Flexnet licensing error 103 577

[{«Product»:{«code»:»SSKR2T»,»label»:»IBM Engineering Requirements Management DOORS»},»Business Unit»:{«code»:»BU059″,»label»:»IBM Software w/o TPS»},»Component»:»Licensing»,»Platform»:[{«code»:»PF033″,»label»:»Windows»}],»Version»:»9.2;9.2.0.1;9.2.0.2;9.2.0.3;9.2.0.4;9.2.0.5;9.3;9.3.0.1;9.3.0.2;9.3.0.3;9.3.0.4;9.3.0.5;9.3.0.6;9.3.0.7;9.4;9.4.0.1;9.5″,»Edition»:»»,»Line of Business»:{«code»:»LOB59″,»label»:»Sustainability Software»}}]

Flexnet licensing error 103 577

В таблице ниже приведены коды наиболее распространенных ошибок FlexNet, о которых может сообщать Autodesk Network License Manager. Коды ошибок, как правило, имеют вид «Ошибка [1.5.###]», где ### соответствует коду ошибки, указанному в таблице.

Количество символов в пути к файлу лицензии превышает допустимое. Существует ограничение на количество файлов лицензий, которые могут использоваться диспетчером серверов лицензий. Это ограничение касается количества символов в комбинированных путях к файлам лицензий:

UNIX — 40 960 символов;
Windows — 20 400 символов.

Уменьшите число файлов лицензий или перегруппируйте их так, чтобы пути стали короче.

Источник

Adblock
detector

View previous topic :: View next topic
Author	Message
MiKar Joined: 17 Jan 2010 Posts: 1	Posted: Tue Jan 19, 2010 1:49 am    Post subject: Remote Desktop: License Error Hi, when connecting to the PC (WinXP) where the simulator is installed using Microsoft’s Remote Desktop I get the following licensing error when trying to start the simulation: Code: Error (LIC_NE) License not available. FLEXLM reports: No such feature exists. Feature:       IMP_OVPSIM License path:  C:Imperas/OVPsim.lic; FLEXnet Licensing error:-5,357 For further information, refer to the FLEXnet Licensing End User Guide, available at «www.macrovision.com». Cannot checkout an uncounted license within a Windows Terminal Services guest session. Feature:       IMP_OVPSIM_20091016.0 License path:  C:Imperas/OVPsim.lic; FLEXnet Licensing error:-103,577 For further information, refer to the FLEXnet Licensing End User Guide, available at «www.macrovision.com». Fatal (LIC_FE) If you have a license from OVPworld, put it in $IMPERAS_HOME/OVPsim.lic Alternatively, set IMPERASD_LICENSE_FILE environment variable to your license file or server location. If you don’t have a key, click on download at www.OVPworld.org Info Exiting However, when starting the simulation without using remote desktop, i.e. personally sitting in front of the PC, everything works fine. Is this a desired behaviour? It’s rather cumbersome to always have to get into another room just to start a simulation…
Back to top
LeeMoore OVP Technologist Joined: 27 Feb 2008 Posts: 635	Posted: Wed Jan 20, 2010 6:00 am    Post subject: Re: Remote Desktop: License Error Hi MiKar MiKar wrote: Is this a desired behaviour? It’s rather cumbersome to always have to get into another room just to start a simulation… The FlexLM license file supplied, does not allow a Windows Terminal Services session. However you can overcome the probem you are having by running a VNC server on your windows machine and accessing the VNC server from a remote VNC client, (rather than using remote desktop) Thx Lee
Back to top
ManishAgg Joined: 19 Apr 2010 Posts: 3	Posted: Mon Apr 19, 2010 4:06 am    Post subject: I am getting the following error when I am trying to run the ./ArmIntegratorCP_tlm2.0.Linux.exe. (I am not using any Remote Desktop session that is I am running the command on the computer itself) SystemC 2.2.0 — Sep 2 2008 17:35:06 Copyright (c) 1996-2006 by all Contributors ALL RIGHTS RESERVED Constructing. Error (LIC_NE) License not available. FLEXLM reports: No such feature exists. Feature: IMP_OVPSIM License path: /home/manish/install/OVPSim_demo_platform/OVP/Imperas.20100122. — 0/OVPsim.lic FLEXnet Licensing error:-5,357 For further information, refer to the FLEXnet Licensing End User Guide, available at «www.macrovision.com». No such feature exists. Feature: IMP_OVPSIM_20100122.0 License path: /home/manish/install/OVPSim_demo_platform/OVP/Imperas.20100122. — 0/OVPsim.lic FLEXnet Licensing error:-5,357 For further information, refer to the FLEXnet Licensing End User Guide, available at «www.macrovision.com». Fatal (LIC_FE) If you have a license from OVPworld, put it in $IMPERAS_HOME/OVPsim.lic Alternatively, set IMPERASD_LICENSE_FILE environment variable to your license file or server location. If you don’t have a key, click on download at www.OVPworld.org Info Exiting
Back to top
AdminiStrator Site Admin Joined: 11 Feb 2008 Posts: 94	Posted: Mon Apr 19, 2010 6:37 am    Post subject: Hi Manish, It looks as though the release you are trying to run is version 20100122.0. But the License file you were sent recently is for the latest release IMP_OVPSIM_20100331.0. In order to use the new key supplied to you, you will need to use the latest revision of OVP (version 20100331.0) Pleae let me know if you still have a problem after trying the latest release. Lee.
Back to top
ManishAgg Joined: 19 Apr 2010 Posts: 3	Posted: Tue Apr 20, 2010 1:20 am    Post subject: Hi Administrator, Yes downloading the latest version resolves the problem. But I got stuck in another problem. I have downloaded and installed the following packages: OVPsim.Linux.sfx OVPsim_demo_linux_ArmIntegratorCP.Linux.sfx These releases contains the precompiled binaries. There is no Makefile present in the Demo/ OVPsim_linux_ArmIntegratorCP in the directory. Ss, is the build support has been removed from the latest version ?? How can I rebuild the package again? Please help.
Back to top
JimStraus OVP Technologist Joined: 09 Dec 2008 Posts: 157	Posted: Tue Apr 20, 2010 2:36 pm    Post subject: Not sure why the Makefile is not there but this should work: Code: IMPERAS_HOME := $(shell getpath.exe «$(IMPERAS_HOME)») NOVLNV=1 SRC=OVPsim_linux_ArmIntegratorCP.c include $(IMPERAS_HOME)/ImperasLib/source/buildutils/Makefile.platform
Back to top
DonShah Joined: 28 Apr 2011 Posts: 8	Posted: Wed May 04, 2011 2:25 am    Post subject: licence error Hi Administrator I am getting the folowing error while running simulation. Error (LIC_SRV_NF) License not available. FLEXLM reports: Timeout connecting to internet date server FLEXnet Licensing error:+97,213 Fatal (LIC_SRV_NF) Exiting: Info Exiting I just copy pasted the license file which i received through mail into ovpsim file in Imperas folder. Regards DONSHAH e Solutions Pvt. Ltd
Back to top
DuncGrah OVP Technologist Joined: 27 Feb 2008 Posts: 1660 Location: United Kingdom	Posted: Wed May 04, 2011 2:41 am    Post subject: Quote: These releases contains the precompiled binaries. There is no Makefile present in the Demo/ OVPsim_linux_ArmIntegratorCP in the directory. Ss, is the build support has been removed from the latest version ?? How can I rebuild the package again? Please help. I have checked the package and tried installing myself, there is a Makefile present. I’m not sure why you thought there wasn’t, could you check for me please.
Back to top
LeeMoore OVP Technologist Joined: 27 Feb 2008 Posts: 635	Posted: Wed May 04, 2011 2:41 am    Post subject: Hi Donshah, Part of the Demo/Evaluation licensing check ensures you are connected to the internet. Can you please confirm that you are connected to the internet, for example can you ping www.google.com ? Also, are you running under Linux or Windows ? Many Thanks Lee Moore
Back to top
DonShah Joined: 28 Apr 2011 Posts: 8	Posted: Wed May 04, 2011 4:08 am    Post subject: Hi LeeMoore, Thanks for the replay, i got the solution for that firewall is blocking that to connect to the internet, then i disabled that firewall, now it is working fine. Regards Donshah e Solutions
Back to top
DirkFreyAbb Joined: 09 Aug 2011 Posts: 1	Posted: Fri Sep 16, 2011 2:26 am    Post subject: Hi. I have a similar problem with my licence. Running any example, result in this error: Code: Error (LIC_SRV_NF) License not available. FLEXLM reports: Bad Status connecting to internet date server. Feature: IMP_OVPSIM_20110721 FLEXnet Licensing error:+97,210 Fatal (LIC_SRV_NF) Exiting: Info Exiting Internet access is available through a proxy. (proved by writing this post from the client behind the proxy) It’s a brand new licence and i’ve got the latest OVPsim release from the OVP Site. It seems to me, that OVPsim tries to connect over a specific port which is blocked by the non-local Firewall/proxy. Is there a config file to control which port is used to connect to the internet date server? Or some other solutions to this problem? Regards, Dirk
Back to top
LarryL Joined: 26 Feb 2008 Posts: 119	Posted: Fri Sep 16, 2011 9:28 am    Post subject: There is a workaround to this problem. Please contact license@ovpworld.org for help on this topic. _________________ Larry Lapides Imperas
Back to top
DuncGrah OVP Technologist Joined: 27 Feb 2008 Posts: 1660 Location: United Kingdom	Posted: Wed Jan 08, 2014 2:12 am    Post subject: This is a problem that the OVP simulator (OVPsim) requires access to the internet. It could be that you do not have internet access or it could be that you use a proxy server. Previously OVPsim could not access the internet through a proxy server. OVPsim can now access the internet through most proxy servers. however, this must be setup in your environment using the following (for a bash shell) export IMPERAS_PROXY_SERVER=myproxyserver.com:port where myproxyserver.com is the name of your proxy server port is the port number through which you connect
Back to top
Display posts from previous:

Information regarding OVP © 2008-2023 Imperas Software

This is a new installation of LMtools with Autodesk Design Academy 2008.

Client computers cannot obtain a license from license server. Any ideas? I had 2007 working great last year. I manage the server from a Remote Desktop connection, but I don’t try to run Autocad remotely.

Server Diagnostics message.

———
Diagnostics
———
FLEXnet diagnostics on Mon 1/14/2008 09:15

——————————————————
License file: C:Program FilesAutodesk Network License ManagerLicenselicense.lic
——————————————————
«SAMreport_lite» v3.0, vendor: gsi
uncounted nodelocked license locked to NOTHING (hostid=ANY) starts: 10-jan-2008, no expiration date

This license cannot be checked out because:
Cannot checkout an uncounted license within a Windows Terminal Services guest session.
Feature: SAMreport_lite
License path: C:Program FilesAutodesk Network License ManagerLicenselicense.lic;
FLEXnet Licensing error:-103,577
For further information, refer to the FLEXnet Licensing End User Guide,
available at «www.macrovision.com».
——————————————————
«SAMreport_lite» v3.0, vendor: gsi
uncounted nodelocked license locked to NOTHING (hostid=ANY) starts: 10-jan-2008, no expiration date

This license cannot be checked out because:
Cannot checkout an uncounted license within a Windows Terminal Services guest session.
Feature: SAMreport_lite
License path: C:Program FilesAutodesk Network License ManagerLicenselicense.lic;
FLEXnet Licensing error:-103,577
For further information, refer to the FLEXnet Licensing End User Guide,
available at «www.macrovision.com».
——————————————————
«SAMreport_lite» v3.0, vendor: gsi
uncounted nodelocked license locked to NOTHING (hostid=ANY) starts: 10-jan-2008, no expiration date

This license cannot be checked out because:
Cannot checkout an uncounted license within a Windows Terminal Services guest session.
Feature: SAMreport_lite
License path: C:Program FilesAutodesk Network License ManagerLicenselicense.lic;
FLEXnet Licensing error:-103,577
For further information, refer to the FLEXnet Licensing End User Guide,
available at «www.macrovision.com».
——————————————————
«SAMreport_lite» v3.0, vendor: gsi
uncounted nodelocked license locked to NOTHING (hostid=ANY) starts: 10-jan-2008, no expiration date

This license cannot be checked out because:
Cannot checkout an uncounted license within a Windows Terminal Services guest session.
Feature: SAMreport_lite
License path: C:Program FilesAutodesk Network License ManagerLicenselicense.lic;
FLEXnet Licensing error:-103,577
For further information, refer to the FLEXnet Licensing End User Guide,
available at «www.macrovision.com».

Server Status message

———
Status
———
Flexible License Manager status on Mon 1/14/2008 09:16

[Detecting lmgrd processes…]
Error getting status: No SERVER lines in license file.
License path: C:Program FilesAutodesk Network License ManagerLicenselicense.lic;
FLEXnet Licensing error:-13,66
For further information, refer to the FLEXnet Licensing End User Guide,
available at «www.macrovision.com».

samlite license file sent to us.

INCREMENT SAMreport_lite gsi 3.0 1-jan-0 0 4D28E07A08878B4E0F4A
VENDOR_STRING=»VENDOR:adskflex HOSTID:0017a437906f» HOSTID=ANY
NOTICE=»For use only by Macrovision SN=W13691″
INCREMENT SAMreport_lite gsi 3.0 1-jan-0 0 6DB8A05A092B16ABC609
VENDOR_STRING=»VENDOR:sgiawd HOSTID:0017a437906f» HOSTID=ANY
NOTICE=»For use only by Macrovision SN=W13691″

The HOSTID is correct.

now on win10/vs2017 current:
these two messages should never appear (remove any online/download license requirements from free products, «does not require a license», so why does it require then):

vsim: (even if the online provided license file has been correctly entered in quartus prime license prompt and LM_LICENSE_FILE environment variable).
«Unable to checkout a viewer license necessary for use of the Questa Intel Starter FPGA Edition graphical user interface. Vsim is closing.»

also conflicting setup in init_hls.bat and build.bat in examples, linker in PATH or not:
«HLS Elaborate verification testbench FAILED. See c:/projects/examples/tutorials/ac_datatypes/ac_fixed_constructor/tutorial-fpga.prj/debug.log for details. Error: Cosim testbench elaboration failed.»
«Error: i++: Can’t find the Microsoft linker LINK.EXE. Make sure your Visual Studio is correctly installed and that it’s linker can be found.»
«c:program files (x86)microsoft visual studio2017communityvctoolsmsvc14.16.27023binhostx64x64link.exe : fatal error LNK1107: invalid or corrupt file: cannot read at 0x300»

Error: Missing simulator license for C:intelFPGA_lite22.1stdquesta_fsewin64vsim.exe. Either:
1) Ensure you have a valid ModelSim license
2) Use the —simulator none flag to skip the verification flow

cmd>lmutil lmdiag (for «no license required product», also none of the software should require administrative access console):

lmutil — Copyright (c) 1989-2019 Flexera. All Rights Reserved.
FlexNet diagnostics on Sat 12/3/2022 03:58

——————————————————
License file: C:intelFPGA_lite22.1stdlicensesLR-******_License.dat
——————————————————
«intelqsimstarter» v2023.12, vendor: mgcld, expiry: 2-dec-2023
vendor_string: 2FE1606B
uncounted nodelocked license, locked to ethernet address «********2c» starts: 2-dec-2022, expires: 2-dec-2023

This license cannot be checked out because:
Cannot checkout an uncounted license within a Windows Terminal Services guest session.
Feature: intelqsimstarter
License path: C:intelFPGA_lite22.1stdlicensesLR-********_License.dat;
FlexNet Licensing error:-103,577
——————————————————

edit: using of «lmutil lmdiag» and «vsim» works only locally, not over a rdp session (when license is double copied to c:flexlmlicense.dat & the LM_LICENSE_FILE path).