fatal Error: One or more table pointers are invalid. Modification could be unsafe.
Press any key to continue booting”
NOTE: This Solution also work for Error
“FATAL ERROR: Failed to locate necessary table(s) to make adjustments. Press any key to continue booting”
if your computer showing the error message , mentioned above,in toshiba C50-A this problem is very common, the solution is very simple,
all you need is a windows DVD,
Put the DVD in optical drive & boot from DVD, when you reach at 1st screen,press SHIFT+F10 shown in the image below.
 |
| Press SHIFT+F10 |
Next you will see the command prompt windows, as shown in the image below.
 |
| [Solved] One or more table pointers are invalid. Modification could be unsafe. |
here you will type the command,
“bootsect.exe /nt60 sys /force”
also shown in the image below
 |
| [Solved] One or more table pointers are invalid. Modification could be unsafe. |
Hit enter, if you typed the command correctly, you will see the following text on your screen, as shown in the image below
 |
| [Solved] One or more table pointers are invalid. Modification could be unsafe. |
if you don’t see this message, then you made a mistake when typing the command , correct the error, and once this message appears , just restart your computer,
error message should be solved.
Tags: «FATAL ERROR: Failed to locate necessary table(s)Desktop RepairFatal ErrorLaptop RepairingOne or more table pointers are invalid
Mutahhar Bashir
Passionate blogger, have excellent problem solving skills, quick learner, love to accomplish difficult tasks, improving my skills while helping others through this blog.
You may also like…
You are possibly getting the error message at your system boot due to missing ‘bootsect.exe’ file from the ‘System32’ folder of the Windows directory. It is often the cause of the problem after Windows fresh installation.
Image of the bootsect.exe missing error in Windows 8
What the system does is to display the error message of the missing file and ask you to press any key to continue booting. If you did not hit any key it will remain there while you ponder what the cause of the problem could be.
However, the ‘bootsect.exe’ is a tool used to repair the boot sector of your computer. It helps to update the master boot code for hard disk partition to switch between Boot Manager(BOOTMGR) and New Technology System Loader(NTLDR), which is a boot loader for Windows Operating System.
If you are experiencing this issue after finishing fresh setup of Windows 8 or Windows 8.1, this information is meant for you to quickly forestall it. To do that follow the instruction below.
Image of bootsect.exe system FATAL ERROR
STEP 1: Restart your system and press any key to continue booting to your desktop environment.
Image showing red arrow pointing to removable Windows drive
STEP 2: Insert your Windows 8 USB or DVD packages and double-click to open it.
Red arrow pointing to Boot folder
STEP 3: Next, double-click on ‘Boot’ folder to open it.
Red arrows pointing to process to take
STEP 4: Right-click on ‘bootsect.exe’ and select ‘Copy’ to copy the file.
Red arrow pointing to Local Disk (C:)
STEP 5: Double-click on your ‘Local Disk(C:)’ to continue.
Image of red arrow pointing to Windows directory
STEP 6: Click on ‘Windows’ folder and open it.
Red arrow pointing to System32 folder
STEP 7: Locate ‘System32’ folder from the ‘Windows directory’ and double-click on it.
Image showing red arrow pointing to Paste on drop-down menu
STEP 8: Right-click inside the ‘System32’ folder and select Paste from the drop-down menu to paste the ‘bootsect.exe’ file.
Red arrow pointing to Run as administrator
STEP 9: Right-click on the ‘bootsect.exe’ and select ‘Run as administrator’ to load it. Restart your system for changes to take effect.
|
6 / 6 / 2 Регистрация: 15.03.2013 Сообщений: 196 |
|
|
1 |
|
|
30.06.2013, 11:09. Показов 9072. Ответов 5
При запуске все время выводит Fatal error: One or more table pointers are invalid. Modification cloud be unsafe. после нажатия на ввод загружается windows 7, как можно решить эту проблему? Что за таблиц?
__________________
0 |
|
21297 / 12107 / 653 Регистрация: 11.04.2010 Сообщений: 53,466 |
|
|
30.06.2013, 11:14 |
2 |
|
Что за таблиц? а что за материнк?
0 |
|
6 / 6 / 2 Регистрация: 15.03.2013 Сообщений: 196 |
|
|
30.06.2013, 11:19 [ТС] |
3 |
|
а что за материнк? Gigabyte LGA1150 GA-Z87M-D3H Z87
0 |
|
4040 / 2505 / 301 Регистрация: 22.04.2012 Сообщений: 10,745 Записей в блоге: 2 |
|
|
30.06.2013, 14:11 |
4 |
|
Вот,попробуйте. Миниатюры
1 |
|
Модератор
15151 / 7739 / 726 Регистрация: 03.01.2012 Сообщений: 31,809 |
|
|
30.06.2013, 16:28 |
5 |
|
Вот,попробуйте. На всякий: там в команде переводчик влез куда не просят. Вместо /силы надо читать /force…
0 |
|
6 / 6 / 2 Регистрация: 15.03.2013 Сообщений: 196 |
|
|
20.07.2013, 16:36 [ТС] |
6 |
|
Непомогло…
0 |
Fatal error: One or more table pointers are invalid- Help
-
Thread starterSiicKx
-
Start dateSep 5, 2013
-
- Aug 20, 2013
-
- 44
-
- 0
-
- 10,530
- 0
-
#1
«Fatal error: One or more table pointers are invalid. Modification could be unsafe… Press any key to continue boot»
My harddrive is my old IDE format hard drive, and the guy who installed my components had to use an IDE to SATA adapter.
What is this table pointer error, is it dangerous/critical, and how can I solve this because it it bothersome to have to press enter on every boot. Thanks for any help.
Please pardon my placement of this post as I did not know where to put it and it started on a new install of windows 7 on my new components.
-
- Dec 18, 2009
-
- 326
-
- 0
-
- 18,810
- 24
-
- Dec 18, 2009
-
- 326
-
- 0
-
- 18,810
- 24
-
#2
-
- Aug 20, 2013
-
- 44
-
- 0
-
- 10,530
- 0
-
#3
Tried, it tells me-
Bootsect.exe is not recognized as an internal or external command, operable program, or batch file.
-
- Aug 20, 2013
-
- 44
-
- 0
-
- 10,530
- 0
-
- Dec 18, 2009
-
- 326
-
- 0
-
- 18,810
- 24
-
#5
-
- Dec 18, 2009
-
- 326
-
- 0
-
- 18,810
- 24
-
#6
-
- Dec 18, 2009
-
- 326
-
- 0
-
- 18,810
- 24
-
- Jun 4, 2011
-
- 84
-
- 0
-
- 18,630
- 0
-
#9
Make sure you have removed USB flash drivers and other external hard disks before proceeding.
1. Boot the computer from installation disk
2. Press and hold SHIFT key and press F10
3. Enter bootsect.exe / nt60 SYS / force and hit enter key
4. Restart PC.
Note: If it does not work use the command bootsect.exe /nt60 ALL/force instead of bootsect.exe /nt60 SYS /force
NB: To avoid this issue happening, Select forced mode from the menu while cracking operating system
hi, i have the same problem of invalid pointers, i booted from the disk and then entered the command. it says something like info about the boot instructions but doesnt solves the issue. please help
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
- Topics