Smb protocol error 4 046
002-500 RAP Error in CUI scan panel UI detection.
002-770 RAP Insufficient HDD capacity while processing the job template within a job.
003-310 RAP IISS extended memory capacity shortage in spite of «With FaxCard» (below 256MB). After avoiding detection condition of 116-389 at power on, extended memory capacity in document scanning area below 256MB is detected with IITsc-detected FaultCode, while FaxCard is mounted. Limitations at the error occurrence are as follows:
003-318 RAP IIIT software failure.
003-319 RAP IIT Video Driver Detection Fail. An internal processing error occurred in the ESS PWB.
003-320 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 1.)
003-321 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 2.)
003-322 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 3.)
003-323 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 4.)
003-324 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 5.)
003-325 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 6.)
003-326 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 7.)
003-327 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 8.)
003-328 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 9.)
003-329 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 10.)
003-330 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 11.)
003-331 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 12.)
003-332 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 13.)
003-333 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 14.)
003-334 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 15.)
003-335 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 16.)
003-336 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 17.)
003-337 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 18.)
003-338 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 19.)
003-339 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 20.)
003-340 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 21.)
003-341 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 22.)
003-342 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 23.)
003-343 RAP ESS PWB detected a communication failure between IIT and ESS. (IIT-ESS Communication Fail 24.)
003-344 RAP This status code is displayed for a power on hotline failure.
003-345 RAP X PIO Unmatch Fail 1. An abnormality with the X hot line was detected when an X job failure was received from the IIT.
003-346 RAP X PIO Mismatch Fail 2. An abnormality with the X hot line was detected when IIT image delivered was received from the IIT.
003-356 RAP All scanned original sheets judged as Blank by Blank Paper Detection.
003-701 RAP When document being scanned, HWM Detect Hardware detects duplication prevention code in the document data.
003-702 RAP In simultaneous copying operation for both sides of original document, setting where magnification is different between Side1 and Side2 of the same document, is detected.
003-750 RAP Book Duplex-Insufficient Docs. Insufficient original sheets for a duplex book.
003-751 RAP Under PANTHER Capacity (Scan). Was below the PANTHER capacity in the Scan service (IIT sc).
003-752 RAP This status code is displayed if 600dpi cannot be scanned (DADF).
003-753 RAP This status code is displayed if over 300dpi cannot be scanned (DADF).
003-754 RAP S2X Recoverable Error. A ‘can recover?’ error was reported by the S2X.
003-755 RAP S2X Command Error. S2X returned a command error.
003-757 RAP This status code is displayed if over 400dpi cannot be scanned (DADF).
003-760 RAP Scan Settings Error. Read settings were incorrect.
003-761 RAP Incorrect Paper Tray Size. The paper size for the previously selected tray is different from the paper size that was selected with APS.
003-763 RAP Adjustment Chart Not Found. Error reading the contrast correction chart.
003-764 RAP Image Overlay Document Shortage. Only for B/W, not color.
003-780 RAP Scan Image Compression Error. Read image compression error.
003-795 RAP AMS Limit Error. When using the automatic magnification specification (AMS) it was outside the magnification range (25%
400%) after the original was automatically detected.
003-930 Cannot Scan Over 300DPI RAP Due to insufficient DAM memory space, A3 original cannot be scanned with specified resolution. A4/B4 original can be scanned. 300dpi/400dpi/600dpi disabled with DADF Mix Duplex Mode Scan.
003-931 Cannot Scan Over 400DPI RAP Due to insufficient DAM memory space, A3 original cannot be scanned with specified resolution. A4/B4 original can be scanned. 400dpi/600dpi disabled with DADF Mix Duplex Mode Scan.
003-932 Cannot Scan Over 600DPI RAP Due to insufficient DAM memory space, A3 original cannot be scanned with specified resolution. A4/B4 original can be scanned. 400dpi/600dpi disabled with DADF Mix Duplex Mode Scan.
003-933 Cannot Scan Over 600DPI RAP Due to insufficient DAM memory space, A3 original cannot be scanned with specified resolution. A4/B4 original can be scanned. 300dpi/400dpi/600dpi disabled with DADF Mix Duplex Mode Scan.
003-934 Cannot Scan Over 400DPI RAP Due to insufficient DAM memory space, A3 original cannot be scanned with specified resolution. A4/B4 original can be scanned. 400dpi/600dpi disabled with DADF Mix Duplex Mode Scan.
003-935 Cannot Scan Over 600DPI RAP Due to insufficient DAM memory space, A3 original cannot be scanned with specified resolution. A4/B4 original can be scanned. 600dpi disabled with DADF Mix Duplex Mode Scan.
003-940 RAP This status code is displayed if the DAM Memory is insufficient.
003-942 RAP Document Size Error. The size of the original could not be automatically recognized.
003-944 RAP Image Repeat Count Fail. The image repeat count was incorrect, so images have been omitted.
003-946 RAP Copy Vertical/Horizontal Difference (APS). Without rotation the image would be truncated, but a paper size that cannot be rotated was selected.
003-947 RAP Replaced Original Count Error. The number of original sheets replaced by the user was less than the number of original sheets originally put into position.
003-948 RAP Replaced Original MismatchThe originals that have been put into position are different (original size, direction, or ACS color mode) from those before the replacement.
003-951 One Job Max Page Over Limit RAP Over the limit of pages being scanned in one job.
003-952 RAP Return Documents Color mismatch. The originals were replaced but the color of the originals replaced by the user was different.
003-955 RAP Documents Size Exchange Error. The function to prohibit mixed-size originals was selected but, when originals were added, originals of a different size or direction were detected.
003-956 RAP Documents Size Unknown Error. The platen was selected and the size of the original cannot be specified (only applies to APS).
003-963 RAP No Auto Paper Select Object Tray
003-965 RAP ATS/APS No Paper. There is no paper in the trays that can be selected with APS.
003-966 RAP AATS/APS No Destination Error. There are no trays that can be selected with APS.
003-967 RAP DADF APS No Destination.
003-968 RAP Punch Position Error. It is not possible to punch at the selected location.
003-969 RAP Punch Size Error. It is not possible to punch with the selected paper size.
003-971 RAP Duplication Restriction Code detected in original document while Duplication Restriction Code Detection Temporary Cancel Authorization user performs Scan job.
003-972 RAP Maximum Stored Page Over Flow. The number of original sheets exceeded the maximum number of sheets that can be stored.
003-973 RAP Every Direction DifferenceThe directions of the original and the image are different, and the image would be truncated if it isn’t rotated, but it isn’t possible to rotate.
003-974 RAP Next Original Specification All the originals that were put into position have been scanned.
003-976 FAX Line Memory Overflow (N up) RAP The number of SlowScan lines exceeds upper limt(65535) due to FAX 2 in one or Long Document expansion or Page Memory Full occurs.
003-977 RAP Document Mismatch (Multi Scan). The originals were replaced during consecutive page copying or duplex book scanning.
003-978 RAP Color Document Mismatch (Multi Scan).
003-980 RAP Staple Position Error. It is not possible to staple at the specified location.
003-981 RAP Staple Size Error. It is not possible to staple with the selected paper size.
003-982 RAP IITsc HDD Access Error. HDD was determined to be full during a collation job, destination storage job, or insertion job.
005-121 RAP DADF Feed Sensor ON Jam
005-122 RAP DADF Simplex/Side 1 Pre Reg Sensor ON Jam
005-123 RAP DADF Simplex/Side 1 Reg Sensor ON Jam. The Reg Sensor did not come on within a given time after the Pre Reg Sensor came on.
005-124 RAP DADF Lead Reg Sensor ON Jam. The Lead Reg Sensor did not come on within a given time after the start of reading (Reg motor ON).
005-125 RAP DADF Reg Sensor OFF Jam. The Lead Reg Sensor did not turn off within a given time after the start of reading (Reg Motor ON).
005-126 RAP DADF Out Sensor ON Jam. The Out Sensor did not come on within a given time after the start of reading (Reg Motor ON).
005-127 RAP DADF Out Sensor OFF Jam. The Out Sensor did not turn off within a given time after the Reg Sensor turned off.
005-128 RAP DADF Exit Sensor 1 ON Jam (Simplex Mode). In simplex mode, Exit Sensor #1 did not come on within a given time after the Out Sensor turned off.
005-129 RAP DADF Exit Sensor 1 OFF Jam (Simplex Mode). In simplex mode, Exit Sensor #1 did not turn off within a given time after the Out Sensor turned off.
005-130 RAP DADF Invert Sensor ON Jam (Duplex Mode). In duplex mode, the Invert Sensor did not come on within a given time after the Out Sensor came on.
005-133 RAP DADF Invert Sensor OFF Jam. In duplex mode, the Invert Sensor did not turn off within a given time after the Out Sensor turned off.
005-135 RAP DADF Pre Reg Sensor ON Jam (Invert). During an invert operation the Pre Reg Sensor did not come on within a given time after the start of the Feed Motor reverse revolution.
005-136 RAP DADF Reg Sensor ON Jam (Invert). During an invert operation the Reg Sensor did not come on within a given time after the Pre Reg Sensor came on.
005-137 RAP DADF Exit Sensor 2 ON Jam. During a reverse revolution expelling operation, Exit Sensor #2 did not come on within a given time after the start of the Feed Motor reverse revolution.
005-138 RAP DADF Exit Sensor 1 ON JamDuring a reverse revolution expelling operation, Exit Sensor #1 did not come on within a given time after Exit Sensor #2 came on.
005-139 RAP DADF Invert SNR off Jam.
005-141 RAP DADF Feed Sensor OFF Jam. The Pre Reg Sensor turned off before the Feed Sensor turned off.
005-142 RAP DADF Exit Sensor 1 OFF Jam (Duplex Mode). During a reverse revolution expelling operation, Exit Sensor #1 did not turn off within a given time after Exit Sensor #1 came on.
005-143 RAP DADF Exit Sensor 2 OFF Jam. Exit sensor #2 did not turn off within a given time after Exit Sensor #2 came on.
005-144 RAP DADF Too First Pre Reg Sensor ON Jam. The pre Reg Sensor came on before a given time due to original skew.
005-150 RAP DADF Feed Sensor OFF Jam (Perforated Original Mode). In perforated original mode, the Feed Sensor did not turn off within a given time after the Feed Sensor came on.
005-151 RAP DADF Pre Reg Sensor OFF Jam (Perforated Original Mode). In perforated original mode, the pre Reg Sensor did not turn off within a given time after the pre Reg Sensor came on.
005-152 RAP DADF Reg Sensor OFF Jam (Perforated Original Mode). In perforated original mode, the Reg Sensor did not turn off within a given time after the Reg Sensor came on.
005-153 RAP DADF Reg Sensor OFF Jam (Perforated Original Mode). In perforated original mode, the lead Reg Sensor did not turn off within a given time after the lead Reg Sensor came on.
005-154 RAP DADF Out Sensor OFF Jam (Perforated Original Mode). In perforated original mode, the Out Sensor did not turn off within a given time after the Out Sensor came on.
005-155 RAP DADF Exit Sensor 1 OFF Jam (Perforated Original Mode) (Simplex). In perforated original mode, Exit Sensor #1 did not turn off within a given time after Exit Sensor #1 came on (simplex).
005-156 RAP DADF Exit Sensor 1 OFF Jam (Perforated Original Mode) (Duplex). In perforated original mode, Exit Sensor #1 did not turn off within a given time after Exit Sensor #1 came on (duplex).
005-157 RAP DADF Invert Sensor OFF Jam (Perforated Original Mode). In perforated original mode, the Invert Sensor did not turn off within a given time after the Invert Sensor came on.
005-158 RAP DADF Exit Sensor 2 OFF Jam (Perforated Original Mode). In perforated original mode, Exit Sensor #2 did not turn off within a given time after Exit Sensor #2 came on.
005-160 RAP DADF Tray Lift Up Fail (Document Set) (Within Job). The originals were put into position and the Stack Height sensor did not come on within a given time after the tray began rising. Or, it was detected that the Bottom Sensor did not turn off. (Detected during run, stop, or purge.).
005-190 RAP DADF Feed Motor Logic Jam.
005-194 RAP Size Mismatch Jam on Slow Scan Mix Size. ‘Secondary scan mix’ was specified and it was detected that the size in the main scan direction was different from the width of the originals guide.
005-195 RAP Size Mismatch Jam on No Mix Size. It was detected that the originals have different sizes, but original size mix mode was not selected.
005-196 RAP Size Mismatch Jam on No Mix Size. It was detected that the second or later original sheet had a different size from that of the first original.
005-197 RAP Prohibit Combine Size Jam. A size that does not allow combining was detected.
005-198 RAP Too Short Size Jam. The originals could not be transported because the length was too short in the secondary scan direction. (When the leading edge of the original reached the Pre Reg Sensor the trailing edge had already passed the Feed Sensor.).
005-199 RAP Too Long Size Jam. Originals were detected that were longer than the secondary scan length that the DADF can transport.
005-275 RAP DADF RAM Fail. An error was detected in the DADF PWB RAM. (Checked when power is switched on.).
005-280 RAP DADF EEPROM Fail. A write error to DADF EEPROM or a communication error with EEPROM was detected.
005-281 RAP DADF Tray Lift Down Fail. The Bottom Sensor did not come on within a given time after the DADF tray began to lower.
005-282 RAP DADF Tray Lift Up Fail (No Document). During the initializing movement when no document had been put into position, the Bottom Sensor did not turn off within a given time after the tray began to rise.
005-283 RAP DADF Stack Height Sensor Logic Fail.
005-284 RAP DADF APS Sensor Logic Fail. There is a logical inconsistency among the outputs of APS Sensors 1
Источник
- Go Back
- Blog
- Xerox® VersaLink® C500 C505 C600 C605 Error Codes
Xerox® VersaLink® C500 C505 C600 C605 Error Codes
21st June 2021
Having problems? here’s a handy list of Xerox error codes that will help you identify the problem.
If the problem continues, send us an email to sales@xentair.com and we can help you further.
002-500 ui control panel error | 003-311 iit cdi I/f mismatch | 003-318 003-319 iit software fail | 003-320 to 003-343 iiss-ess communication fail | 003-344 iiss-ess x hotline fail 003-345 003-346 x pio mismatch error | 003-700 returned documents error | 003-701 duplication prevention code error | 003-702 different magnification error | 003-703 003-704 colour correction error | 003-705 energy saving paper size mismatch error | 003-750 insufficient documents duplex book error | 003-751 capacity error | 003-752 932 935 600dpi cannot be scanned error | 003-753 913 930 933 300dpi cannot be scanned error | 003-754 003-756 s2x error | 003-757 931 934 400dpi cannot be scanned error | 003-760 003-761 scan settings error | 003-763 adjustment chart not found error | 003-764 document insufficient (image overlay) error | 003-780 scan image compression error | 003-795 ams limit error | 003-940 insufficient memory error | 003-941 insufficient page memory error | 003-942 003-956 document size auto detect error | 003-944 repeat image count fail error | 003-946 image rotation (copy aps) error | 003-947 948 document error | 003-952 document colour mismatch error | 003-955 documents size exchange error | 003-956 documents size unknown error | 003-963 and 003-966 ats/aps error | 003-965 ats/aps error | 003-970 003-976 fax line memory error | 003-971 prevention code detect with the right to cancel error | 003-972 maximum stored page error | 003-973 image rotation error | 003-974 next original specification error | 003-977 document mismatch (multi scan) error | 003-978 colour document mismatch (multi scan) error | 005-121 123 124 900 906 908 911 940 947 948 dadf jam error | 005-194 size mismatch jam on ss mix size error | 005-198 too short size jam error | 005-199 too long size jam error | 005-210 dadf download fail error | 005-275 dadf ram fail error | 005-280 dadf eeprom fail error | 005-305 dadf jam error | 005-941 not enough documents error | 010-105 010-106 fusing assembly exit sensor error | 010-321 fusing unit nip fail error | 010-329 to 010-346 fusing assembly hr error | 010-420 and 010-421 fusing assembly life error | 011-101 and 011-102 mbx vertical sensor error | 011-210 and 011-334 mbx nvm and downloader fail error | 011-301 mbx rear cover open error | 011-912 mbx static jam error | 011-941 to 011-944 mbx static jam error | 012-122 compile tray exit sensor off jam error | 012-152 compile tray exit sensor on jam error | 012-161 finisher set eject jam error | 012-210 and 012-334 finisher nvm and downloader fail error | 012-211 to 012-213 stacker tray fail error | 012-239 to 012-240 finisher sub-paddle home sensor on/off fail error | 012-259 to 012-280 finisher eject home sensor on/off fail error | 012-283 to 012-284 finisher set clamp home sensor on/off fail error | 012-290 staple cover interlock 24v disconnect fail error | 012-291 stapler fail error | 012-405 stapler near empty error | 012-912 finisher static jam error | 013-286 and 013-287 right tamper home snr on/off fail error | 013-288 and 013-289 left tamper home snr on/off fail error | 014-302 finisher rear cover interlock open error | 014-303 staple cover interlock open error | 016-210 506 777 780 798 hdd error | 016-211 016-212 sw option fail memory low error | 016-214 sw option fail (fax card) error | 016-234 016-235 xcp error | 016-242 system gmt clock fail error | 016-244 self-signed certificate auto update fail error | 016-310 ssmm job log full error | 016-311 315 319 354 scanner/iit error | s error | 016-314 sw option fail (hybrid watermark) error | 016-320 document formatter fatal error | 016-321 fax module error | 016-323 b-formatter fatal error | 016-324 scheduled image overwrite error | 016-325 using personal certificate error | 016-326 362 607 ui cable connection fail error | 016-328 connection fail error | 016-330 to 016-332 cont system memory fail error | 016-342 to 016-345 controller fail error | 016-346 cont a4fax modem diagnosis fail error | 016-349 to 016-351 emmc card error | s error | 016-352 609 610 internal network init/pci/pciex fail error | 016-353 356 606 iot-controller communication fail error | 016-354 iot-controller communication fail error | 016-355 016-356 controller asic fail error | 016-359 360 361 controller usb fail error | 016-360 016-362 controller ui fail error | 016-366 016-367 controller hdd fail error | 016-371 controller usb 1.1 host fail error | 016-383 controller os communication fail error | 016-400 401 402 403 406 802.1x authentication failure — network1 error | 016-404 802.1x inside failure error | 016-405 certificate db file error | 016-407 to 016-412 xcp error | 016-421 input tray is removed error | 016-422 016-423 offline error | 016-424 016-425 power mode error | 016-426 dhcp error | 016-427 428 429 430 431 432 802.1x failures (network 2) error | 016-450 smb host name duplicated error | 016-453 016-454 ipv6/dynamic dns failure error | 016-455 016-456 sntp time out error | 016-461 under non-transmitted image log stagnation error | 016-500 rom write error | (during dld method) error | 016-503 to 016-505 smtp server fail for redirector error | 016-506 imagelog hdd full error | 016-507 016-508 image log send fail error | 016-509 016-510 image log no send rule error | 016-511 016-512 image log invalid send rule error | 016-513 smtp server reception error | 016-514 xps error | 016-515 xps short of memory 016-516 xps print ticket description error | 016-518 ps booklet conflict wm error | 016-519 device dv limit reached error | 016-521 smartcard not found error | 016-522 ldap ssl error | 112 error | 016-523 ldap ssl error | 113 error | 016-524 016-525 ldap ssl error | 114 and 115 error | 016-526 ldap ssl error | 116 error | 016-527 ldap ssl error | 117 error | 016-528 smart card not authorised error | 016-529 remote download server timeout error | 016-533 kerberos attestation protocol error | 37 error | 016-534 kerberos attestation protocol error | 41 and 42 error | 016-535 remote download file access error | 016-536 host name solution error | in remote download error | 016-537 remote download server connection error | 016-538 remote download file write error | 016-539 kerberos attestation other protocol error | 016-543 545 546 548 553 554 555 556 557 558 attestation agent error | 016-559 remote download parameter error | 016-560 attestation agent error | 560 error | 016-562 detected user duplication error | 016-563 imagelog memory full (exp. Kit) error | 016-564 remote download server authentication failed error | 016-565 backup restore error | 016-566 backup restore condition error | 016-567 backup capacity full error | 016-568 backup restore failed error | 016-570 job ticket out of memory error | 016-571 job ticket wrong parameters error | 016-572 job ticket media error | 016-573 job ticket parse error | 016-574 ftp host name solution error | 016-575 ftp dns server error | 016-576 ftp server connection error | 016-577 ftp service error | 016-578 ftp login name or password error | 016-579 ftp scanning picture preservation place error | 016-580 ftp file name acquisition failure error | 016-581 ftp file name suffix limit error | 016-582 016-588 ftp file creation failure error | 016-583 016-584 ftp folder creation failure error | 016-585 587 589 ftp file delete/read failure error | 016-586 ftp lock folder delete failure error | 016-590 ftp data reading failure error | 016-591 ftp scan filing policy error | 016-592 ftp dat file access error | 016-593 to 016-596 ftp error | 016-597 same file on ftp server error | 016-598 016-599 email message size error | 016-600 016-601 ko authentication locked error | 016-604 debug log created error | 016-606 016-608 controller connection fail error | 016-609 016-610 pci option fail error | 016-611 emmc card connection fail error | 016-700 password below minimum error | 016-701 out of art ex memory error | 016-702 out of page buffer error | 016-703 email to invalid box error | 016-704 mailbox full error | 016-705 secure print fail error | 016-706 maximum user number exceeded error | 016-707 sample print fail error | 016-708 annotation/watermark hdd full error | 016-709 art ex command error | 016-710 delayed print fail error | 016-711 email transmission size limit error | 016-712 panther capacity error | 016-713 016-714 security box error | 016-715 escp form invalid password error | 016-716 tiff data overflow error | 016-717 fax send result not found error | 016-718 out of pcl6 memory error | 016-719 out of pcl memory error | 016-720 pcl command error | 016-721 and 016-722 settings error | 016-725 b-formatter library image conversion error | 016-726 pdl auto switch fail error | 016-727 unstorable document error | 016-728 unsupported tiff data error | 016-729 tiff data size error | 016-731 016-732 invalid data error | 016-733 destination address resolution error | 016-735 updating job template error | 016-741 download mode fail error | 016-742 download data product id mismatch error | 016-743 device model/panel type error | 016-744 download data checksum error | 016-745 download data xpjl fatal error | 016-746 016-751 unsupported pdf file error | 016-747 drawing annotation memory error | 016-748 774 775 778 981 hdd full error | 016-749 jcl syntax error | 016-750 print job ticket description error | 016-752 pdf short of memory error | 016-753 pdf password mismatched error | 016-755 pdf print prohibited error | 016-756 auditron-prohibit service error | 016-757 auditron invalid user error | 016-758 auditron disabled function error | 016-759 auditron limit reached error | 016-760 ps decompose failure error | 016-761 fifo empty error | 016-762 print language not installed error | 016-763 pop server connect error | 016-764 smtp server connect error | 016-765 016-766 smtp server error | 016-767 invalid email address error | 016-768 invalid sender address error | 016-769 smtp server unsupported dsn error | 016-770 direct fax function canceled error | 016-772 scan data repository error | 016-776 image conversion error | 016-779 scan image conversion error | 016-781 server connect error | 016-786 hdd full scan write error | 016-788 retrieve to browser failed error | 016-790 email fragment over error | 016-792 specified job not found error | 016-794 media not inserted error | 016-795 media reader format error | 016-796 document insert operation error | 016-797 image file read error | 016-799 plw print instruction fail error | 016-910 016-911 required resource not ready error | 016-917 to 016-919 toner y/m/c life end error | 016-940 to 016-949 incorrect job settings error | 016-982 hdd access error | 2 error | 016-983 image log hdd full error | 016-985 scan to email data size error | 017-500 job limit illegal response error | 017-501 multiple permission restrictions error | 017-503 password over maximum error | 017-504 017-505 017-506 joblimit server connection fail error | 017-507 disabled direct print error | 017-713 start tls unsupported fail error | 017-714 smtp over ssl fail error | 017-715 ssl certificate fail error | 017-716 to 017-718 ssl certificate (smtp) fail error | 017-719 smtp over ssl internal fail error | 017-720 017-721 pjl command fail error | 017-722 total impressions over fail error | 017-723 docuworks unsupported character fail error | 017-725 forced annotation syntax fail error | 017-728 scan job-flow document fail error | 017-729 temporary error | in pdl transfer error | 017-730 network error | in pdl transfer error | 017-731 pop server not connected error | 017-732 offline error | in pdl transfer error | 017-733 internal error | in pdl transfer error | 017-734 ipp data error | 017-735 unauthorised auditron user error | 017-737 017-738 017-746 out of memory fail error | 017-739 017-740 transfer service not available error | 017-741 custom transfer invalid plug-in error | 017-742 to 017-744 custom transfer plug-in connection error | 017-747 custom transfer plug-in connection timeout error | 017-748 custom transfer plug-in invalid device error | 017-749 custom transfer plug-in xml fail error | 017-750 custom transfer plug-in internal fail error | 017-751 custom transfer plug-in other fail error | 017-755 software download via network fail error | 017-759 download data inspection error | 017-760 017-766 pop over ssl fail error | 017-761 017-767 ssl server cert untrusted (pop) error | 017-762 763 764 768 769 770 ssl certificate (pop) fail error | 017-765 017-771 pop over ssl internal fail error | 017-772 scan all blank page fail error | 017-773 netlog task error | 017-774 message lost error | 017-775 network api error | 017-776 017-777 syslog server error | 017-778 queue error | 017-779 link error | 017-780 held job timeout error | 017-782 784 85 786 custom image processing plug-in error | 017-783 custom image processing memory error | 017-787 google cloud print data error | 017-789 job limit estimation logic fail error | 017-790 to 017-799 print permission error | 018-400 ipsec configuration mismatch error | 018-405 user account disabled error | 018-406 setting status of ip address (ipv4) error | 018-407 setting status of ip address (ipv6) error | 018-408 018-429 018-430 duplicate ip address ipv4 (wifi) error | 018-409 412 413 duplicate ipv6 address 1 error | 018-410 018-411 dynamic dns update failure error | 018-414 duplicate ipv6 address 2 error | 018-415 duplicate ipv6 address 3 error | 018-416 duplicate ipv6 address 4 error | 018-424 wlan wpa-enterprise certificate empty failure error | 018-425 wlan wpa-enterprise certificate unavailability failure error | 018-426 wlan wpa-enterprise server certificate failure 018-427 duplicate ip address range wi-fi and wi-fi direct 018-428 wlan module connection failure error | 018-431 duplicate ipv6 address (wifi) error | 018-432 duplicate ipv6 address (wifi) error | 018-433 duplicate ipv6 address (wifi) error | 018-434 duplicate ipv6 address (wifi) error | 018-435 duplicate ipv6 address (wifi) error | 018-436 duplicate ipv6 address (wifi) error | 018-439 018-440 018-441 wi-fi direct stops error | 018-500 501 503 504 506 507 508 ca server error | 018-502 smb login failure error | 018-505 smb-dos protocol error | 018-509 template parameter conflict error | 018-524 invalid device network setting error | 018-525 hdd full or access error | 018-526 to 529 531 532 cui scan error | 018-530 authentication error | 018-543 shared name error | in smb server error | 018-547 smb scan users restriction error | 018-556 http server script error | 018-557 http invalid character in filename error | 018-558 http file not found error | 018-559 http file duplication fail error | 018-560 to 018-563 http server login fail error | 018-564 host name solution error | in http error | 018-565 proxy name solution error | in http error | 018-566 018-567 server connect error | in http error | 018-568 http server ssl access fail error | 018-569 http server certificate fail error | 018-570 http certificate fail error | 018-571 internal error | in scan error | 018-587 file duplication fail error | 018-588 scan filing policy invalid error | 018-589 nextname file error | 018-590 same name exists error | 018-591 file name suffix over limit error | 018-592 018-593 lock folder fail error | 018-595 detected user duplication error | 018-596 018-700 network error | 018-701 to 018-705 ldap protocol error | s 01 to 05 error | 018-709 active communication is unavailable now fail error | 018-710 to 018-714 ldap protocol error | s 10 to 14 error | 018-715 kerberos attestation protocol error | 73 error | 018-716 to 018-721 ldap protocol error | s 16 to 21 error | 018-722 gcp network fail error | 018-723 018-740 gcp certification fail error | 018-724 gcp ssl connection fail error | 018-725 kerberos attestation protocol error | 22 error | 018-726 kerberos attestation protocol error | 70 error | 018-727 kerberos attestation protocol error | 71 error | 018-728 kerberos attestation protocol error | 72 error | 018-729 730 731 740 738 739 743 744 745 746 gcp network fail error | 018-732 to 018-736 ldap protocol error | s 32 to 36 error | 018-737 018-741 gcp other fail error | 018-747 server not found in smb error | 018-748 750 751 752 753 754 ldap protocol error | s 48 50 to 36 error | 018-749 ldap protocol error | 49 error | 018-755 server connection error | in smb error | 018-756 server login response timeout in smb error | 018-757 host name solution error | in smb error | 018-758 018-759 picture preservation or file name error | 018-760 dfs link error | in smb error | 018-761 out of server memory in smb error | 018-762 server response timeout in smb error | 018-763 character convert error | in smb error | 018-764 to 018-769 018-771 ldap protocol error | s error | 018-770 ldap protocol error | 70 error | 018-772 shared name not found in server error | 018-773 shared name error | in server error | 018-780 to 018-784 ldap protocol error | s 80 and 82 to 84 error | 018-781 ldap protocol error | 81 error | 018-785 ldap protocol error | 85 error | 018-786 to 797 ldap protocol error | s 86 to 97 error | 01a +5vdc power fault error | 01b +24vdc power fault error | 021-210 to 021-212 usb ic card reader error | 021-214 usb ic card reader encryption setting error | 021-401 usb ic card reader connection error | 021-505 021-506 ssl error | 021-509 515 516 522 invalid message detected error | 021-523 internal error | 021-524 to 012-528 communications error | 021-533 021-534 unsupported rom set error | 023-500 ui rom download fail error | 023-600 023-601 ui key error | 024-312 313 314 315 iot nvm backup restore error | 024-322 and 024-223 seeprom refurbish fail error | 024-340 to 024-360 iot-ess communication fail 1 error | 024-361 invalid iot paper size error | 024-362 024-363 page sync illegal start or stop error | 024-364 dma transfer fail error | 024-365 overflow on loop back write error | 024-366 jbig library other fail error | 024-367 decompress other fail error | 024-368 pci error | 024-370 marker code detection fail error | 024-371 372 373 375 iot-ess communication fail 2 error | 024-376 iot-ess communication fail 25 error | 024-600 to 024-614 counter repair error | 024-615 iot unsupported drum shut off error | 024-616 to 024-618 serial number error | 024-619 to 024-621 product number error | 024-701 invalid instruction of face inversion error | 024-702 paper jam error | 024-705 forced annotation template fail error | 024-707 duplex inversion prohibited (duplex) error | 024-708 duplex inversion prohibited (face down) error | 024-746 024-747 print request failure error | 024-748 bates numbering digit exceeded error | 024-910 and 024-959 tray 1 size mismatch error | 024-911 and 024-960 tray 2 size mismatch error | 024-912 and 024-961 tray 3 size mismatch error | 024-913 and 024-962 tray 4 size mismatch error | 024-916 finisher stacker mix full stack error | 024-917 stacker tray staple set over count error | 024-920 center output tray is full error | 024-923 to 024-925 toner cartridge empty error | 024-933 024-940 024-941 drum cartridge life end error | 024-934 paper type mismatch error | 024-946 tray 1 out of place error | 024-947 to 024-949 and 028-989 tray 2 3 4 5 out of place error | 024-950 tray 1 empty error | 024-951 to 024-953 tray 2 3 4 out of paper error | 024-954 msi tray out of paper error | 024-958 bypass tray size mismatch error | 024-965 024-966 ats/aps error | 024-967 and 024-968 stapler paper mixed width and batting error | 024-976 finisher staple status ng error | 024-977 staple cartridge fault error | 024-979 finisher stapler near empty error | 024-980 finisher tray full error | 024-982 stacker lower safety warning error | 025-596 025-597 hdd diagnostics error | 026-400 usb host connection number exceeded error | 026-402 changed iot speed error | 026-403 stop printing and wait for toner cooling error | 026-700 ldap protocol error | 026-701 address book request overflow error | 026-702 address book directory service overflow error | 026-703 abort with logout error | 026-708 url data over size error | 026-709 url hdd full error | 026-710 s/mime unsupported cipher error | 026-711 multi-page file size error | 026-712 http out job overlap error | 026-718 ps print instruction fail error | 026-719 internal error | in scan error | 026-720 to 026-723 media error | 026-726 inconsistent options error | 026-727 media filepath fail error | 026-728 026-729 wsd scan error | 026-730 tray paper size not detected error | 026-731 to 026-733 pjl fail error | 026-734 pjl diag mode error | 026-739 waiting scan job deleted error | 027-442 to 027-444 duplicate ip address 1 error | 027-445 illegal ip address error | 027-446 duplicate ip address 2 error | 027-447 duplicate ip address 3 error | 027-452 duplicate ip address 4 error | 027-500 smtp server fail for mail io error | 027-501 pop server fail for mail io error | 027-502 pop authentication fail for mail io error | 027-503 504 533 773 785 786 server communication timeout error | 027-513 smb scan client access error | 027-514 host name solution error | in smb error | 027-515 dns server setup in smb error | 027-516 server connection error | in smb error | 027-518 login name or password error | in smb error | 027-519 scanning picture preservation place error | 027-520 file name acquisition failure error | 027-521 file name suffix limit over in smb error | 027-522 file creation failure in smb error | 027-523 lock folder creation failure in smb error | 027-524 folder creation failure in smb error | 027-525 027-527 file delete failure in smb error | 027-526 lock folder delete failure in smb error | 027-528 data write failure to smb server error | 027-529 data read failure from smb server error | 027-530 file name duplicate failure in smb error | 027-531 smb scan filing policy injustice error | 027-532 nextname file access error | in smb error | 027-543 smb server name specification error | 027-547 027-548 smb protocol error | s 1 error | 027-549 572 573 574 576 smb protocol error | 4-009 error | 027-564 smb protocol error | 4-024 error | 027-565 027-578 smb protocol error | s 2 error | 027-566 smb protocol error | 4-026 error | 027-569 smb (tcp/ip) not started error | 027-584 smb protocol error | 4-044 error | 027-585 smb protocol error | 4-045 error | 027-586 smb protocol error | 4-046 error | 027-587 smb protocol error | 4-047 error | 027-588 027-589 smb protocol error | s 3 error | 027-590 smb protocol error | 4-050 error | 027-591 smb protocol error | 4-051 error | 027-700 mail address domain error | 027-701 disconnected network cable error | 027-702 to 027-706 027-709 certificate for addresses error | 027-710 to 027-716 s/mime mail error | 027-717 no mx record at dns error | 027-720 027-721 extension server error | 027-722 extension server timeout error | 027-723 extension server authentication fail error | 027-724 to 027-726 extension server access fail error | 027-727 extension server parameters error | 027-728 extension server file exceeded error | 027-730 smtp mail division error | 027-732 server access error | 027-733 server ssl error | 027-734 server certificate error | 027-735 device ssl configuration error | 027-736 device certificate error | 027-737 template server read error | 027-739 invalid template server path error | 027-740 template server login error | 027-741 template server connect fail error | 027-742 hdd file system full error | 027-743 template server install error | 027-744 template server error | 1 error | 027-745 template server error | 2 error | 027-746 job template pool server not ready error | 027-750 fax document incongruent error | 027-751 job template analysis error | 027-752 required user entry not entered error | 027-753 job flow service request disabled error | 027-754 job flow service file signature mismatch error | 027-757 extension server ssl fail error | 027-758 system credential setting error | 027-759 reference server connection error | 027-760 xjt command fail error | 027-761 web print timeout error | 027-762 illegal web print job ticket error | 027-763 auditron cannot check user error | 027-764 airprint scan data transfer fail error | 027-765 host name solution error | in webdav error | 027-766 proxy name solution error | in webdav error | 027-767 webdav server ssl access fail error | 027-768 webdav server certificate fail error | 027-769 webdav server access fail error | 027-772 773 774 776 smtp server error | 027-775 too many smtp addresses error | 027-777 smtp server non support error | 027-778 no mode specified by smtp-auth error | 027-779 attestation-fails by smtp-auth error | 027-780 webdav network interface fail error | 027-781 webdav spool size over error | 027-782 webdav server redirector limit error | 027-783 webdav user authentication error | 027-784 webdav proxy server authentication error | 027-785 027-786 webdav server time-out error | 027-787 webdav file name duplication fail error | 027-788 027-793 webdav request fail error | 027-789 791 795 access forbidden error | 027-790 webdav file not found error | 027-794 webdav server internal fail error | 027-796 email not printed error | 027-797 invalid output destination error | 027-798 jfs target document not found error | 027-799 webdav server insufficient storage error | 028-910 wrong fuser type error | 028-986 and 028-987 paper size/no paper detected error | 028-988 and 028-990 tray 5 size mismatch error | 029-700 029-701 webdav server response error | 029-702 webdav client error | 029-703 airprint scan client error | 029-704 029-711 invalid pacfile error | 029-705 706 709 712 713 716 pacfile communications error | 029-707 708 714 715 pacfile not found error | 029-710 029-717 pacfile url not found error | 029-792 webdav server conflict error | 033-310 fax charge function fail error | 033-311 invalid address book data error | 033-312 318 324 fax fault error | 033-328 to 033-340 failed to initialise fax log error | 033-330 to 033-336 non-mounted channel error | 033-339 fax 2 not responding error | 033-363 fax card reset (reboot) error | 033-500 to 033-507 remote machine error | 033-508 033-511 destination polling error | 033-509 dcs/nss resend exceeded error | 033-510 fallback error | 033-514 516 517 521 522 033-526 to 033-529 remote machine error | 1 error | 033-523 033-546 line not connected error | 033-530 dtmf illegal procedure error | 033-531 532 533 544 552 578 remote machine error | 2 error | 033-535 dcn receive at phase b send error | 033-536 537 540 568 575 577 send/receive error | 033-541 033-566 no destination specified error | 033-543 567 576 702 703 dial error | 033-545 t0 timeout error | 033-547 abort during transmission error | 033-548 no manual send line error | 033-549 551 583 fax service disabled error | 033-550 cannot disable fax service error | 033-553 no folder/relay error | 033-554 wrong password/receive banned error | 033-555 033-556 incorrect password error | 033-557 033-565 destinations or services exceeded error | 033-558 033-559 remote id rejection error | 033-560 561 562 tress/rcc error | 033-563 033-569 no printable paper size error | 033-564 033-570 power off during transmission error | 033-571 033-588 manual send job canceled error | 033-572 fax report print job canceled error | 033-573 domain regulation check error | 033-580 missing voip gateway error | 033-586 t38 protocol not ready error | 033-593 canceled by remote peer error | 033-700 t1 timeout fail error | 033-701 retry timeout error | 033-710 712 713 717 718 719 721 document not found error | 033-716 no specified folder error | 033-724 fax receive memory over flow error | 033-726 728 734 737 738 751 fax printing error | 033-733 735 741 743 744 745 746 750 fax document number error | 041-310 im logic fail error | 041-340 to 041-363 mcu nvm (eeprom) fail error | 041-388 mk logic fail error | 041-603 041-604 temp/humidity sensor fail error | 042-313 rear cooling fan1 fail error | 042-325 main motor fault error | 042-335 device fault (main fan fail) error | 042-336 device fault (sub fan fail) error | 042-348 over temperature detect fail error | 044-329 shutdown fail error | 044-370 sub motor rotation failure error | 045-310 image ready ng error | 045-311 controller communication fail error | 045-370 lph dl fail power error | 045-371 lph dl fail mult error | 047-216 finisher comm fail error | 050-701 paper jam error | 058-310 311 315 316 317 fusing error | 059-314 315 326 fusing error | 059-321 059-324 fusing error | 060-341 to 060-352 lph fault error | 061-354 to 061-357 and 061-362 to 061-393 lph fault error | 061-358 to 061-361 lph config fail error | 062-277 316 399 dadf fail error | 062-300 platen interlock open error | 062-311 313 321 360 371 380 386 389 393 396-398 iit fail error | 062-345 iit eeprom fail error | 062-362 x hard fail error | 062-395 trans power failure detected error | 062-790 recognition fail error | 065-221 to 065-225 cis fail error | 071-101 paper jam in tray 1 error | 071-401 072-401 073-401 074-401 077-407 tray 1 2 3 4 5 feed roll near life error | 071-402 072-402 073-402 074-402 077-408 tray 2 3 4 5 feed roll life over error | 071-404 072-404 073-404 074-404 tray 1 2 3 4 feed roll pre near life error | 072-101 and 072-103 jam in tray 2/tray 3 error | 072-210 and 073-210 tray 2 tray 3 lift up fail error | (hcf only) 072-310 073-310 074-310 tray 2 — 4 motor fail error | 072-311 073-311 074-311 tray 2-4 mode fail error | 072-312 073-312 074-312 077-359 feeder 2 3 4 5 maker mismatch fail error | 073-101 and 074-101 jam in tray 3 tray 4 error | 073-103 and 074-108 path 3 4 paper jam error | 075-100 jam in bypass tray error | 077-101 and 077-119 paper jam error | 077-104 paper jam in the device error | 077-117 option registration on jam error | 077-123 registration sensor jam (duplex) error | 077-300 front cover open error | 077-302 device right side door is open error | 077-314 p/h module logic fail error | 077-322 option comm fail (opf 550) error | 077-323 ph motor fail error | 077-327 feeder composition fail error | 077-909 paper jam error | 082-101 paper jam in tray 5 error | 082-310 tray 5 motor fail error | 082-311 tray 5 mode fail error | 082-400 tray 5 feed roll pre near life error | 089-600 to 089-617 rc fail error | 089-623 to 089-679 led offset correction error | 091-300 device rear door open error | 091-312 hvps cc fail error | 091-313 091-402 091-480 to 482 091-913 to 929 drum/crum error | 091-316 sub motor fail error | 091-400 and 091-405 waste cartridge error | 091-401 to 400-436 drum/crum error | 091-911 waste toner bottle full error | 092-312 to 092-315 atc sensor fault error | 092-318 to 092-321 adc patch system fail error | 092-606 094-310 094-325 094-326 adc/ctd fail error | 092-675 to 092-678 adc tone patch fail error | 092-911 to 092-914 toner cartridge uncertain empty [x] error | 092-916 environment snr sensor fail error | 093-324 deve ymc motor fail error | 093-339 toner or drum crum authentication fail error | 093-400 to 093-425 cartridge near empty error | 093-912 toner cartridge empty [k] error | 093-913 to 093-939 and 096-918 crum error | 094-318 1st btr position fail error | 094-417 ibt near life end error | 094-420 ibt life over error | 094-911 transfer belt position fail error | 099-396 to 099-399 fuser temperature fault error | 102-311 to 102-319 usb dongle error | s error | 102-356 ews soft fail error | 103-314 prohibited originals error | 116-210 and 116-211 media reader error | 116-212 and 116-220 ess error | 116-312 and 116-313 hdd encrypt fail error | 116-314 ethernet address fail error | 116-321 322 328 329 338 software error | 116-323 ess nvram w/r check fail error | 116-324 116-328 exception fail error | 116-325 ess fan fail error | 116-330 336 337 339 353 354 356 361 388 hdd fail error | 116-331 invalid log info error | 116-334 ess nvram data compare fail 116-342 393 394 rom version incorrect error | 116-343 346 357 359 main pwb error | 116-348 349 redirector fail error | 116-355 358 360 363 370 374 379 395 362 117-330 118-311 soft fail error | 116-363 370 373 376 fatal error | 116-364 timer fail error | 116-365 366 368 371 372 373 375 377 sw fail error | 116-378 379 395 mcr/mcc soft fail error | 116-380 ess font rom dimm #1check fail error | 116-381 abl version fail error | 116-382 abl initialise fail error | 116-383 pit lib failure error | 116-384 116-385 dcs/idc software fail error | 116-386 incorrect usb port used for fax error | 116-391 illegal code error | 116-396 error | s140 self test fail error | 116-397 illegal setting area coverage threshold error | 116-399 under initialisation for 10 minutes error | 116-701 out of memory duplex fail error | 116-702 print with substitute font error | 116-703 postscript lang interpreter err error | 116-704 to 116-709 716 717 media reader format error | 116-710 hp-gl/2 overflow error | 116-714 hp-gl/2 commanderror | 116-719 xpif parameter cancelled error | 116-720 pcl memory low page simplified error | 116-721 to 116-728 colour print permissions error | 116-725 hdd full for image log error | 116-738 size/orientation mismatch error | 116-739 741 742 743 out of memory error | 116-740 arithmetic error | 116-746 selected form not registered error | 116-747 116-748 invalid page data error | 116-749 postscript font error | 116-749 postscript font error | 116-752 print job ticket error | 116-790 stapling canceled error | 117-310 wsd scan s/w fail error | 117-312 device self test error | 117-313 geog error | hic region change fail error | 117-314 and 117-315 contract type/geog error | hic region changed error | 117-316 contract manager software fail error | 117-317 117-318 contract manager ppp error | 117-319 and 117-320 emmc fail error | 117-321 117-324 emmc card invalid type fail error | 117-322 emmc card encrypt fail error | 117-323 emmc file access fail error | 117-325 contract manager rtc hardware fail error | 117-326 ess nvram sw access fail error | 117-327 ess nvram emmc card hw access fail error | 117-327 ess nvram emmc card hw access fail error | 117-330 118-311 soft fail error | 117-332 117-335 uninitialised or invalid nvm error | 117-333 348 364 uninitialised or used emmc error | 117-343 log sending parameter fail error | 117-344 invalid user job type fail error | 117-345 ssmm batch setting duration fail error | 117-354 356 358 job limit system fail error | 117-357 tpm fail error | 117-360 date limit exceeding fail error | 117-362 117-363 usb dongle fail error | 117-365 wifi long diag fail error | 118-310 ipsec internal fail error | 121-316 accessory conflict error | 121-318 auth/account settings not supported error | 123-310 to 123-399 ui error | 124-310-314 316 318 322 324 340 356 357 360 id/billing/data mismatch error | … 124-315 317 355 dc132 error | 02 04 and 14 error | 124-319 dc132 error | 08 error | 124-320 seeprom fail error | 124-321 backup sram fail error | 124-323 dc132 06 error | 124-325 billing restoration fail error | 124-326 iot speed not registered error | 124-327 iot speed change fail error | 124-334 to 124-335 ess rom dimm error | 124-337 ess standard ram error | 124-341 351 361 381 391 crum market fail mcu error | 124-342 343 352 362 363 382 383 392 393 crum fail sys error | 124-344 346 348 billing meter mismatch error | 124-345 billing meter type restoration fail error | 124-347 billing count type restoration fail error | 124-349 modal break points restoration fail error | 124-350 354 380 390 crum oem fail all error | 124-359 iot nvm backup restore fail 1 error | 124-372 to 124-374 iot soft fail error | 125-311 314 315 342 psw controller unexpected fail error | 127-310 ess task fatal error | 127-353 354 396 398 399 fatal error | 133-210 to 133-224 133-226 133-701 fax parameter incorrect error | 133-701 replacement character detected error | 133-710 tray select fail error | 500-030 dc612 print ng iot wait state error | 500-033 500-035 diag documents error | 500-990 dc612 printing by any reason error |
- May 31, 2017
ACS- in Technical
- 0Comments
Code Description 010-330 Fusing Unit Motor Fail 010-360 IH Driver Input High Voltage Fail 010-361 IH Driver Input Low Voltage Fail 010-362 IH Driver Surge Fail 010-363 IGBT Temperature High Fail 010-364 IGBT Temperature Sensor Fail 010-367 Input Low Current Fail 010-368 Encoder Pulse Fail 010-369 IH Driver Communication Fail 010-370 IH Driver Freeze Fail 010-371 Heat Belt STS Center Disconnection Fail 010-372 Heat Roll STS Center Over Temperature Fail 010-373 Heat Belt STS Rear Disconnection Fail 010-374 Heat Belt STS Rear Over Temperature Fail 010-375 Heat Belt STS Center Warm Up Time Fail 010-376 Heat Belt STS Rear Warm Up Time Fail 010-377 Fusing Unit On Time Fail 010-378 Heat Belt Rotation Fail 010-379 Fusing Unit Hot Not Ready Return Time Fail 010-380 P/Roll Latch Motor Fail 010-381 Fusing Unit Assy Illegal Fail 010-382 Fusing Unit Thermostat Fail 010-398 Fusing Unit Fan Fail 010-420 Fusing Unit Near Life Warning 010-421 Fusing Unit Life Over Warning 041-310 IM Logic Fail 041-316 IH Driver Interface Fail 041-317 MCU IH Interface Fail 041-325 MCU PWB F2 Blows 041-326 MCU PWB F3 Blows 041-327 MCU PWB F4 Blows 041-328 MCU PWB F5 Blows 041-340 MCU Nvm (EEPROM) Data Fail 041-341 MCU NVM (EEPROM) Access Fail 041-342 MCU Nvm (EEPROM) Buffer Fail 041-345 MD PWB F2 Blows 041-347 Serial I/O Fail 041-348 MD PWB F4 Blows 041-349 MD PWB F6 Blows 041-350 MD PWB F7 Blows 041-351 MD Detect Fail 041-352 MD PWB F5 Blows 041-353 MD PWB F8 Blows 041-354 MD PWB F9 Blows 041-355 MD PWB F10 Blows 041-356 MD PWB F11 Blows 041-357 MD PWB F12 Blows 041-358 MD PWB F13 Blows 041-359 MD PWB F14 Blows Code Description 041-360 MD PWB F15 Blows 041-361 MD PWB F16 Blows 041-368 MCU-SW Firmware Mismatch 041-369 MD Type Mismatch 042-320 Drum Y, M, C Motor Fail 042-323 Drum K Motor Fail 042-324 IBT Motor Fail 042-325 Main Motor Fail 042-330 IH Exhaust Fan Fail 042-332 IH Intake Fan Fail 042-335 Process 1 Fan Fail 042-336 Process 2 Fan Fail 042-337 NOHAD Logic Fail 042-338 LVPS Front Fan Fail 042-340 Cartridge Fan Fail 042-341 M Fan Fail 042-342 Suction Fan Fail 042-343 Rear Bottom Fan Fail 042-344 C Exhaust Fan Fail 042-400 Deodorant Filter Life End 042-604 NOHAD Temperature Sensor Fail 042-609 LH Fan Fail 045-310 Image Ready NG 045-311 Controller Communication Fail 045-312 Drive Logic Fail 045-313 ENG_LOGIC_FAIL 045-321 MK_Panel_NG 045-322 MK_Pitch_NG 045-331 MK_MKIF_MSG_Reject 045-332 MK_MMIF_MSG_Reject 045-350 MK_Emergency_Over_Wait 045-351 MK_Emergency_No_Timer 045-352 MK_Emergency_Enforced_Stop 045-370 LPH Power On Fail Multi 045-371 LPH Download Data Fail Multi 045-372 LPH Mismatch Fail Multi 045-373 LPH Read Fail Multi 045-374 LPH Write Fail Multi 045-375 LPH Act Fail Multi 045-376 LPH PLL Lock Fail Multi 047-211 Exit 1 OCT Home Fail 047-212 Exit 2 OCT Home Fail 047-213 Finisher Kind Mismatch 047-216 Finisher Communication Fail 047-217 Feeder Communication Fail 047-320 ALL Destination Tray Broken 061-350 LPH Power On Fail Y 061-351 LPH Power On Fail M 061-352 LPH Power On Fail C Code Description 061-353 LPH Power On Fail K 061-354 LPH Download Data Fail Y 061-355 LPH Download Data Fail M 061-356 LPH Download Data Fail C 061-357 LPH Download Data Fail K 061-358 LPH Mismatch Fail Y 061-359 LPH Mismatch Fail M 061-360 LPH Mismatch Fail C 061-361 LPH Mismatch Fail K 061-362 LPH Read Fail Y 061-363 LPH Read Fail M 061-364 LPH Read Fail C 061-365 LPH Read Fail K 061-366 LPH Write Fail Y 061-367 LPH Write Fail M 061-368 LPH Write Fail C 061-369 LPH Write Fail K 061-370 LPH Act Fail Y 061-371 LPH Act Fail M 061-372 LPH Act Fail C 061-373 LPH Act Fail K 061-374 LPH Chip Fail Y 061-375 LPH Chip Fail M 061-376 LPH Chip Fail C 061-377 LPH Chip Fail K 061-378 LPH Chip Fail Y 061-379 LPH Ltrg Fail M 061-384 LPH Ltrg Fail C 061-385 LPH Ltrg Fail K 061-386 LPH PLL Lock Fail Y 061-387 LPH PLL Lock Fail M 061-388 LPH PLL Lock Fail C 061-389 LPH PLL Lock Fail K 061-390 LPH FFC Connect Posi Fail Y 061-391 LPH FFC Connect Posi Fail M 061-392 LPH FFC Connect Posi Fail C 061-393 LPH FFC Connect Posi Fail K 061-394 LPH FFC Connect Nega Fail Y 061-395 LPH FFC Connect Nega Fail M 061-396 LPH FFC Connect Nega Fail C 061-397 LPH FFC Connect Nega Fail K 061-398 BITZ1 Initialize Fail 061-399 BITZ2 Initialize Fail 061-610 Bitz1 CONTIF Fail 061-611 Bitz2 CONTIF Fail 071-105 Regi Sensor On Jam (Tray1/2/3/4) 071-210 Tray 1 Lift Up Fail 071-212 Tray 1 Paper Size Sensor Broken 071-940 Tray 1 Lift Up NG Code Description 072-101 Tray 2 Miss Feed 072-102 Feed Out Sensor 2 On Jam (Tray 3/4) 072-210 Tray 2 Lift Up Fail 072-212 Tray 2 Paper Size Sensor Broken 072-900 Tray 2 Feed Out Sensor Static Jam 072-940 Tray 2 Lift Up NG 073-101 Tray 3 Miss Feed 073-102 Feed Out Sensor 3 On Jam (Tray 4) 073-210 Tray 3 Lift Up Fail 073-212 Tray 3 Paper Size Sensor Broken 073-900 Tray 3 Feed Out Sensor Static Jam 073-940 Tray 3 Lift Up NG 074-101 Tray 4 Miss Feed 074-210 Tray 4 Lift Up Fail 074-212 Tray 4 Paper Size Sensor Broken 074-900 Tray 4 Feed Out Sensor Static Jam 074-940 Tray 4 Lift Up NG 075-100 MSI Miss Feed 075-103 MSI Feed Out Sensor Off Jam 075-135 Regi Sensor On Jam (MSI) 075-212 MSI Nudger Up Down Fail 077-101 Regi Sensor Off Jam 077-103 Exit Sensor 1 Off Jam 077-104 Exit Sensor 1 Off Jam (Too Short) 077-105 Exit Sensor 2 Off Jam 077-106 Exit Sensor 1 On Jam 077-109 Exit Sensor 2 On Jam 077-110 POB Sensor On Jam 077-130 Regi Sensor On Jam (Duplex Direct) 077-131 Duplex Wait Sensor On Jam 077-211 Tray Module Kind Mismatch 077-212 Tray Module Reset Fail 077-214 Tray Module Logic Fail 077-215 Tray Module Communication Fail 077-300 Front Cover Interlock Open 077-301 L/H Cover Interlock Open 077-305 Tray Module L/H Cover Open 077-307 Duplex Cover Open 077-308 L/H High Cover Open 077-314 P/H Module Logic Fail 077-320 All Feed Tray Broken 077-602 Transparency Sensor Fail 077-900 Regi Sensor Static Jam 077-901 Exit Sensor 1 Static Jam 077-902 Exit Sensor 2 Static Jam 077-903 POB Sensor Static Jam 077-907 Duplex Wait Sensor Static Jam 089-600 RC Sample Lateral Fail-A1 089-601 RC Sample Block Fail-A1-In Code Description 089-603 RC Sample Block Fail-A1-Out 089-604 RC Sample Block Fail-B-#1-In 089-606 RC Sample Block Fail-B-#1-Out 089-607 RC Sample Block Fail-B-#2-In 089-609 RC Sample Block Fail-B-#2-Out 089-610 RC Sample Block Fail-B-#3-In 089-612 RC Sample Block Fail-B-#3-Out 089-613 RC Sample Block Fail-B-#4-In 089-615 RC Sample Block Fail-B-#4-Out 089-616 RC Data Over Flow Fail 089-617 RC Lead Regi Over Range Fail 089-625 RC Data Linearity Fail Y 089-626 RC Data Linearity Fail M 089-627 RC Data Linearity Fail C 089-628 RC Data Linearity Fail K 091-313 CRUM ASIC Communication Fail 091-400 Waste Toner Bottle Near Full 091-401 Drum Cartridge K Near Life 091-402 Drum Cartridge K Life Over 091-407 DRUM K CRUM Trouble Info 091-411 Drum Cartridge Y Near Life 091-417 DRUM Y CRUM Trouble Info 091-421 Drum Cartridge M Near Life 091-427 DRUM M CRUM Trouble Info 091-431 Drum Cartridge C Near Life 091-437 DRUM C CRUM Trouble Info 091-480 Drum Cartridge Y Life Over 091-481 Drum Cartridge M Life Over 091-482 Drum Cartridge C Life Over 091-910 Waste Toner Bottle Not In Position 091-911 Waste Toner Bottle Full 091-913 Drum Cartridge K Life End 091-914 Drum CRUM K Communication Fail 091-915 Drum CRUM K Data Broken 091-916 Drum CRUM K Data Mismatch 091-917 Drum CRUM Y Communication Fail 091-918 Drum CRUM M Communication Fail 091-919 Drum CRUM C Communication Fail 091-921 Drum CRUM K Not In Position 091-927 Drum CRUM Y Not In Position 091-928 Drum CRUM M Not In Position 091-929 Drum CRUM C Not In Position 091-940 Drum CRUM Y Data Broken 091-941 Drum CRUM C Data Broken 091-942 Drum CRUM C Data Broken 091-943 Drum CRUM Y Data Mismatch 091-944 Drum CRUM M Data Mismatch 091-945 Drum CRUM C Data Mismatch 092-312 ATC Fail [Y] Code Description 092-313 ATC Fail [M] 092-314 ATC Fail [C] 092-315 ATC Fail [K] 092-649 ADC Shutter Open Fail 092-650 ADC Shutter Close Fail 092-651 ADC Sensor Fail 092-657 ATC Amplitude Fail [Y] 092-658 ATC Amplitude Fail [M] 092-659 ATC Amplitude Fail [C] 092-660 ATC Amplitude Fail [K] 092-661 Temperature Sensor Fail 092-662 Humidity Sensor Fail 092-665 ATC Average Fail [Y] 092-666 ATC Average Fail [M] 092-667 ATC Average Fail [C] 092-668 ATC Average Fail [K] 092-670 ADC Patch Fail [Y] 092-671 ADC Patch Fail [M] 092-672 ADC Patch Fail [C] 092-673 ADC Patch Fail [K] 092-675 ADC Mini Setup Fail [Y] 092-676 ADC Mini Setup Fail [M] 092-677 ADC Mini Setup Fail [C] 092-678 ADC Mini Setup Fail [K] 093-314 Y Disp Motor Fail 093-315 M Disp Motor Fail 093-316 C Disp Motor Fail 093-317 K Disp Motor Fail 093-324 Deve Y ,M,C Motor Fail 093-400 K Toner Cartridge Near Empty 093-406 K Toner Cartridge Pre Near Empty 093-407 Y Toner Cartridge Pre Near Empty 093-408 M Toner Cartridge Pre Near Empty 093-409 C Toner Cartridge Pre Near Empty 093-423 Y Toner Cartridge Pre Near Empty 093-424 M Toner Cartridge Near Empty 093-425 C Toner Cartridge Near Empty 093-426 TONER K CRUM Trouble Info 093-427 TONER Y CRUM Trouble Info 093-428 TONER M CRUM Trouble Info 093-429 TONER C CRUM Trouble Info 093-912 K Toner Cartridge Empty 093-916 Toner K CRUM Not In Position 093-924 Toner K CRUM Communication Fail 093-925 Toner K CRUM Data Broken Fail 093-926 Toner K CRUM Data Mismatch Fail 093-941 Toner M CRUM Communication Fail 093-942 Toner C CRUM Communication Fail 093-943 Toner Y CRUM Communication Fail Code Description 093-950 Toner Y CRUM Data Broken Fail 093-951 Toner M CRUM Data Broken Fail 093-952 Toner C CRUM Data Broken Fail 093-960 Toner Y CRUM Data Mismatch Fail 093-961 Toner M CRUM Data Mismatch Fail 093-962 Toner C CRUM Data Mismatch Fail 093-970 Toner Y CRUM Not In Position 093-971 Toner M CRUM Not In Position 093-972 Toner C CRUM Not In Position 094-300 IBT Front Cover Open 094-320 1st BTR Contact/Retract Fail 094-323 2nd BTR Contact/Retract Fail 094-417 IBT Unit Near End Warning 094-418 IBT CLN Unit Near End Warning 094-419 2nd BTR Unit Near End Warning 094-420 IBT Unit End Warning 094-421 IBT CLN Unit End Warning 094-422 2nd BTR Unit End Warning OF-01 Common System Fail OF-02 HDD System Fail OF-03 NET/USB System Fail OF-04 Panel System Fail OF-05 IIT System Fail OF-06 IOT System Fail OF-07 FAX System Fail OF-08 116-324 Fail OF-09 Common Job Fail OF-10 HDD Job Fail OF-11 FAX Job Fail OF-12 033-363 Fail OF-13 016-782 / 016-784 Fail OF-14 FAX Card Fail OF-15 NET Job Fail OF-30 [No Error Code] (No problems during service call) OF-31 [No Error Code] (Problem: “Does not start up at power ON” error can be OF-32 [No Error Code] (Problem: “Does not return from Power Save” error can be reproduced.) OF-33 [No Error Code] (Problem: “Remained in ‘Copying…’ or ‘Printing…’” error can be reproduced.) 003-318 IITsc Soft Fail0 003-319 IITsc Video Driver Detection Fail 003-320 IISS-ESS Communication Fail 1 003-321 IISS-ESS Communication Fail 2 003-322 IISS-ESS Communication Fail 3 003-323 IISS-ESS Communication Fail 4 003-324 IISS-ESS Communication Fail 5 003-325 IISS-ESS Communication Fail 6 003-326 IISS-ESS Communication Fail 7 003-327 IISS-ESS Communication Fail 8 003-328 IISS-ESS Communication Fail 9 Code Description 003-329 IISS-ESS Communication Fail 10 003-330 IISS-ESS Communication Fail 11 003-331 IISS-ESS Communication Fail 12 003-332 IISS-ESS Communication Fail 13 003-333 IISS-ESS Communication Fail 14 003-334 IISS-ESS Communication Fail 15 003-335 IISS-ESS Communication Fail 16 003-336 IISS-ESS Communication Fail 17 003-337 IISS-ESS Communication Fail 18 003-338 IISS-ESS Communication Fail 19 003-339 IISS-ESS Communication Fail 20 003-340 IISS-ESS Communication Fail 21 003-341 IISS-ESS Communication Fail 22 003-342 IISS-ESS Communication Fail 23 003-343 IISS-ESS Communication Fail 24 003-344 IISS_ESS X Hotline Fail PowerOn 003-345 X PIO Unmatch Fail 1 003-346 X PIO Unmatch Fail 2 003-700 Returned a lot of Documents error 003-701 Duplication prevention code detect 003-702 Different magnification, for surface and back of a document 003-703 Auto Color Correction Patch Position Fail 003-704 Color Correction Value Difference Fail… 003-705 Paper Size Mismatch of the Energy Saving Return Fail 003-750 Book Duplex-Insufficient Docs 003-751 Under P ANTHER Capacity (Scan) 003-752 Cannot scan 600DPI 003-753 Cannot scan over 300DPI 003-754 S2X recoverable error 003-755 S2X command error 003-756 S2X command error 003-757 Cannot scan over 400DPI 003-760 Scan Settings Error 003-761 Incorrect Paper Tray Size 003-763 Adjustment Chart Not Found 003-764 Document insufficient (image overlay) 003-780 Scan Image Compression Error 003-795 AMS Limit Error 003-930 Cannot scan over 300DPI 003-931 Cannot scan over 400DPI 003-932 Cannot scan 600DPI 003-933 Next Documents Cannot scan over 300DPI 003-934 Next Documents Cannot scan over 400DPI 003-935 Next Documents Cannot scan over 600DPI 003-940 DAM memory insufficient 003-941 Page memory insufficient 003-942 Document size Auto Detect error 003-944 Image repeat count fail 003-946 Every direction difference (Copy APS) Code Description 003-947 Return Documents counts error 003-948 Return Documents mismatch 003-951 1job max page over 003-952 Return Documents Color mismatch 003-955 Documents size exchange error 003-956 Documents size unknown error 003-963 No APS object Tray 003-965 ATS/APS No Paper (IITsc Detect) 003-966 ATS/APS No Destination (IITsc) 003-967 DADF APS No Destination 003-968 Punch position error 003-969 Punch size error 003-970 FAX Line Memory Overflow 003-971 prevention code detect with the right to cancel 003-972 Maximum Stored Page Over Flow 003-973 Every direction difference 003-974 Next Original Specification 003-976 FAX Line Memory Overflow (N up) 003-977 Document Miss Match (Multi Scan) 003-978 Color Document Miss Mutch (Multi Scan) 003-980 Staple position error 003-981 Staple size error 003-982 IIT sc HDD access error 005-500 Write to DADF-ROM error detection (During DLD method) 005-940 DADF No Original 005-941 Doc number of sheets is insufficient 005-942 Doc fault loading on DADF 005-945 Document guide set mistake 005-946 Manuscript reading equipment obstacle detection 005-947 Document guide set mistake 2 005-948 Manuscript reading equipment obstacle detection 007-954 SMH size mismatch 007-959 OHP kind mismatch (Not white frame OHP) 007-960 Paper kind mismatch 007-969 CentreTray full stack 011-941 MBX #01 Bin Full Stack 011-942 MBX #02 Bin Full Stack 011-943 MBX #03 Bin Full Stack 011-944 MBX #04 Bin Full Stack 011-945 MBX #05 Bin Full Stack 011-946 MBX #06 Bin Full Stack 011-947 MBX #07 Bin Full Stack 011-948 MBX #08 Bin Full Stack 011-949 MBX #09 Bin Full Stack 011-950 MBX #10 Bin Full Stack 012-500 Write to Finisher/MACS-ROM error detection (During DLD method) 012-911 Stacker Lower Safety 012-914 Stacker Tray Staple Set Over Count 012-965 Stapler Pin near empty Code Description 012-966 Scratch Sheet Compile 012-969 IOT Center Tray Full 016-210 SW Option Fail (HDD Not Exist) 016-211 SW Option Fail (SysMemory Low) 016-212 SW Option Fail (Page Memory Low) 016-213 SW Option Fail (Printer CARD Not Exist) 016-214 SW Option Fail (Fax CARD Not Exist) 016-215 SW Option Fail (JPEG boad Not Exist) 016-216 SW Option Fail (JPEG boad Not Exist) 016-217 SW Option Fail (Controller ROM not Printer kit) 016-218 PS KIT Not Exist for XDOD 016-219 License is required (Printer Kit) 016-220 S2X unrecoverable error 016-221 S2X 016-222 S2X self-diag error 016-223 S2X SDRAM Error 016-224 S2X PCI Reg Error 016-225 S2X ROM CheckSum Error 016-226 S2X IIT Connection Error 016-227 S2X 016-228 S2X 016-229 SW Option Fail (FCW-UI Not Exist) 016-230 License is required (PS ImageLog Kit) 016-231 SW Option Fail (Image Ext PWB Not Exist) 016-232 MRC HW Initialize Error 016-233 SW Option Fail (USB Host Not Exist) 016-234 XCP Out of Memory Error 016-235 XCP Internal Error 016-236 XCP not active 016-237 Auth plugin not active 016-238 Custom svc not active 016-239 Auth contents not exist 016-240 S2X NVM CheckSum Fail 016-241 S2X NVM CheckSum Fail 016-242 System GMT Clock Fail 016-310 ssmm Job Log Full 016-311 No Scanner that Should Be 016-312 SW Option Fail (Hybrid WaterMark Not Exist) 016-313 Hybrid WaterMark setting mismatch 016-314 SW Option Fail (Hybrid WaterMark Not Exist) 016-315 IIT Interface Fail 016-316 Page Memory Not Detected 016-317 Page Memory Broken- Standard 016-318 Page Memory Broken- Option 016-319 Long Boot Diag IIT Interface Fail 016-320 Document Formatter Fatal Error 016-321 Fax Module Error 016-322 JBA Account Full 016-323 B-Formatter Fatal Error Code Description 016-324 Scheduled Image Overwrite 016-325 Using Personal Certificate 016-326 Cont-UI Cable Connection Fail 016-327 BackPlane Connection Fail 016-328 Cont-MCU Cable Connection Fail 016-329 Long Boot Diag Page Memory Not Detected Fail 016-330 Cont System Memory Fail-1 016-331 Cont System Memory Fail-2 016-332 Cont System Memory Fail-3 016-333 Long Boot Diag Page Memory Broken Standard Fail 016-334 Long Boot Diag Page Memory Broken Option Fail 016-335 Cont ProgramROM Fail-1 016-336 Cont ProgramROM Fail-2 016-337 Cont ProgramROM Fail-3 016-338 Cont FontROM Fail-1 016-339 Cont FontROM Fail-2 016-340 Cont FontROM Fail-3 016-341 Cont FontROM Fail-4 016-342 Cont RTC Fai 016-343 Long Boot Diag Timer Fail 016-345 Cont NV-Memory Fail 016-346 Cont A4FAX Modem Diagnosis Fail 016-347 Cont PageMemory Fail 016-348 Cont PageMemory Fail-2 016-349 Cont MAC Address Data Fail 016-350 Cont SEEP-ROM Fail-1 016-351 Cont SEEP-ROM Fail-2 016-360 Cont UI Fail-1 016-362 Cont UI Fail-2 016-363 Cont LyraCard Fail 016-364 Cont USB20 Host Fail 016-365 Cont USB20 Device Fail 016-366 Cont HDD Fail-1 016-367 Cont HDD Fail-2 016-368 Cont Torino Fail 016-369 Cont S2X PWB Fail 016-370 Cont Fail 016-371 Cont USB11 Host Fail 016-372 Cont HDD FileSystem Fail-A 016-373 Cont HDD FileSystem Fail-B 016-374 Cont HDD FileSystem Fail-C 016-375 Cont HDD FileSystem Fail-D 016-376 Cont HDD FileSystem Fail-E 016-377 Cont HDD FileSystem Fail-F 016-378 Cont HDD FileSystem Fail-G 016-379 Cont HDD FileSystem Fail-H 016-380 Cont HDD FileSystem Fail-I 016-381 Cont HDD FileSystem Fail-I 016-382 Cont HDD FileSystem Fail-P Code Description 016-400 8021x authentication failure 016-401 8021x EAP type not supported 016-402 8021x authentication failure by timing out 016-403 8021x certificate failure 016-404 8021x inside failure 016-405 Certificate DB File error 016-406 8021x client certificate failure 016-407 XCP Plugin Secrity Exception 016-408 XCP Invalid Plugin 016-409 XCP Plugin Version Incompatible 016-410 XCP_PLUGIN_PROPERTY_INVALID 016-411 XCP_UNSUPPORTED_CLASS_VERSION 016-412 XCP Plugin Misc Error 016-413 Couldnt detect proxy server automatically 016-414 Couldnt connect to Xerox server or proxy 016-415 Connection to Xerox server has timed out 016-416 An invalid state message received from server 016-417 Invalid network settings were found 016-450 SMB Host name duplicated 016-453 Dynamic DNS – IPv6 NG 016-454 DNS renewal failure of dynamic … 016-455 SNTP server time out 016-456 SNTP time asynchronous 016-461 Under non-transmitted image log stagnation 016-500 Write to Cont-ROM error detection (During DLD method) 016-501 Write to S2X-ROM error detection (During DLD method) 016-502 Write to Cont/S2X/IISS/DADF/IOT/Fin/FaxCard error detection (During PJL method) 016-503 SMTP Server Fail for Redirector 016-504 POP Server Fail for Redirector 016-505 POP Authentication Fail for Redirector 016-506 Image Log HDD Full 016-507 ImageLog Send Fail01 016-508 ImageLog Send Fail02 016-509 ImageLog No Send Rule01 016-510 ImageLog No Send Rule02 016-511 ImageLog Invalid Send Rule01 016-512 ImageLog Invalid Send Rule02 016-513 SMTP server reception error 016-514 XPS Error 016-515 XPS Short of Memory 016-516 XPS PrintTicket description error 016-517 PS Booklet Illegal Color Mode Change 016-518 PS Booklet Conflict WM 016-519 Device DV – Reached Limit 016-520 MRC HW Job Error 016-521 SmartCard Not Found 016-522 LDAP SSL error 112 016-523 LDAP SSL error 113 016-524 LDAP SSL error 114 Code Description 016-525 LDAP SSL error 115 016-526 LDAP SSL error 116 016-527 LDAP SSL error 117 016-528 SmartCard Not Auth 016-529 Remote Download server timeout 016-533 Kerberos Attestation protocol error 37 016-534 Kerberos Attestation protocol error 41,42 016-535 Remote Download file access error 016-536 Host name solution error in Remote Download 016-537 Remote Download server connection error 016-538 Remote Download file write error 016-539 Kerberos Attestation protocol error other 016-543 Attestation Agent error 543 016-545 Attestation Agent error 545 016-546 Attestation Agent error 546 016-548 Attestation Agent error 548 016-553 Attestation Agent error 553 016-554 Attestation Agent error 554 016-555 Attestation Agent error 555 016-556 Attestation Agent error 556 016-557 Attestation Agent error 557 016-558 Attestation Agent error 558 016-559 Remote Download parameter error 016-560 Attestation Agent error 560 016-562 ADetected user duplication, in a cert agent 016-563 ImageLog Memory Full (Exp Kit 016-564 Remote Download Server Authentication Failed 016-565 Backup Restore Error 016-566 Backup Restore Condition Error 016-567 Backup Capacity Full 016-568 Backup Restore Failed 016-569 Attestation Agent error 569 016-570 Job ticket out of memory 016-571 Job ticket wrong param 016-572 Job ticket media error 016-573 Job ticket parse error 016-574 Host name solution error in FTP 016-575 DNS server un-sets up in FTP 016-576 Server connection error in FTP 016-577 Problem in FTP service 016-578 Login name or a password error in FTP 016-579 Scanning picture preservation place error in FTP 016-580 File name acquisition failure from FTP server 016-581 File name suffix limit over in FTP 016-582 File creation failure in FTP 016-583 Lock folder creation failure in FTP 016-584 Folder creation failure in FTP 016-585 File delete failure in FTP 016-586 Lock folder delete failure in FTP Code Description 016-587 Folder delete failure in FTP 016-588 Data write-in failure to FTP server 016-589 Data read failure from FTP server 016-590 Data reading failure from FTP server 016-591 FTP scan filing policy injustice 016-592 NEXTNAMEDAT file access error in FTP 016-593 Internal error in FTP Scan 016-594 TYPE command failure in FTP 016-595 PORT command failure in FTP 016-596 CDUP command failure in FTP 016-597 Same name file exists in FTP servcer 016-598 Email message size over 016-599 Email message size over 016-600 KO Authentication Locked 016-601 Illegal Access Detection 016-603 HDD not found Fail 016-700 Password is under minimum figures 016-701 Out of ART EX Memory 016-702 Out of Page Buffer 016-703 Email To Invalid Box 016-704 Mailbox is Full 016-705 Secure Print Fail 016-706 Max User Number Exceeded 016-707 Sample Print Fail 016-708 HD Full by Annotation/Watermark image 016-709 ART EX Command Error 016-710 Delayed Print Fail 016-711 Email transmission size limit over 016-712 Under PANTHER Capacity (I-Formtter) 016-713 Security Box Password Error 016-714 Security Box is not Enable 016-715 ESCP Form Invalid Password 016-716 TIFF Data Overflow 016-717 Fax/Internet FAX Send Result Not Found 016-718 Out of PCL6 Memory 016-719 Out of PCL Memory 016-720 PCL Command Error 016-721 Other Error 016-722 Job cancel by staple position NG 016-723 Job cancel by punch position NG 016-724 Complex Position Error of Staple and Punch 016-725 B-Formatter Library Image Conversion Error 016-726 PDL Auto Switch Fail 016-727 0-page document is unstorable in a MailBox 016-728 Unsupported TIFF Data 016-729 TIFF Data Size too Big 016-730 Unsupported ART Command 016-731 Invalid TIFF Data 016-732 Form not registerd Code Description 016-733 Destination address resolution error 016-734 Simple transmittion report invocation error 016-735 Updating Job Templete 016-736 Remote directory lock error 016-737 Remote lock directory remove error 016-738 PS Booklet Illegal OutPut Size 016-739 PS Booklet Document Output Missmatch 016-740 PS Booklet OutPut Tray Missmatch 016-741 Download Mode NGJob Fail 016-742 Download Data Product ID Mismatch 016-743 Device Model/Panel Type Error 016-744 Download Data CheckSum Error 016-745 Download Data XPJL Fatal Error 016-746 Unsupported PDF File 016-747 No memory for drawing annotation 016-748 HD Full 016-749 JCL Syntax Error 016-750 Print job ticket description error 016-751 PDF Error 016-752 PDF Short of Memory 016-753 PDF Password Mismatched 016-754 PDF LZW Not Installed 016-755 PDF Print Prohibited 016-756 Auditron – Prohibit Service 016-757 Auditron – Invalid User 016-758 Auditron – Disabled Function 016-759 Auditron – Reached Limit 016-760 PS Decompose failure 016-761 FIFO EMPTY 016-762 Print LANG Not Installed 016-763 POP server is not found 016-764 SMTP Server Connect Error 016-765 SMTP Server HD Full 016-766 SMTP Server File System Error 016-767 Invalid E-mail Address 016-768 Invalid Sender Address 016-769 SMTP Server Unsupported DSN 016-770 The direct fax function is canceled by NVM 016-771 Scan Data Repository ERR (DNS address) 016-772 Scan Data Repository ERR (DNS Library) 016-773 Invalid IP Address 016-774 HD Full – Compression Convert 016-775 HD Full – Image Convert 016-776 Image Convert ERR 016-777 HD Access ERR-Image Convert 016-778 HD Full – Scan Image Convert 016-779 Scan Image Conversion Error 016-780 HD Access ERR-Image Convert 016-781 Server Connect ERR Code Description 016-782 Server Login ERR 016-783 Invalid Server Path 016-784 Server Write ERR 016-785 Server HD Full 016-786 HD Full-Scan Write ERR 016-787 Invalid Server IP ADD 016-788 Retrieve to Browser Failed 016-789 HD Full – Job Memory 016-790 Email fragment over 016-791 File Retrieve Fail 016-792 Specified Job Not Found 016-793 MF I/O HD Full 016-794 MediaReader:Media No Insert 016-795 MediaReader:Format Error 016-796 Document insert operation error 016-797 MediaReader:Image File Read Error 016-798 No TrustMarking Option 016-799 PLW Print Instruction Fail 016-910 Required Resource Not Ready (IOTsc detect) 016-911 Multi-Paper Required On A Single Tray 016-940 Duplex Mix Size NG 016-941 Booklet Duplex Mix Size NG 016-942 Page Delete Duplex Mix Size NG 016-943 Insert doc Duplex Mix Size NG 016-944 Document merge NG 016-945 Insert doc Duplex print NG 016-946 Insert doc NG 016-947 APS No Destination Error 016-948 Small Book action NG 016-949 Insert Mix doc NG 016-981 HDD access error 016-982 HDD access error 2 016-983 Image Log HDD Full 016-985 Data size over flow (Scan to Email) 017-700 ThinPrint Connection Timeout Fail 017-701 017-701 ThinPrint Connection Fail 017-702 017-702 ThinPrint Invalid Data Fail 017-703 017-703 ThinPrint Over Maximum Data Size Fail 017-704 017-704 ThinPrint Internal Fail 017-705 017-705 ThinPrint SSL Authentication Invalid Certification Fail 017-706 017-706 ThinPrint SSL Authentication Before Expiration Fail 017-707 017-707 ThinPrint SSL Authentication Expired Fail 017-708 017-708 ThinPrint SSL Authentication Misrepresentation Fail 017-709 017-709 ThinPrint SSL Fail 017-710 017-710 SIP Mismatched Media Type Fail 017-711 017-711 SIP Redirect Response Fail 017-712 017-712 SIP Session Timeout Fail 017-713 017-713 Start TLS Unsupported Fail 017-714 017-714 SMTP Over SSL Fail Code Description 017-715 017-715 SSL Cert Untrusted Fail 017-716 017-716 SSL Cert Date Invalid Fail 017-717 017-717 SSL Server Cert Expired Fail 017-718 017-718 SSL Server Cert Invalid Fail 017-719 017-719 SMTP Over SSL Internal Fail 017-720 017-720 Contract Type Fail 017-721 017-721 Geographic Region Fail 017-722 017-722 Total Impressions Over Fail 017-723 017-723 DocuWorks Unsupported character Fail 018-400 IPSEC Error (Configuration Mismatch) 018-401 Incosistent SIP configuration 018-402 SIP server communication fail 018-403 SIP registraion fail (authentication) 018-404 SIP registration fail(other) 018-405 UserAccount Disable 018-500 CA Message Receiver Boot Error(S_cert lost) 018-501 CA Server Connection Error 018-502 Login failure in SMB 018-503 CA Message Receiver Timeout 018-504 CA SessionID Mismatch 018-505 SMB-DOS protocol error 1-005 018-506 CA FieldID Mismatch 018-507 CA Credential Error 018-508 CA Server Fatal Error 018-509 Template parameter conflict 018-510 Host name solution error in BMLinkS 018-511 DNS server un-sets up in BMLinkS 018-512 Service Connect error in BMLinkS 018-513 BMLinkS Service Not Found 018-514 bmlinks access-right-violation 018-515 bmlinks storage-access-error 018-516 bmlinks unsupported-attribute 018-517 bmlinks storage-full 018-518 bmlinks operation-not-available 018-519 bmlinks unknown-error 018-520 Internal error in BMLinkS Scan 018-521 request send failure in BMLinkS 018-522 response receive failure in BMLinkS 018-523 image send failure in BMLinkS 018-524 Invalid device network setting 018-525 HDD full or HDD access error 018-526 Rejected to be refresh 018-527 JT Monitor Internal error 018-528 Soap request error 018-529 Duplicate scan request 018-530 Authentication error 018-531 Failed to create a new job 018-532 Too many jobs to create a new 018-543 Shared name error in SMB server Code Description 018-547 The number restriction over of SMB scan users 018-556 HTTP server script error 018-557 HTTP Invalid char in filename 018-558 HTTP file not found 018-559 HTTP File duplication fail 018-560 HTTP server login fail 018-561 HTTP server not found 018-562 HTTP client error 018-563 HTTP server error 018-564 Host name solution error in HTTP 018-565 Proxy name solution error in HTTP 018-566 Server Connect error in HTTP 018-567 HTTP server access fail 018-568 HTTP server SSL access fail 018-569 HTTP server certificate fail 018-570 HTTP certificate fail 018-571 Internal error in Scan 018-572 Invalid char in context 018-573 Invalid char in server 018-574 Invalid char in volume 018-575 Invalid char in login 018-576 Invalid char in path 018-577 Invalid char in file 018-578 Nw server not found 018-579 Nw server disk full 018-580 Netware invalid volume 018-581 Netware invalid path 018-582 Access right fail 018-583 Nw server disk error 018-584 Nw server access fail 018-585 Netware error in use 018-586 Netware login fail 018-587 File duplication fail 018-588 Scan filing policy invalid 018-589 NEXTNAMEDAT error 018-590 Same name exists 018-591 File name suffix limit over 018-592 lock folder create fail 018-593 lock folder delete fail 018-595 Detected user duplication, in LDAP 018-596 LDAP protocol error 596 018-700 Network Stack is not Initialized Fail 018-701 LDAP protocol error 01 018-702 LDAP protocol error 02 018-703 LDAP protocol error 03 018-704 LDAP protocol error 04 018-705 LDAP protocol error 05 018-706 LDAP protocol error 06 018-707 LDAP protocol error 07 Code Description 018-708 LDAP protocol error 08 018-709 Active Communication is Unavailable Now Fail 018-710 LDAP protocol error 10 018-711 LDAP protocol error 11 018-712 LDAP protocol error 12 018-713 LDAP protocol error 13 018-714 LDAP protocol error 14 018-716 LDAP protocol error 16 018-717 LDAP protocol error 17 018-718 LDAP protocol error18 018-719 LDAP protocol error 19 018-720 LDAP protocol error 20 018-721 LDAP protocol error 21 018-725 Kerberos Attestation protocol error 22 018-726 Kerberos Attestation protocol error 70 018-727 Kerberos Attestation protocol error 71 018-728 Kerberos Attestation protocol error 72 018-732 LDAP protocol error 32 018-733 LDAP protocol error 33 018-734 LDAP protocol error 34 018-735 LDAP protocol error 35 018-736 LDAP protocol error 36 018-748 LDAP protocol error 48 018-749 LDAP protocol error 49 018-750 LDAP protocol error 50 018-751 LDAP protocol error 51 018-752 LDAP protocol error 52 018-753 LDAP protocol error 53 018-754 LDAP protocol error 54 018-764 LDAP protocol error 64 018-765 LDAP protocol error 65 018-766 LDAP protocol error 66 018-767 LDAP protocol error 67 018-768 LDAP protocol error 68 018-769 LDAP protocol error 69 018-770 LDAP protocol error 70 018-771 LDAP protocol error 71 018-780 LDAP protocol error 80 018-781 LDAP protocol error 81 018-782 LDAP protocol error 82 018-783 LDAP protocol error 83 018-784 LDAP protocol error 84 018-785 LDAP protocol error 85 018-786 LDAP protocol error 86 018-787 LDAP protocol error 87 018-788 LDAP protocol error 88 018-789 LDAP protocol error 89 018-790 LDAP protocol error 90 018-791 LDAP protocol error 91 Code Description 018-792 LDAP protocol error 92 018-793 LDAP protocol error 93 018-794 LDAP protocol error 94 018-795 LDAP protocol error 95 018-796 LDAP protocol error 96 018-797 LDAP protocol error 97 021-210 USB IC Card Reader connection error 021-211 USB IC Card Reader broken 021-212 USB IC Card Reader preparing error 021-213 Controller Price Table Error 021-214 USB IC Card Reader encryption setting error 021-215 Invalid Accessory Kind Setting 021-360 EP Accessory Fail 021-361 EP Accessory Kind Config Error 021-400 Check Request 021-401 USB IC Card Reader connection error info 021-500 EPAccessoryJobExclusion 021-501 Invalid URL has detected 021-502 Couldn’t resolve proxy name 021-503 Couldn’t resolve host name 021-504 Couldn’t connect to host/proxy 021-505 Couldn’t establish SSL session 021-506 An invalid peer certificate has received 021-507 Proxy unauthorized access 021-508 A connection to host/proxy has timed out 021-509 SOAP Fault: An invalid message detected 021-510 SOAP Fault: The MC already unregistered 021-511 SOAP Fault: The MC already registered (WEP) 021-512 SOAP Fault: The MC already registered (EP-SV) 021-513 SOAP Fault: The MC already registered (EP-DX) 021-514 SOAP Fault: The MC already registered (EP-TRESS) 021-515 SOAP Fault: An invalid product code detected 021-516 SOAP Fault: An invalid serial number detected 021-517 SOAP Fault: The service not responded 021-518 SOAP Fault: An internal error occurred on server 021-519 SOAP Fault: Service is temporarily unavailable 021-520 Couldn’t connect to CA 021-521 A connection to CA has timed out 021-522 A miscellaneous CA comm error has detected 021-523 An internal error has occurred 021-524 A registeration conflict has detected 021-525 An unregistration conflict has detected 021-526 A miscellaneous http session error has detected 021-527 An invalid message has received 021-528 A communication settings was set as disabled 021-529 Device has already latest firmware 021-530 An internal error has occurred on update server 021-531 Service is temporarily unavailable on update svr 021-532 Found an unsupported ROM set Code Description 021-533 Software Update unoperational by user 021-534 Found an unsupported submodule 021-535 Found an unsupported peripheral 021-700 Accessory Failure 021-701 Accessory Preparing 021-731 EP Accessory – Function Disabled 021-732 EP Accessory Error732 021-733 EP Accessory Error733 021-750 U Parts Request Fail (EP-SV) 021-751 Maintenance Request Fail (EP-SV) 021-770 U Parts Request Fail (EP-DX) 021-771 Maintenance Request Fail (EP-DX) 021-772 EPDX Install, Remove Error 021-941 EP – Scan Service Paused By Disable 021-942 EP – Scan Service Paused By Color Mode 021-943 EP – Print Service Paused By Disable 021-944 EP – Print Service Paused By Color Mode 021-945 EP – Service Paused By Disable 021-946 EP – Service Paused By Color Mode 021-947 Subtractive Accessory Disable (Scan) 021-948 Subtractive Accessory Disable (Print) 021-949 Subtractive Accessory Disable 023-600 Held Down Key Error(UI-Panel) 023-601 Held Down Softkey Error(UI-Panel) 024-340 IOT-ESS Communication Fail 1 024-341 IOT-ESS Communication Fail 2 024-342 IOT-ESS Communication Fail 3 024-343 IOT-ESS Communication Fail 4 024-345 IOT-ESS Communication Fail 5 024-346 IOT-ESS Communication Fail 6 024-347 IOT-ESS Communication Fail 7 024-348 IOT-ESS Communication Fail 8 024-349 IOT-ESS Communication Fail 9 024-350 IOT-ESS Communication Fail 10 024-351 IOT-ESS Communication Fail 11 024-352 IOT-ESS Communication Fail 12 024-353 IOT-ESS Communication Fail 13 024-354 IOT-ESS Communication Fail 14 024-355 IOT-ESS Communication Fail 15 024-356 IOT-ESS Communication Fail 16 024-357 IOT-ESS Communication Fail 17 024-358 IOT-ESS Communication Fail 18 024-359 IOT-ESS Communication Fail 19 024-360 IOT-ESS Initialization Fail 024-361 Invalid IOT PaperSizeGroup Info 024-362 Page Sync Illegal Start 024-363 Page Sync Illegal Stop 024-364 DMA Transfer Fail 024-365 Overflow on Loop Back Write Code Description 024-366 JBIG Library Other Fail 024-367 Decompress Other Fail 024-368 PCI Error 024-370 Marker Code Detection Fail 024-371 IOT-ESSCommunication Fail 21 024-372 IOT-ESSCommunication Fail 22 024-373 IOT-ESSCommunication Fail 23 024-374 Regi Con PLL Parameter Fail 024-375 IOT-ESSCommunication Fail 24 024-376 IOT-ESS Communication Fail 25 024-600 Billing Master Counter repair 024-601 Billing Backup Counter 1 repair 024-602 Billing Backup Counter 2 repair 024-603 SWKey Master Counter repair 024-604 SWKey Backup Counter 1 repair 024-605 SWKey Backup Counter 2 repair 024-606 Billing Meter Type Master Counter repaire 024-607 Billing Meter Type Backup Counter 1 repaire 024-608 Billing Meter Type Backup Counter 2 repaire 024-609 Billing CountType Master Counter repaire 024-610 Billing CountType Backup Counter 1 repaire 024-611 Billing CountType Backup Counter 2 repaire 024-612 Modal Break Point Master Counter repaire 024-613 Modal Break Point Backup Counter 1 repaire 024-614 Modal Break Point Backup Counter 2 repaire 024-700 Shortage memory capacity, or no Hard Disk 024-701 Invalid instruction of face inversion 024-702 Paper Jam 024-703 Booklet Sheets Count Over While Printing Fail 024-742 Print Booklet sheets counts over 024-746 Print Request Failure-Paper 024-747 Print Instruction Fail 024-748 Bates Numbering Digit Over 024-775 Print Booklet sheets counts over(Not field attachment) 024-900 Upper Tray Out Of Place 024-910 Tray1 size mismatch 024-911 Tray2 size mismatch 024-912 Tray3 size mismatch 024-913 Tray4 size mismatch 024-914 Tray6 size mismatch 024-915 Tray7 size mismatch 024-916 Mix Full Stack 024-917 Stacker Tray Staple Set Over Count 024-919 FaceUP Tray Close 024-920 Face Down Tray1 Paper FULL 024-922 Face Down Tray2 Paper FULL 024-923 Operation Y Toner Empty 024-924 Operation M Toner Empty 024-925 Operation C Toner Empty Code Description 024-926 Punch DustBox Miss Set 024-927 OCT Full Stack 024-928 Scratch Sheet Compile (A-Fin) 024-929 Center Tray Full Stack 024-930 Stacker Tray Full (LargeSize Full) 024-931 Staple Dust Full 024-932 Staple Box Set Fail 024-933 Operation Y Drum End of Life 024-934 Paper kind mismatch 024-936 Tray 2 paper mismatch 024-937 Tray 3 paper mismatch 024-938 OHP kind mismatch at Tray4 (Not white frame OHP) 024-939 OHP kind mismatch (Not white frame OHP) 024-940 Folder Tray Out Of Place 024-941 Folder Tray Full Stack 024-942 Booklet sheets counts over 024-943 Booklet Low Staple 024-945 Booklet Full Stack 024-946 Tray 1 Out Of Place 024-947 Tray 2 Out Of Place 024-948 Tray 3 Out Of Place 024-949 Tray 4 Out Of Place 024-950 Tray 1 Empty 024-951 Tray 2 Empty 024-952 Tray 3 Empty 024-953 Tray 4 Empty 024-954 Tray SMH Empty 024-955 Tray 6 Empty 024-956 Tray 7 Empty 024-957 Interposer Empty 024-958 SMH size mismatch 024-959 Tray1 size mismatch 024-960 Tray2 size mismatch 024-961 Tray3 size mismatch 024-962 Tray4 size mismatch 024-963 Finisher Punch DustBox FULL 024-965 ATS/APS No Paper (IOTsc detect) 024-966 ATS/APS No Destination Error 024-967 Different width Mix Paper detect (Stapler job) 024-968 Stapler/Punch Batting 024-969 Different width Mix Punch 024-970 Tray 6 Out Of Place 024-971 Tray 7 Out Of Place 024-972 Tray6 size mismatch 024-973 Tray7 size mismatch 024-974 Interposer Tray Size Mismatch 024-975 Copy Booklet sheets counts over 024-976 Finisher Staple Status NG 024-977 Stapler Feed Ready Fail Code Description 024-978 Booklet Stapler NG 024-979 Stapler Near Empty 024-980 Finisher Stacker Tray Full 024-981 Finisher TopTray Full 024-982 Stacker Lower Safety warning 024-983 Booklet Tray Full 024-984 Booklet Low Staple F 024-985 SMH Stop check 024-987 Envelop Folder Tray Full 024-988 Envelop Folder Tray Set Fail 024-989 Booklet Low Staple R 024-990 Punch Dust Full 025-596 Diag HDD Mentenance Fail 025-597 Diag HDD Initialize Fail 026-400 Exceed the number of connection of USB Host Fail 026-700 LDAP protocol MAX error 026-701 Adress Book request overflow 026-702 Adress Book directory service overflow 026-703 Abort with Logout 026-704 DocuWorks Error 026-705 DocuWorks Short of Memory 026-706 DocuWorks Print Prohibited 026-707 DocuWorks Unlock Failed 026-708 URL data size over 026-709 URL hdd full 026-710 S/MIME unsupported cipher decrypt fail 026-711 Multi-page file size over 026-712 HTTP out job overlap error 026-713 Couldnt detect proxy server automatically 026-714 Couldnt connect to Xerox server or proxy 026-715 Connection to Xerox server has timed out 026-716 An invalid state message received from server 026-717 Invalid network settings were found 026-718 PS Print Instruction Fail 026-719 Internal error in Scan 026-720 Media full 026-721 Media access fail 026-722 Media format fail 026-723 Media access fail 026-724 Remote Download file size error 026-725 Remote Download file checksum error 026-726 Options inconsistent 026-727 Media filepath fail 026-728 WSD Scan Network Access Fail 026-729 WSD Scan Data Transfer Fail 026-730 Can’t Detect Paper Size Of Specified Tray 026-731 PJL PIN Number Fail 026-732 PJL Printcount Range Over Fail 026-733 PJL Password Fail Code Description 026-734 Can not change to the PJLDIAG MODE 026-735 Authentication Makes Waiting Print Jobs Deleted 027-400 Net Off Line 027-442 Duplicat IP address 027-443 DNS renewal failure of dynamic 027-444 Duplicat IP address 027-445 Illegal IP address 027-446 Duplicat IP address 027-447 Duplicat IP address 027-452 Duplicat IP address 027-500 SMTP Server Fail for Mail IO 027-501 POP Server Fail for Mail IO 027-502 POP Authentication Fail for Mail IO 027-503 POP server communication timeout 027-504 Response reception is not expected from server 027-513 SMB Scan client has no right to access 027-514 Host name solution error in SMB 027-515 DNS server un-sets up in SMB 027-516 Server connection error in SMB 027-518 Login name or a password error in SMB 027-519 Scanning picture preservation place error in SMB 027-520 File name acquisition failure from SMB server 027-521 File name suffix limit over in SMB 027-522 File creation failure in SMB 027-523 Lock folder creation failure in SMB 027-524 Folder creation failure in SMB 027-525 File delete failure in SMB 027-526 Lock folder delete failure in SMB 027-527 Folder delete failure in SMB 027-528 Data write-in failure to SMB server 027-529 Data read failure from SMB server 027-530 File name duplicate failure in SMB 027-531 SMB scan filing policy injustice 027-532 NEXTNAMEDAT file access error in SMB 027-533 Internal error in SMB Scan 027-543 SMB server name specification error 027-547 SMB Protocol error 4-007 027-548 SMB Protocol error 4-008 027-549 SMB Protocol error 4-009 027-564 SMB Protocol error 4-024 027-565 SMB Protocol error 4-025 027-566 SMB Protocol error 4-026 027-569 SMB (TCP/IP)is not started 027-572 SMB Protocol error 4-032 027-573 SMB Protocol error 4-033 027-574 SMB Protocol error 4-034 027-576 SMB Protocol error 4-036 027-578 SMB Protocol error 4-038 027-584 SMB Protocol error 4-044 Code Description 027-585 SMB Protocol error 4-045 027-586 SMB Protocol error 4-046 027-587 SMB Protocol error 4-047 027-588 SMB Protocol error 4-048 027-589 SMB Protocol error 4-049 027-590 SMB Protocol error 4-050 027-591 SMB Protocol error 4-051 027-599 SMB Protocol error 4-other 027-600 ExtPrint Check Mode Error 027-700 Mail address domain err 027-701 Disconnect network cable 027-702 Certificate for addresses, was not found 027-703 Certificate for addresses, was expired 027-704 Certificate for addresses, was untrusted 027-705 Certificate for addresses, was revoked 027-706 Certificate not found 027-707 Certificate expired 027-708 Certificate untrusted 027-709 Certificate revoked 027-710 S/MIME mail was disabled 027-711 S/MIME mail sender certificate not found 027-712 S/MIME mail sender certificate not valid 027-713 S/MIME mail was altered 027-714 S/MIME mail sender impersonation 027-715 S/MIME mail certficate not support 027-716 No-Signed mail receipt was rejected 027-717 No MX Record at the DNS 027-720 Ext Srv Host Not Found 027-721 Ext Srv Not Found 027-722 Ext Srv Timeout Fail 027-723 Ext Srv Authentication Fail 027-724 Ext Srv Access Fail 027-725 Ext Srv Operation Fail 027-726 Ext Srv Unknown State 027-727 Ext Srv Req Invalid Params 027-728 Ext Srv Req File Exceed 027-730 SMTP mail division error 027-731 Server Limit Err 027-732 Server Access Err 027-733 Server SSL Err 027-734 Server Certificate Err 027-735 Device SSL Config Err 027-736 Device Certificate Err 027-737 Template Server Read ERR 027-739 Invalid Template Server Path 027-740 Template Server Login ERR 027-741 Template Server Connect Fail 027-742 HD File System Full 027-743 Template Server Install ERR Code Description 027-744 Template Server ADD ERR (DNS Library) 027-745 Template Server ADD ERR (DNS address) 027-746 JobTemplate Pool Server Not Ready 027-750 Fax document incongruent 027-751 Job Template analysis error 027-752 Must user un inputting 027-753 Job flow service request disabled 027-754 Job flow service File signature setting mismatch 027-760 XJT Command Fail 027-761 Web Print time out 027-762 Illegal Web Print job ticket 027-763 Auditron – Cannot Verify User 027-770 PDL Error 027-771 DFE Disk Full 027-772 SMTP server error (HELO Command refusal) 027-773 SMTP server communication timeout 027-774 SMTP address inaccurate character 027-775 Too many SMTP address 027-776 SMTP server error (EHLO Command refusal) 027-777 SMTP server un-supports SMTP-AUTH 027-778 There is no mode specified by SMTP-AUTH 027-779 It attestation-fails by SMTP-AUTH 027-796 Email Not Printed 027-797 Invalid Output Destination 027-910 Manual duplex operation(Back Print from Tray7) 027-911 Manual duplex(Back Print from Tray6) 027-912 Manual duplex(Back Print from Tray5) 027-913 Manual duplex(Back Recovery – Front Print) 027-914 Manual duplex(Back Recovery – Front Print) 027-915 Manual duplex(Back Recovery – Front Print) 027-916 Manual duplex(Back Recovery – Back Print) 027-917 Manual duplex(Back Recovery – Back Print) 027-918 Manual duplex(Back Recovery – Back Print) 028-910 Wrong Fusing Unit Type Fail 028-911 Wrong Fusing Unit Mode Fail 028-912 Fusing Unit Lever Envelope Fail 033-310 Fax Charge Function Fail By Multi Channel 033-311 Invalid Addressbook Data are Registered 033-312 Controller not respond when system is changing mode 033-313 USB disconnected 033-314 Controller ROM Fax Card ROM mismatch 033-315 USB Fatal Error 033-316 FAX Device Cont Error 033-317 FAX Device Error 033-318 Image Processing Error 033-319 Fax Control task detects error 033-320 Controller not respond when system is Booting 033-321 Fax Card not respond when system is Booting 033-322 FAX Card I/F timeout Code Description 033-323 FAX Card Mini I/F timeout 033-324 USB state change Error 033-325 FCM Fatal Error 033-326 Mini Manager Fatal Error 033-327 FCM no response to stop request 033-328 Failed to initialize fax log 033-329 Detected fax process failuer 033-330 FoIP Unrecoverable Error 033-331 FoIP Controller Init Fail 033-332 FoIP Cont not respond when system is Booting 033-333 FoIP Cont not respond when system is sleeping 033-334 Can not send a message to FoIP CONT 033-335 Illegal fault code notice 033-336 Access to a non-mounted channel 033-337 FaxCard mismatch 033-338 Illegal type of FaxBox 033-339 faxc2 not respond when system is sleeping 033-363 Fax Card Reset (Reboot) 033-500 No CS after RS Req 033-501 No Appropriate PIX Data 033-502 Post-message resend exceeded 033-503 T1 Timeout 033-504 T2 Timeout 033-505 T5 Timeout 033-506 DCN Receive 033-507 Unable to receive by remote 033-508 Destination Polling Error 033-509 DCS/NSS Resend Exceeded 033-510 Fallback Error 033-511 No response after 3rd DTC/NSC 033-512 Remote has no Relay 033-513 Remote has no Mailbox 033-514 Carrier Down Detected 033-516 EOR Receive 033-517 ECM Phase C Flag Timeout 033-518 Remote cannot receive SUB 033-519 PTX has no SEP capability 033-520 Remote cannot receive passward 033-521 Transmission Canceled via DTMF 033-522 DTMF I/F Timeout 033-523 Line 1 not connected 033-524 Line 2 not connected 033-525 Line 3 not connected 033-526 ECM Error 033-527 EOR Send 033-528 RTN Send 033-529 RTN Receive 033-530 DTMF Illegal Procedure Error 033-531 DTMF Procedure Error Code Description 033-532 Illegal Command Received 033-533 T30 Protocol Error 033-534 Unsupported Function at Remote 033-535 DCN Receive at Phase B Send 033-536 Ring Stopped before Fax Device Release 033-537 In and out call conflict 033-538 Fax Sending Image Process Error 033-539 Fax Receiving Image Process Error 033-540 Fax Printing Image Process Error 033-541 No destination specified 033-542 Selected Channel Dial Error 033-543 Dial Error (Incorrect Dial Data) 033-544 Busy tone detect 033-545 T0 Timeout 033-546 Cannot detect dial tone 033-547 Abort during transmission 033-548 No manual send line 033-549 Fax service disabled 033-550 cannot diable FAX service 033-551 Internal I/F Error 033-552 too many Error lines 033-553 no mailbox/relay 033-554 Wrong Password/Receive Banned 033-555 incorrect password 033-556 Wrong Password/Send Banned 033-557 Desinations or Sevices Exceeded 033-558 remote ID is in black list 033-559 no remote ID 033-560 illegal authentication ID 033-561 cannot do TRESS/RCC job 033-562 held RCC job 033-563 No printable paper size 033-564 Power Off during transmission 033-565 No of Desinations Exceeded 033-566 No destination specified 033-567 Dial Error (Incorrect Dial Data) 033-568 FCM watchdog timeout in FAX comm 033-569 Detected image direction conflict 033-570 Retry Over(no shutdown notification setting) 033-571 Manual send job canceled(FaxReportLogFull) 033-572 FaxReport print job canceled(JobFull occured) 033-573 domain regulation check error 033-574 Access to a non-mounted channel 033-575 Modem Polarity Inversion Detected 033-576 Inaccurate dial data 033-577 Modem Image Under Run 033-578 Modem Frame Size Over 033-580 Missing VoIP Gateway 033-581 Access Authentication failure Code Description 033-582 Mismatched ability 033-583 Temporarily unavailable 033-584 SIP request timeout 033-585 SIP request error 033-586 T38 Protocol Not Ready 033-587 T38 Session Error 033-588 T38 Packet Lost 033-589 T38 Malformed Packet Received 033-590 T38 Send Error 033-591 FoIP Max Sessions Over 033-592 FoIP Internal Timeout 033-593 Canceled By Remote Peer 033-710 Document does not exist 033-711 Illegal Page inside Document 033-712 System Memory exceeded 033-713 No specified Chain Link 033-714 Scan Error (No specified doc) 033-715 Cannot start job 033-716 No specified Mailbox 033-717 Incorrect Password 033-718 No Document in Mailbox 033-719 Fax job Canceld not recovery job 033-720 Document Creation Failed 033-721 Fax Page Creation Failed 033-722 Fax immediate send store job canceled 033-724 Fax receive memory over flow 033-725 Insufficient HDD Space 033-726 Cannot print 2-Sided 033-727 Cannot rotate image 033-728 Auto print canceled 033-730 Fax Service recovery error 033-731 Inconsistent Instructions 033-732 Print job canceled by forced polling 033-733 Fax document number get error 033-734 Fax Print Suspension 033-735 Fax Memory Allocate Timeout 033-736 Internet FAX Off Ramp fail 033-737 Fax card job canceled 033-738 JBIG Information fail 033-740 Fax immediate receive print canceled 033-741 Fax page read open timeout 033-742 Fax page read close timeout 033-743 Fax page write open timeout 033-744 Fax page write close timeout 033-745 Fax data write timeout 033-746 Fax data read timeout 033-747 Fax Service don’t start by cross ope 033-748 Fax Service illigal sequence 033-749 Fax card Memory Error Code Description 033-750 Fax format error 033-751 Activity Report suspended by Printing Inhibition 033-755 Fax printing is canceled by the defect of Fax card 033-790 EP-DX Call Wait (Not Redial count) 033-791 EP-DX Call Wait (Redial count) 033-792 EP-DX Call Stop 034-211 Slot1 Board failure 034-212 Slot2 Board failure 034-500 Dial Error (Incorrect Dial Data) 034-501 Selected Channel Dial Error 034-502 Fax Internal Must Parameter Error 034-503 Fax Internal High Layer Service Error 034-504 Fax Stored Memory Exceeded 034-505 Fax Work Memory Exceeded 034-506 Unsupported Function at Remote 034-507 Password Check Error 034-508 Transmission Canceled via DTMF 034-509 DTMF Illegal Procedure Error 034-510 DTMF Procedure Error 034-511 Unable to Send File at Remote 034-512 Detect Endless Loop 034-513 Receive Command Error 034-514 Requested Function Unsupported 034-515 Illegal Command Received 034-519 No of Desinations Exceeded 034-520 No of Sevices Exceeded 034-521 Internal I/F Error 034-522 No manual send Line 034-523 Fax service disabled 034-524 Unable to cancel operation 034-525 Specified Chainlink not exist 034-526 Chainlink No out of scope 034-527 Dial Control Error 034-528 Cannot perform manual send 034-529 No printable paper size 034-530 DTMF I/F Timeout 034-550 Downloader Fail 034-700 GCPLock-G3DicepBusy-CodecHang 034-701 Software Reset 034-702 No destination specified 034-703 D Channellink cut from network 034-704 ISDN D Channel Data Link Error 034-705 ISDN Layer 1 Stopped-Power on 034-706 ISDN Layer 1 Stopped-Power off 034-707 FRMR Received 034-708 Illegal Frame Received N(R) 034-709 Illegal Frame Received 034-710 DL Link Establishment Received 034-711 Waiting for link Timeout Code Description 034-712 Internal Error (Interrupt) 034-713 Timeout-Transmission canceled 034-714 Line Disconnected-Timeout T305 034-715 Line Disconnected-Timeout 3082 034-716 Connection Timeout (T313) 034-717 Resume Timeout 034-718 Normal Disconnection 034-719 No free and available lines 034-720 Timeout (60s,T330,309,301,310)” 034-721 Error (Format, Contents) ” 034-722 Suspension Timeout 034-723 No Timer Assigned 034-724 Illegal Sequence 034-725 L3 Task Internal Error 034-726 HD81501 I/F Buffer Busy 034-727 No Reply for 3 sec for 1300Hz 034-728 Invalid Destination 034-729 Line cut, In-Channel PB Send” 034-730 In and out call conflict 034-731 Fax Network Cut (Setup Error) 034-732 Fax Network Cut due to Timeout 034-733 Incorrect Sequence,Call Status” 034-734 HI Task Internal Error 034-735 Connect only to ISDN D Channel 034-736 Wrong notice from fax network 034-737 Incoming call response error 034-738 Layer 1 Start Up Error 034-739 Layer 1 not synchronized 034-740 Transmission of Frame Error 034-741 Unable to Send Frame 034-742 Frame Send Underrun Detected 034-743 Abnormal frame-sending DMA 034-744 Unacceptable Channel 034-745 Outgoing call to channel set 034-746 No usable lines 034-747 Switching equipment congestion 034-748 Specified line cannot be used 034-749 Network Conjestion Error 034-750 Network Error 034-751 Temporary Network Error 034-752 Destination terminal busy 034-753 Destination not responding 034-754 No response from Destination 034-755 Destination rejecting call 034-756 Destination Faulty 034-757 Others (Normal, Semi-normal) ” 034-758 Incorrect Destination Fax Dial No 034-759 No Relay Network Route 034-760 No Line To Destination Code Description 034-761 Incorrect Format Destination Fax No 034-762 Facility rejected 034-763 Com Capability disallowed 034-764 Com Capability not configured 034-765 Error by service,feature limit ” 034-766 Selected com not implemented 034-767 Selected mode not implemented 034-768 Restricted Digital Info Only 034-769 Error by service, feature” 034-770 Reply to status query 034-771 Access information discarded 034-772 Inter-working connection error 034-773 Invalid Dial No Specified 034-774 Invalid Line Specified 034-775 Others (Invalid Message Class) 034-776 Insufficient Required Info 034-777 Undefined Message Type 034-778 Incorrect Message or Type 034-779 No information, or not defined” 034-780 Invalid Information 034-781 Call Status, Message Mismatch” 034-782 Error cleared due to timeout 034-783 Other Errors (Operation, etc) ” 034-784 Destination No Changed 034-785 Incompatible destination 034-786 Call identity not in use 034-787 Call identity in use 034-788 Show other causes 034-789 G4 Presentation Illegal Event 034-790 Line 0 (Ext) not connected 034-791 Line 1 not connected 034-792 Line 2 not connected 034-793 Line 3 not connected 034-794 Line 4 not connected 034-795 Line 5 not connected 034-796 Dial Error (Incorrect Fax No 2) 034-797 Communication Parameter Error 034-798 Data Parameter Error 034-799 Auto Dial without dial data 035-550 Downloader Fail 035-700 Modem faulty 035-701 T1 Transmission Timeout 035-702 Destination Receive Rejected 035-703 DCN Receive at Phase B Send 035-704 Destination Polling Error 035-705 DCS/NSS Resend Exceeded 035-706 Fallback Error 035-707 Wrong Password/Receive Banned 035-708 Post-message resend exceeded Code Description 035-709 RTN Receive 035-710 PIN Receive 035-711 DCN Receive at Phase D 035-712 No response after 3 NSC 035-713 T2 timeout after sending FTT 035-714 DCN Received after NSC/DTC 035-715 Wrong Password-Polling Error 035-716 No past message-T2 Timeout 035-717 RTN Send 035-718 Receive T1 Timeout 035-719 Busy tone detected at Phase-B 035-720 Unable to receive by remote 035-721 DCN Received at Phase B 035-722 Wrong frame length of 300bps 035-723 No CD after receiving flag 035-724 DCN Receive after sending FTT 035-725 Remote has no Mailbox/Relay 035-726 PhaseC cannot receive-10 secs 035-727 50% Error during G3 Receive 035-728 C EOL cannot receive in 10 sec 035-729 Carrier Down Detected 035-730 No CS with Phase-C High Speed 035-731 Fax V8 Error 035-732 Fax V34 PCH CD Off 035-733 Fax V34 C/PCH CS None 035-734 Polling ERR at Remote Step V8 035-735 No Doc in Polling Box Step V8 035-736 No reply DCN after sending CTC 035-737 No reply DCN after sending EOR 035-738 No reply DCN after sending RR 035-739 Fax T5 Timeout 035-740 Sending stopped after EOR Send 035-741 ECM Phase C Flag Timeout 035-742 EOR Send or Receive 035-743 Remote cannot receive SUB 035-744 Remote cannot receive password 035-745 PTX has no SEP capability 035-746 Busy-Cannot detect dial tone 035-747 Abort while dialing 035-748 Abort during transmission 035-749 No reply from remote station 035-750 Power Off during transmission 035-751 Doc send operation canceled 035-752 No of Job Restriction Error 035-753 Fax Memory Full 035-754 File management memory full 035-755 File Add Page Error 035-756 Cannot add page 035-757 No Receive Page Code Description 035-758 No specified file or page 035-759 No specified job 035-760 File common processing error 035-761 File other processing error 035-762 Line cut during ISDN 036-500 Illegal PDRP Parameter 036-501 Illegal RDPBP Parameter 036-502 Illegal RDPBN Parameter 036-503 Illegal RDCLP Parameter 036-504 Illegal RDGR Parameter 036-505 Undefined response 036-506 Not negotiable 036-507 RDPBP Receive at full capacity 036-508 RDPBN Receive Terminal Error 036-509 RDPBN Receive Others 036-510 RDGR Receive 036-511 Illegal procedure 1551 036-512 Illegal CDS Parameter 036-513 Illegal CDC Parameter 036-514 Illegal CDE Parameter 036-515 Illegal CDD Parameter 036-516 Illegal CDR Parameter 036-517 Illegal CDPB Parameter 036-518 Illegal CDCL Parameter 036-519 Undefined Command 036-520 Not Negotiable CDS Receive 036-521 Not Negotiable CDC Receive 036-522 CDD Receive Terminal Error 036-523 Other than above CDD receive 036-524 CDR Receive Terminal Error 036-525 Other than above CDR receive 036-526 Illegal CDUI (Normal Doc) 036-527 Illegal CDUI (Operator Doc) 036-528 Illegal CDUI (Control Doc) 036-529 Illegal CDUI (Monitor Doc) 036-530 CDSReceive-Illegal Document 036-531 DMA channel 1 illegal closing 036-532 DMA channel 2 illegal closing 036-533 Cannot convert resources 036-534 Decode Error in Data Convert 036-535 White Line Transfer Error (Compress) 036-536 White Line Transfer Error (Decomp) 036-537 No RTC during data convert 036-538 Doc descriptor analysis error 036-539 Page Descriptor Analysis Error 036-540 Text Unit Analysis Error 036-541 Page boundary without TU 036-542 Relay Broadcast error in G4 036-550 Downloader Fail Code Description 036-700 G4 Communication Error 036-701 Receiving variable N(R) error 036-702 Info frame size exceeded (NI) 036-703 Monitor/Unnumbered frame error 036-704 Undefined Command/Response 1104 036-705 N2 timeout of Receive Timer 036-706 SABM Wait Timeout in G4 036-707 UA wait Timeout in G4 036-708 Cannot establish link in G4 036-709 DISC receive before link close 036-710 FRMR Receive (Z=1) 036-711 FRMR Receive (Y=1) 036-712 FRMR received (Z=1) W=1 036-713 FRMR Receive (W=1) 036-714 Global Address Receive 036-715 Line Open Timeout in G4 036-716 Wrong LSI Send (Busy Timeout) 036-717 Abnormal LSI operation 036-718 Disconnection Notice Timeout 036-719 C Line On but I Line Off 036-720 C Line Off but I Line On 036-721 I Line Off during Transmission 036-722 Call cut during flag detect 036-723 Call cut while awaiting UA 036-724 Call cut while awaiting SABM 036-725 Disc received before session 036-726 Illegal header received 036-727 Illegal parameter of CC packet 036-728 Illegal parameter of CN packet 036-729 Illegal parameter of DT packet 036-730 Illegal parameter of RI packet 036-731 Illegal parameter of IT packet 036-732 Illegal parameter of CI packet 036-733 Illegal parameter of CF packet 036-734 Undefined Packet Received 036-735 CC Wait Timeout 036-736 CF Wait Timeout 036-737 CI received before G4 session 036-738 DT Packet P(S ), P(R ) Error” 036-739 RR, RNR Packet P(S) Error ” 036-740 Busy Timeout 036-741 SI received in transmission 036-742 SF received in transmission 036-743 DT Packet D Bit Error 036-744 G4 Wait for Reply Timeout 036-745 G4 CN Wait Timeout 036-746 G4 Data Link Disconnect Notice Timeout 036-747 Fast select response received 036-748 Receive remote charge request Code Description 036-749 Abnormal LCGN 036-750 Illegal procedure 1301 036-751 Illegal TCA Parameter 036-752 Illegal TCR Parameter 036-753 Illegal TCC Parameter 036-754 Illegal TBR Parameter 036-755 Illegal TDT Parameter 036-756 Undefined transport block 036-757 TCA Wait Timeout 036-758 TCR Wait Timeout 036-759 TCC Wait Timeout 036-760 TBR Wait Timeout 036-761 TDT block size error 036-762 G4 NetWork Disconnect Notice Timeout 036-763 Illegal procedure 1401 036-764 Illegal CSS Parameter 036-765 Illegal CSE Parameter 036-766 Illegal CSA Parameter 036-767 Illegal CSUI Parameter 036-768 Illegal CSCC Parameter 036-769 Illegal RSSP Parameter 036-770 Illegal RSSN Parameter 036-771 Illegal RSEP Parameter 036-772 Illegal RSAP Parameter 036-773 Illegal RSUI Parameter 036-774 Illegal RSCCP Parameter 036-775 Undefined command/response 1413 036-776 RSSN Receive 036-777 G4 Line Disconnect Notice Timeout 036-778 CSA received (wrong terminal) 036-779 CSA Receive (Others) 036-780 CSS Wait Timeout 036-781 RSSP Wait Timeout 036-782 RSAP Wait Timeout 036-783 RSEP Wait Timeout 036-784 RSCCP Wait Timeout 036-785 CSUI/RSUI Wait Timeout 036-786 Incorrect Password (RSSN) 036-787 Wrong Password-Polling Error for Remote 036-788 Poll Send Error at Remote 036-789 No Password for RSSP Receive 036-790 Polling rejected by remote 036-791 Set Password-RSSP Received 036-792 CSE Received after RSSP Send 036-793 Select communication error 036-794 Line cut during ISDN mode 036-795 Canceled by remote station 036-796 Sent without multiple sets 036-797 Illegal procedure 1501 Code Description 036-798 Illegal RDEP Parameter 036-799 Illegal RDDP Parameter 041-500 Write to IOT-ROM error detection (During DLD method) 041-501 Write to IOT-NVM-ROM error detection (During DLD method) 048-500 IF-Module ROM Write Error 049-500 HCS1 ROM Write Error 049-700 Out tray changed from stacker1 049-950 HCS1 MIX SIZE STACK Fail 049-973 Stacker Extraction button was pushed 062-394 Cont PWBA Memory Fail 062-500 Write to IISS-ROM error detection (During DLD method) 062-790 Possible Prohibited Originals 063-500 Write to IISS-Extension-ROM error detection (During DLD method) 071-940 Tray#1 LiftUp NG 072-940 Tray#2/TTM#2 LiftUp NG 073-940 Tray#3/TTM#3 LiftUp NG 074-940 Tray#4 LiftUp NG 077-911 Paper size mismatch, job contniue” 077-967 Paper kind mismatch (APS job) 077-968 Paper kind mismatch, job contniue ” 078-500 Write to HCF-ROM error detection (During DLD method) 078-940 2000A3-HCF paper misset 078-941 2000A3-HCF size mismatch 078-942 4000A3HCF lower tray paper misset 078-943 4000A3HCF lower tray size mismatch 093-434 Drum/Toner Cartridge K Near Empty 093-435 Drum/Toner Cartridge Quality Empty 093-940 Toner Y CRUM Comm Fail 102-356 EWS Soft Fail 102-380 MF UI cont Soft Fatal error 102-381 Data Link Layer Error (UI-Panel) 102-382 Application Layer Command Error (UI-Panel) 103-310 Hybrid Water Mark Not Exist 103-311 Hybrid Water Mark Setting Mismatch 103-312 Hybrid Water Mark Not Exist (Back Side) 103-313 SW Option Fail (IISS Mem for HWM Not Exist) 112-700 Punch Dust Near Full 116-210 MediaReader Faital Error 116-211 MediaReader Cable No Joint 116-212 MediaLib SW Logic Fail 116-220 Transition to Download Mode Download Initialization Failure 116-310 ESS Font ROM DIMM #2 Check Fail 116-311 ESS Font ROM DIMM #3 Check Fail 116-312 HDD Encrypt Key Fail 116-313 HDD Encrypt Set Up Fail 116-314 Ethernet Address Fail 116-315 ESS RAM DIMM #1 W/R Check Fail 116-316 ESS RAM DIMM #2 W/R Check Fail 116-317 Standard ROM DIMM Check Fail Code Description 116-318 Op ROM DIMM Check Fail 116-319 Mismatch Cont ROM and Panel config 116-320 STREAMZ Soft Fatal error 116-321 System Soft Fatal error 116-322 WebDAV S/W Fail 116-323 ESS NVRAM W/R Check Fail 116-324 Exception Fail 116-325 ESS Fan Fail 116-328 L2 Cache Fail 116-329 Serial IF Soft Fail 116-330 HDD File System Fail 116-331 Invalid Log Info 116-332 ESS Standard ROM Error 116-333 LocalTalk Soft Fail 116-334 ESS NVRAM Data Compare Fail 116-336 Redirector HD Fail 116-337 SNTP S/W Fail 116-338 JBA fatal error 116-339 JBA No HD 116-340 Memory Not Enough 116-341 ROM VER Incorrect 116-342 SESAMi Manager Fail 116-343 Main PWBA IC Fail 116-345 TokenRing Board Fail 116-346 Formatter Fail 116-347 LocaTalk Board Fail 116-348 Redirecter Fail 116-349 SIF Fail to Call Pflite 116-350 AppleTalk Soft Fail 116-351 EtherTalk Soft Fail 116-352 NetWare Soft Fail 116-353 HDD Phisycal Fail 116-354 HDD Product Fail 116-355 Agent Soft Fail 116-356 HDD Format Fail 116-357 PostScript Error 116-358 Salutation Soft Fail 116-359 PLW Soft Fail 116-360 SMB Soft Fail 116-361 Spool Fatal HDD 116-362 SSDP Soft Fail 116-363 BMLinkS/Print Service Soft Fail 116-364 Timer Fail 116-365 Spool Fatal 116-366 Report Gen Soft Fail 116-367 Parallel IF Soft Fail 116-368 Dump Print Fail 116-370 XJCL Fail 116-371 PCL Decomp S/W Fail Code Description 116-372 P-Formatter Fail 116-373 Dynamic DNS Soft Fail 116-374 Auto Switch Fail 116-375 I-Formatter Fail 116-376 Port 9100 Software Fail 116-377 Video DMA Fail 116-378 MCR Soft Fail 116-379 MCC Soft Fail 116-380 ESS Font ROM DIMM #1 Check Fail 116-381 ABL Initialize Fail 116-382 ABL Phisycal Initialize Fail 116-383 PIT Lib Failure 116-384 DCS Software Fail 116-385 IDC Software Fail 116-386 Incorrect USB port used for FAX 116-387 MRC HW Fatal Error 116-388 No HD that Should Be 116-389 No Add-On RAM that Should Be 116-390 Standard ROM and NVM Version Mismatch 116-391 Illegal code (country/territory/size group) 116-392 Machine Code Check Fail 116-393 AAA Manager S/W Fail 116-394 AAA Manager detect illegal setting Auth & Acct 116-395 USB Soft Fail 116-396 FIPS140 Self-Test Fail 116-397 AAAmgr illegal setting area coverage threshold 116-399 MUnder initialization for 10 minutes 116-700 Image Extension Kit Insufficient Memory 116-701 Out of Memory-Duplex Fail 116-702 Print with Substitute Font 116-703 PostScript LANG Interprete ERR 116-704 MediaReaderMedia No Insert(No Job) 116-705 MediaReader Format Error(No Job) 116-706 MediaReader:File Attribute Read Error(No Job) 116-707 MediaReader:Image File Read Error(No Job) 116-708 MediaReader:File Attribute Read Error(In Job) 116-709 MediaReader:Image File Read Error(In Job) 116-710 HP-GL/2 Memory Overflow 116-711 PLW Size/orientation mismatch 116-712 Out of Area-Form REGI ERR 116-713 Job divided by HDD Full 116-714 HP-GL/2 Command ERR 116-715 Max Form to PLW Registered 116-716 MediaReader File Not Exist 116-717 MediaLib:Not Excecute of New Request 116-718 Selected PLW Form Not Registered 116-719 XPIF Parameter Cancelled 116-720 PCL Memory Low,Page Simplified” 116-725 HDD full for Image Log Code Description 116-737 Out of Area-Data REGI ERR 116-738 Size/orientation mismatch 116-739 Out of Disk Area-Form/Logo REGI ERR 116-740 Arithmetic Error 116-741 Max Form to Not PLW Registered 116-742 Max Logo Registered 116-743 Out of Buffer Area-Form/Logo REGI ERR 116-745 ART Command ERR 116-746 Selected Form Not Registered 116-747 Invalid Page Margin 116-748 Page without Image Draw Data 116-749 PostScript Font error 116-751 HDD Full Warning 116-752 Print job ticket description warning 116-771 Invalid JBIG Param DL Fixed 116-772 Invalid JBIG Param D Fixed 116-773 Invalid JBIG Param P Fixed 116-774 Invalid JBIG Param YD Fixed 116-775 Invalid JBIG Param L0 Fixed 116-776 Invalid JBIG Param MX Fixed 116-777 Invalid JBIG Param MY Fixed 116-778 Invalid JBIG Par VLENGTH Fixed 116-780 Attached Document Error 116-790 Stapling Canceled 117-310 WSD Scan S/W Fail 117-311 Wrong insertion of security enhancing kit 117-312 Device Self Test Error 117-316 Contract Manager Software Fail 117-317 Contract Manager PPP_contract Finishing Fail 117-318 Contract Manager PPP DC Command Fail 117-319 SD Card Program or Font Data Access Fail 117-320 SD Card HW Fail 117-321 SD Card Invalid Type Fail 117-322 SD Card Encrypt Fail 117-323 SD Card File Access Fail 117-324 SD Card Other Product Fail 117-325 Contract Manager RTC Hardware Fail 117-326 ESS NVRAM SW Access Fail 117-327 ESS NVRAM (SD Card) HW Access Fail 117-328 Detect invalid combination of function for image log Fail 117-329 SD Card Not Found Fail 118-310 IPSEC Intenal Fail 121-310 EPSV-Accessory Communication Fail 121-311 IC Card Auditron Passwd Fail 121-312 IC Card Auditron Accessory Fail 121-313 IC Card Auditron Software-key Fail 121-314 Customize User Prompts Fail 121-316 EP Accessory conflicts with SecureAccess 121-317 Continuous JOB setting missmatch of EPLyzer Code Description 121-318 Auth/Accout Settings Is Not Supported 121-319 Fax Send Charging and Internet FAX Setting Confliction 121-320 EP-SV Setting information conflict fail 121-321 EP-DX Setting information conflict fail 121-322 Controller Price Table Error 121-323 Web EP Software Fail 121-324 Fax Send Charging And Scan Setting Confliction 121-333 EPSV-EP M/C Communication Fail 121-334 EPSV Login Fail 121-335 EPSV Wake Up Answer Fail 121-336 Unknown EP Accessory 121-337 EP Accessory Self Diag Fail 121-338 EPSV Answer Time Out 121-339 Price Table Error 121-340 EP Accessory Miss Match 121-350 EPSV Logic Fail 121-370 EP-DX – unexpected error 123-207 Comm Manager Target Fail (UI-Panel) 123-209 EVM Returns Wrong Value (UI-Panel) 123-310 Send Queue Full (UI-Panel) 123-311 Receive Queue Full (UI-Panel) 123-312 Diag mode change Fail (Punch unit type set) 123-317 Receive Message Queue Full (UI-Panel) 123-318 Receive Finish Queue Full (UI-Panel) 123-320 NVM initialized for FCW composition 123-322 Target Fail (UI-Panel) 123-323 Address Fail (UI-Panel) 123-325 Object Creation Fail (UI-Panel) 123-326 Memory Overflow (UI-Panel) 123-327 Button Overflow (UI-Panel) 123-328 UI Internal Fail with Out of Area 123-329 UI Internal Fail with Invalid Coordinates 123-332 I/F Fail (Invalid Parameter CP) 123-333 I/F Fail (Impossible Communication) 123-337 Frame Data Error with Invalid Data Type 123-341 Event Queue Full (UI-Panel) 123-342 Event Queue Empty (UI-Panel) 123-343 Invalid Class (UI-Panel) 123-344 Invalid Type (UI-Panel) 123-345 Timer Queue Full (UI-Panel) 123-346 Invalid Timer Number (UI-Panel) 123-350 One Touch Key Fail (MCW) 123-352 Sys EEPROM Read Error(UI-Panel) 123-353 UI Cable Connect Error(UI-Panel) 123-354 Decrease in 24V Error(UI-Panel) 123-355 Decreas in 5V Error(UI-Panel) 123-356 FAX OTK Cable Connect Error(UI-Panel) 123-357 Sys EEPROM Write Error(UI-Panel) 123-358 Log EEPROM Write Error(UI-Panel) Code Description 123-362 No Object (UI-Panel) 123-368 Short of UI Memory (UI-Panel) 123-369 Invalid Interface Value (UI-Panel) 123-370 Interface Length Fail (UI-Panel) 123-371 Interface Parameter Fail (UI-Panel) 123-372 Interface Sequence Fail (UI-Panel) 123-373 Channel Fail (UI-Panel) 123-374 Invalid User Job ID (UI-Panel) 123-375 Internal Resource Fail (UI-Panel) 123-376 Internal Memory Fail (UI-Panel) 123-377 UI Timer Fail (UI-Panel) 123-378 Interface Format Fail (UI-Panel) 123-379 Dispatch Fail (UI-Panel) 123-380 Copy Interface Fail (UI-Panel) 123-381 Fax Interface Fail (UI-Panel) 123-382 Scanner Interface Fail (UI-Panel) 123-383 Report Interface Fail (UI-Panel) 123-384 Server Access Fail (UI-Panel) 123-385 Service Object Overflow (UI-Panel) 123-386 Invalid Service Object (UI-Panel) 123-387 Invalid Service Object Attribute (UI-Panel) 123-388 Attribute Fail (UI-Panel) 123-389 Argument Fail (UI-Panel) 123-390 Job Parameter Fail (UI-Panel) 123-391 Job Actual Parameter Fail (UI-Panel) 123-392 Auditron Fail (UI-Panel) 123-393 EP Fail (UI-Panel) 123-394 File Access Fail (UI-Panel) 123-395 NVM Fail (UI-Panel) 123-396 FF Fail (UI-Panel) 123-397 MGR Fail (UI-Panel) 123-398 Delay Release Queue Full (UI-Panel) 123-399 Internal Fail (UI-Panel) 123-400 JRM I/F Internal Fail (UI-Panel) 124-310 DC132 11 124-311 DC132 09 124-312 DC132 12 124-313 DC132 10 124-314 DC132 01 124-315 DC132 02 124-316 DC132 03 124-317 DC132 04 124-318 DC132 07 124-319 DC132 08 124-320 SEEPROM Fail 124-321 Backup SRAM Fail 124-322 DC132 05 124-323 DC132 06 124-324 All Billings Mismatch Code Description 124-325 Billing Restoration Fail 124-326 IOT Speed Not Registered 124-327 IOT Speed Change SW Fail 124-328 Punch Unit User Initial SetUp 124-331 ESS ROM DIMM #1 Not Found 124-332 contract data mismatch 124-333 ASIC Fail (Panther) 124-334 Standard Font ROM Error 124-335 Font ROM Not Found 124-337 ESS Standard RAM Error 124-338 Same Font ROMs Found 124-339 ROM DIMM of Another Product Found 124-340 CRUM Market fail ALL 124-341 CRUM Market fail MCU 124-342 CRUM Market fail SYS 1 124-343 CRUM Market fail SYS 2 124-344 All Billings Metertypes Mismatch 124-345 Billing Meter Type Restoration Fail 124-346 All Billing CountTypes Mismatch 124-347 Billing CountType Restoration Fail 124-348 All Modal Break Points Mismatch 124-349 Modal Break Point Restoration Fail 124-350 CRUM OEM fail ALL 124-351 CRUM OEM fail MCU 124-352 CRUM OEM fail SYS 1 124-353 CRUM OEM fail SYS 2 124-360 CRUM validation fail ALL 124-361 CRUM validation fail MCU 124-362 CRUM validation fail SYS 1 124-363 CRUM validation fail SYS 2 124-372 IOT sc Soft Fail 124-373 IOT Manager SW Fail 124-374 IOT IM DeviceDriver SW Fail 124-380 CRUM Market fail ALL (2) 124-381 CRUM Market fail MCU (2) 124-382 CRUM Market fail SYS 1 (2) 124-383 CRUM Market fail SYS 2 (2) 124-390 CRUM OEM fail ALL (2) 124-391 CRUM OEM fail MCU (2) 124-392 CRUM OEM fail SYS 1 (2) 124-393 CRUM OEM fail SYS 2 (2) 124-700 Trimming Cancelled 124-701 Output tray changed from Side Tray 124-702 Output tray changed from Stacker 124-703 Booklet Tray to Center Tray 124-704 Envelop Folder Tray to Center Tra 124-705 Punching Canceled 124-706 Folding Canceled 124-708 Changed To Sub Tray Code Description 124-709 Stapler sheets counts over warning 124-710 Output Tray changed from MailBoxSorter 125-311 PSWcont Unexpected Fail 127-210 DFE Communication Fail 127-211 DFE Parameter Error 127-212 ExtPrint Check Mode Error 127-213 ExtPrint I/F Mismatch 127-220 DEF Communicaiton Error (video) 127-221 DEF Communicaiton Error (Command) 127-310 ESR Task Fatal error 127-311 ExtPRTc Fatal Error 127-312 DFE Video Link Fail 127-313 ESS Video Link Fail 127-314 WSD Print S/W Fail 127-315 ThinPrint S/W Fail 127-320 DFE Critical Fail 127-337 JobTemplate HDD Write Error 127-342 JobTemplate Monitor Fail 127-353 LPD Soft Fatal error 127-354 FTP Server Software Fail 127-396 MailIO Soft Fatal error 127-398 IPP Soft Fatal error 127-399 JME Soft Fatal error 127-700 SIP Registration Fail 133-210 Fax Parameter incorrect 133-211 Fax Parameter Value Invalid 133-212 Fax Read Erro No Data 133-213 Fax Read Error-Invalid Data 133-214 Fax USB Open Fail in Initializing 133-215 Fax USB Device Fatal Error 133-216 Fax USB Host Fatal Error 133-217 Fax Manager Short of Memory 133-218 Fax Card Message Library Short of Memory 133-219 Fax Short of Work Memory 133-220 Fax Control task detects error 133-221 Fax Card not respond when system is Booting 133-222 Fax Card does not respond intervally 133-223 Fax Card Reset 133-224 Controller ROM Fax Card ROM mismatch 133-225 Fax address book illegal setting 133-226 Illegal country code for Fax 133-280 Fax Option Slot1 Board Fail 133-281 Received unknown message 133-282 Fax Card download fail 133-283 Fax report mail box not open 133-700 Staple/Punch Canceled 133-710 Tray select fail Used SMH instead 134-210 Fax Cont Parameter Invalid 134-211 Fax Card Main Board Failure Code Description 202-399 JME Soft Fatal error 500-030 DC612 Print NG By IOT Wait State 500-990 DC612 Print NG By Any Reason
Loading…
|
WorkCentre 7132 |
While Xerox has tried to make the documentation accurate, Xerox will have no liability arising |
|
out of any inaccuracies or omissions. |
|
|
Service Documentation |
WorkCentre 7132
705P01181 (EDOC/SGS)
Revision
January 2007
***Xerox Private Data***
All service documentation is supplied to Xerox external customers for informational purposes only. Xerox service documentation is intended for use by certified, product-trained service personnel only. Xerox does not warrant or represent that it will notify or provide to such customer any future change to this documentation. Customer performed service of equipment, or modules, components, or parts of such equipment may affect whether Xerox is responsible to fix machine defects under the warranty offered by Xerox with respect to such equipment. You should consult the applicable warranty for its terms regarding customer or third-party provided service.
If the customer services such equipment, modules, components or parts thereof, the customer releases Xerox from any and all liability for the customer actions, and the customer agrees to indemnify, defend and hold Xerox harmless from any third party claims which arise directly or indirectly from such service.
While Xerox has tried to make the documentation accurate, Xerox will have no liability arising out of any inaccuracies or omissions. Changes are periodically made to this document. Changes, technical inaccuracies, and typographical errors will be corrected in subsequent editions.
©Copyright 2007 Xerox Corporation. All rights reserved.
Global Knowledge & Language Services
800 Phillips Road — Bldg. 845-17S
Webster, New York 14580-9791
USA
Printed in the United States of America.
XEROX®, The Document Company®, the stylized X and the identifying product names and numbers herein are trademarks of XEROX CORPORATION.
All non-Xerox brands and product names are trademarks or registered trademarks of their respective companies
WARNING
This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions documentation, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to subpart B of part 15 of FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user, at his own expense, will be required to correct the interference.
|
Preliminary Working Document |
0/0/00 |
Section Name |
|
No Product Name Assigned |
?-1 |
Introduction
|
About this Manual …………………………………………………………………………………………….. |
iii |
|
Organization…………………………………………………………………………………………………….. |
iii |
|
How to Use this Documentation………………………………………………………………………….. |
iv |
|
Symbology and Nomenclature ……………………………………………………………………………. |
v |
|
Translated Warnings …………………………………………………………………………………………. |
viii |
|
Reversion 4.0 |
January 2007 |
Introduction |
|
WorkCentre 7132 |
i |
About this Manual
This Service Manual is part of the multinational documentation system for
WorkCentre 7132. The Service Documentation is used in order to diagnose machine malfunctions, adjust components and has information which is used to maintain the product in superior operating condition. It is the controlling publication for a service call. Information on its use is found in the Introduction of the Service Documentation.
This manual contains information that applies to NASG (XC) and ESG (XE) copiers.
Service Manual Revision
The Service Manual will be updated as the machine changes or as problem areas are identified.
Organization
This Service Manual is divided into eight sections. The titles of the sections and a description of the information contained in each section are contained in the following paragraphs:
Section 1: Service Call Procedures
This section contains procedures that determine what actions are to be taken during a service call on the machine and in what sequence they are to be completed. This is the entry level for all service calls.
Section 2: Status Indicator RAPs
This section contains the diagnostic aids for troubleshooting the Fault Code and non-Fault Code related faults (with the exception of image quality problems).
Section 3: Image Quality
This section contains the diagnostic aids for troubleshooting any image quality problems, as well as image quality specifications and image defect samples.
Section 4: Repairs/Adjustments
This section contains all the Adjustments and Repair procedures.
Repairs
Repairs include procedures for removal and replacement of parts which have the following special conditions:
When there is a personnel or machine safety issue.
When removal or replacement cannot be determined from the exploded view of the Parts List.
When there is a cleaning or a lubricating activity associated with the procedure. When the part requires an adjustment after replacement.
When a special tool is required for removal or replacement.
Use the repair procedures for the correct order of removal and replacement, for warnings, cautions, and notes.
Adjustments
Adjustments include procedures for adjusting the parts that must be within specification for the correct operation of the system.
Use the adjustment procedures for the correct sequence of operation for specifications, warnings, cautions and notes.
Section 5: Parts Lists
This section contains the Copier/Printer Parts List.
Section 6: General Procedures/Information
This section contains General Procedures, Diagnostic Programs, and Copier/Printer Information.
|
Reversion 4.0 |
January 2007 |
Introduction |
|
WorkCentre 7132 |
iii |
Section 7: Wiring Data
This section contains drawings, lists of plug/jack locations, and diagrams of the power distribution wire networks in the machine. This section also contains the Block Schematic Diagrams.
How to Use this Documentation
The Service Call Procedures in Section 1 describe the sequence of activities used during the service call. The call must be entered using these procedures.
Section 8: Options and Accessories
This section contains installation information for option and accessory.
Use of the Circuit Diagrams
All wirenets are shown on the Circuit Diagrams (CDs). Power distribution wirenets are shown in Section 7 (Wiring Data) of the Service Manual. The power distribution wirenets on the CDs will end at the terminal board for the power being distributed. Find the wirenet for that power and locate the terminal board on the wirenet. Use the wirenet to troubleshoot any power distribution wiring not shown on the CD.
Use of the Block Schematic Diagrams
Block Schematic Diagrams (BSDs) are included in Section 7 (Wiring Data) of the Service Manual. The BSDs show the functional relationship of the electrical circuitry to any mechanical, or non-mechanical, inputs or outputs throughout the machine. Inputs and outputs such as motor drive, mechanical linkages, operator actions, and air flow are shown. The BSDs will provide an overall view of how the entire subsystem works.
It should be noted that the BSDs no longer contain an Input Power Block referring to Chain 1. It will be necessary to refer to the Wirenets in order to trace a wire back to its source.
|
Introduction |
January 2007 |
Reversion 4.0 |
|
iv |
WorkCentre 7132 |
Symbology and Nomenclature
The following reference symbols are used throughout the documentation.
Warnings, Cautions, and Notes
Warnings, Cautions, and Notes will be found throughout the Service Documentation. The words WARNING or CAUTION may be listed on an illustration when the specific component associated with the potential hazard is pointed out; however, the message of the WARNING or CAUTION is always located in the text. Their definitions are as follows:
CAUTION
The use of controls or adjustments other than those specified in the Laser Safety Training Program may result in an exposure to dangerous laser radiation.
For additional information, review the Laser Safety Training program.
An arrow points to the location to install, to gain access to, or to release an object.
WARNING
A Warning is used whenever an operating or maintenance procedure, a practice, condition, or statement, if not strictly observed, could result in personal injury.
CAUTION
A Caution is used whenever an operating or maintenance procedure, a practice, condition, or statement, if not strictly observed, could result in damage to the equipment.
NOTE: A Note is used whenever it is necessary to highlight an operating or maintenance procedure, practice, condition, or statement.
Figure 2 Customer Access Label
This symbol indicates that a surface can be hot. Use caution when reaching in the machine to avoid touching the hot surfaces.
Machine Safety Icons
The following safety icons are displayed on the machine:
WARNING
This machine contains an invisible laser. There is no visual indication that the laser beam is present. During servicing, the machine is a Class 3B product because of the invisible laser. the laser beam could cause eye damage if looked at directly. Service procedures must be followed exactly as written without change. The service representative must observe the established local laser safety precautions when servicing the machine. Do not place tools with a reflective surface in the area of the ROS opening. Do not look in the area of the ROS window if the power is On and the laser is energized.
The following symbol and statement appear on a label in the machine. The symbol by itself, or the symbol and the statement may also appear in the service documentation and in the training program. When this symbol appears, the service representative is warned that conditions exist that could result in exposure to the laser beam.
WARNING
Do not try to bypass any laser interlocks for any reason. Permanent eye damage could result if the laser is accidentally directed into your eye.
Figure 1 Laser Hazard Symbol
Laser Hazard Statement
Figure 3 Heated Surface Label
Danger label indicates where electrical currents exist when the machine is closed and operating. Use caution when reaching in the machine.
Figure 4 Shock Hazard Label
These symbols indicate components that may be damaged by Electrostatic Discharge (ESD).
Figure 5 ESD warning Label
DANGER INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO
BEAM.
|
Reversion 4.0 |
January 2007 |
Introduction |
|
WorkCentre 7132 |
v |
Electrostatic Discharge (ESD) Field Service Kit
The purpose of the ESD Protection Program is to preserve the inherent reliability and quality of electronic components that are handled by the Field Service Personnel. This program is being implemented now as a direct result of advances in microcircuitry technology, as well as a new acknowledgment of the magnitude of the ESD problem in the electronics industry today.
This program will reduce Field Service costs that are charged to PWB failures. Ninety percent of all PWB failures that are ESD related do not occur immediately. Using the ESD Field Service Kit will eliminate these delayed failures and intermittent problems caused by ESD. This will improve product reliability and reduce callbacks.
The ESD Field Service Kit should be used whenever Printed Wiring Boards or ESD sensitive components are being handled. This includes activities like replacing or reseating of circuit boards or connectors. The kit should also be used in order to prevent additional damage when circuit boards are returned for repair.
The instructions for using the ESD Field Service Kit can be found in ESD Field Service Kit Usage in the General Procedures section of the Service Documentation.
Illustration Symbols
Figure 6 shows symbols and conventions that are commonly used in illustrations.
Figure 6 Illustration Symbols
|
Introduction |
January 2007 |
Reversion 4.0 |
|
vi |
WorkCentre 7132 |
Signal Nomenclature
Refer to Figure 7 for an example of Signal Nomenclature used in Circuit Diagrams and BSDs.
Figure 7 Signal Nomenclature
DC Voltage Measurements in RAPs
The RAPs have been designed so that when it is required to use the DMM to measure a DC voltage, the first test point listed is the location for the red (+) meter lead and the second test point is the location for the black meter lead. For example, the following statement may be found in a RAP:
There is +5 VDC from TP7 to TP68.
In this example, the red meter lead would be placed on TP7 and the black meter lead on TP68.
Another example of a statement found in a RAP might be:
There is -15 VDC from TP21 to TP33.
In this example, the red meter lead would be placed on TP21 and the black meter lead would be placed on TP33.
If a second test point is not given, it is assumed that the black meter lead may be attached to the copier frame.
Voltage Measurement and Specifications
Measurements of DC voltage must be made with reference to the specified DC Common, unless some other point is referenced in a diagnostic procedure. All measurements of AC voltage should be made with respect to the adjacent return or ACN wire.
|
Table 1 Voltage Measurement and Specifications |
|
|
VOLTAGE |
SPECIFICATION |
|
INPUT POWER 220 V |
198 VAC TO 242 VAC |
|
INPUT POWER 100 V |
90 VAC TO 135 VAC |
|
INPUT POWER 120 V |
90 VAC TO 135 VAC |
|
+5 VDC |
+4.75 VDC TO +5.25 VDC |
|
+24 VDC |
+23.37 VDC TO +27.06 VDC |
Logic Voltage Levels
Measurements of logic levels must be made with reference to the specified DC Common, unless some other point is referenced in a diagnostic procedure.
|
Table 2 Logic Levels |
|
|
VOLTAGE |
H/L SPECIFICATIONS |
|
+5 VDC |
H= +3.00 TO +5.25 VDC |
|
L= 0.0 TO 0.8 VDC |
|
|
+24 VDC |
H= +23.37 TO +27.06 VDC |
|
L= 0.0 TO 0.8 VDC |
|
|
Reversion 4.0 |
January 2007 |
Introduction |
|
WorkCentre 7132 |
vii |
Introduction
Symbology and Nomenclature
WARNING
A Warning is used whenever an operating or maintenance procedure, a practice, condition, or statement, if not strictly observed, could result in personal injury.
DANGER: Une note DANGER est utilisée à chaque fois qu’une procédure de maintenance ou qu’une manipulation présente un risque de blessure si elle n’a pas été strictement observée.
WARNING
This machine contains an invisible laser. There is no visual indication that the laser beam is present. During servicing, the machine is a Class 3B product because of the invisible laser. the laser beam could cause eye damage if looked at directly. Service procedures must be followed exactly as written without change. The service representative must observe the established local laser safety precautions when servicing the machine. Do not place tools with a reflective surface in the area of the ROS opening. Do not look in the area of the ROS window if the power is On and the laser is energized.
DANGER: L’équipement contient un faisceau laser invisible et aucune indication visible signale la présence du faisceau laser. De ce fait le produit est classé 3B pour tout ce qui concerne la maintenance. L’exposition directe des yeux au faisceau laser peut entraîner des lésions visuelles. Les procédures de maintenance doivent être réalisées sans aucun changement comme indiqué dans la documentation. Le représentant Xerox lors d’interventions sur l’équipement doit respecter les consignes de sécurité locales concernant les faisceaux laser. Ne pas placer d’objet réfléchissant dans la zone du ROS quand il est ouvert. Ne pas regarder dans la zone du ROS lorsque la machine est sous tension et que le laser est en fonctionnement.
The following symbol and statement appear on a label in the machine. The symbol by itself, or the symbol and the statement may also appear in the service documentation and in the training program. When this symbol appears, the service representative is warned that conditions exist that could result in exposure to the laser beam.
DANGER: Les symboles et instructions suivants sont indiqués sur des étiquettes dans la machine et sont identifiés dans la documentation technique et dans le manuel de formation. Quand ces symboles s’affichent le représentant Xerox est prévenu des risques encourus concernant une exposition au rayon laser.
WARNING
nance ou reglage avec le cordon d’alimentation branche.
Paper Transportation
REP 2.1.1 Feeder 1 Assembly
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 2.3.1 Tray Feed/Nudger/Retard Roll
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 2.4.1 Registration Unit
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 2.5.1 Take Away Roll
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 2.6.2 Left Hand (L/H) Upper Cover Unit
WARNING
Do not try to bypass any laser interlocks for any reason. Permanent eye damage could result if the laser is accidentally directed into your eye.
DANGER: Ne pas essayer de shunter les contacts laser pour quelques raisons que ce soit. Si le faisceau laser est dirigé accidentellement vers les yeux il peut en résulter des lésions oculaires permanentes.
4 Repairs and Adjustments
Drives
REP 1.1.1 Main Drive Assembly
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer mainte-
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
ROS
REP 3.1.1 ROS Unit
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
Xerographics/Development
|
Reversion 4.0 |
January 2007 |
Introduction |
|
WorkCentre 7132 |
ix |
REP 4.1.1 Xero/Developer Cartridge
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 4.1.2 Toner Cartridge
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
Electrical Components
REP 9.1.1 MCU PWB
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 4.2.1 Dispense Motor
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 9.2.1 ESS PWB
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
Fuser
REP 5.1.1 Fuser Unit
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
Covers
REP 10.1.1 Top Cover Assembly
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
Exit
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 10.2.1 Rear Lower Cover
REP 6.1.1 Exit 2 +OCT 2
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
MPT
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
IIT
REP 11.1.1 Platen Cushion
REP 7.1.1 MPT Assembly
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 11.1.2 Control Panel
|
REP 7.2.1 MPT Feed Roll/Retard Pad |
WARNING |
|
|
Introduction |
January 2007 |
Reversion 4.0 |
|
x |
WorkCentre 7132 |
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 11.3.1 Platen Glass
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 11.3.2 IIT/IPS PWB
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 11.4.1 Lens Kit Assembly
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 11.5.1 Carriage Cable
REP 11.6.2 Lamp Wire Harness
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
Tray Module -2T
REP 12.1.1 Tray 3 Feeder
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 12.1.2 Tray 3 Feeder (2TM)
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 12.3.1 Feed/Retard/Nudger Roll
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 11.5.2 Carriage Motor
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 12.6.1 2 Tray Module PWB
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 11.6.1 Exposure Lamp
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
Tray Module -TT
REP 13.1.1 Tray 3 Assembly
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 13.1.2 Tray 2 Assembly (2TTM)
|
Reversion 4.0 |
January 2007 |
Introduction |
|
WorkCentre 7132 |
xi |
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 13.3.1 Front/Rear Tray Cable
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 13.4.1 Tray 3 Feeder (TTM)
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 13.5.1 Tray 3 Feeder
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 13.6.1 Feed/Retard/Nudger Roll
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 13.8.1 Twin Tray Module PWB
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
DADF
REP 15.1.1 DADF Assembly
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 15.1.2 DADF Platen Cushion
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 15.2.1 DADF Document Tray
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 15.2.2 DADF Feeder Assembly
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 15.2.3 DADF Front Cover
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 15.2.4 DADF Rear Cover
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 15.3.1 DADF PWB
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 15.3.2 Left Counter Balance
|
Introduction |
January 2007 |
Reversion 4.0 |
|
xii |
WorkCentre 7132 |
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 15.3.3 Right Counter Balance
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 15.4.1 Retard Roll
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 15.4.2 Top Cover
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 15.6.1 Nudger Roll, Feed Roll
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 15.8.1 Registration Roll
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
Finisher
REP 16.1.1 H-Transport Assembly
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 16.3.1 H-Transport Belt
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 16.1.2 Finisher Assembly
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 16.4.1 Front Cover
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 16.4.2 Rear Cover
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 16.5.1 Stack Height Sensor Assembly
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 16.5.2 Eject Roll Assembly
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 16.6.1 Decurler Roll
|
Reversion 4.0 |
January 2007 |
Introduction |
|
WorkCentre 7132 |
xiii |
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 16.6.2 Finisher Drive Motor
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 16.7.1 Belt
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 16.8.1 Rail
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 16.8.2 Staple Assembly
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 16.9.1 Compiler Tray Assembly
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 16.10.1 Stacker Motor Assembly
nance ou reglage avec le cordon d’alimentation branche.
REP 16.10.2 Elevator Belt Assembly
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 16.11.1 Paddle Gear Shaft
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
REP 16.12.1 Finisher PWB
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
IIT
ADJ 11.6.1 Full/Half Rate carriage Position Adjustment
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer maintenance ou reglage avec le cordon d’alimentation branche.
8 Options and Accessories
8.1 FAX KIT
WARNING
Switch off the machine and disconnect the power cord.
DANGER: Mettre la machine sur ARRET et debrancher le cordon dalimentation.
8.2 Foreign Interface
WARNING
Switch off the machine and disconnect the power cord.
DANGER: Mettre la machine sur ARRET et debrancher le cordon dalimentation.
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical power applied to the machine.
DANGER: Afin d’eviter des blessures ou des chocs electriques, ne pas effectuer mainte-
|
Introduction |
January 2007 |
|
xiv |
Reversion 4.0
WorkCentre 7132
1 Service Call Procedures
|
Service Call Procedures…………………………………………………………………………………….. |
1-3 |
|
Initial Actions ……………………………………………………………………………………………………. |
1-3 |
|
Call Flow …………………………………………………………………………………………………………. |
1-4 |
|
Detailed Maintenance Activities (HFSI)………………………………………………………………… |
1-6 |
|
Cleaning Procedures…………………………………………………………………………………………. |
1-7 |
|
Final Actions…………………………………………………………………………………………………….. |
1-7 |
|
Reversion 4.0 |
January 2007 |
Service Call Procedures |
|
WorkCentre 7132 |
1-1 |
Service Call Procedures
Service Strategy
The service strategy for the WorkCentre 7132 is to perform any High Frequency Service Item (HFSI) actions before attempting to repair any problems. Some problems will be corrected by this strategy without the need to diagnose them. The Repair Analysis Procedures (RAPs) will be used for any remaining problems.
Problems that occur in the Basic Printer mode will be repaired before problems that occur when using the accessories.
Image Quality problems should be repaired after all other problems are repaired.
Service Call Procedures
The Service Call Procedures are a guide for performing any service on this machine. The procedures are designed to be used with the Service Manual. Perform each step in order.
Initial Actions
The Initial Actions gather information about the condition of the machine and the problem that caused the service call.
Call Flow
Call Flow summarizes the sequence of the Service Call Procedures.
Detailed Maintenance Activities
Detailed Maintenance Activities section provides the information needed to perform the High Frequency Service Item (HFSI) actions.
Cleaning Procedures
The Cleaning Procedures list what needs to be cleaned at each service call.
Final Actions
The Final Actions will test the copier/printer and return it to the customer. Administrative activities are also performed in the Final Actions.
Initial Actions
Purpose
The purpose of the Initial Action section of the Service Call Procedures is to determine the reason for the service call and to identify and organize the actions which must be performed.
Procedure
1.Gather the information about the service call and the condition of the copier/printer.
a.Question the operator(s). Ask about the location of most recent paper jams. Ask about the image quality and the copier/printer performance in general, including any unusual sounds or other indications.
b.After informing the customer, disconnect the machine from the customer’s network.
c.Check that the power cords are in good condition, correctly plugged in the power source, and free from any defects that would be a safety hazard. Repair or replace the power cords as required. Check that the circuit breakers are not tripped.
d.Inspect any rejected copies. Inquire as to, or otherwise determine, the paper quality and weight, the specified paper for optimum Image Quality, 24# Xerox Color Expressions (NASG) or ColorTech+90gsm (ESG). Look for any damage to the copies, oil marks, image quality defects, or other indications of a problem.
e.Record the billing meter readings.
f.Access Diagnostic Routines.
i.Enter UI Diagnostics (Entering UI Diagnostics in UI Diagnostic Mode).
ii.Access Diagnostic Routines (Accessing Diagnostic Routines in UI Diagnostic Mode).
NOTE: If a fault code is displayed while performing a diagnostics procedure, go to that fault code RAP and repair the fault. Return to Diagnostics and continue with the dC procedure that you were performing.
g.Print the HFSI Report and determine what HFSI action is required based on the customer output volume. Refer to the Detailed Maintenance Activities section for the detailed HFSI information. Record any items that require action.
h.Display and record the information in the Jam Counter, Fault Counter, and Shutdown History. Classify this information into categories:
Information that is related to the problem that caused the service call.
Information that is related to secondary problems.
Information that does not require action, such as a single occurrence of a problem.
i.Check the Service Log for any recent activities that are related to the problem that caused the service call or any secondary problem.
2.Perform any required HFSI activities identified above. Refer to the Detailed Maintenance Activities section.
3.Exit diagnostics. Try to duplicate the problem by running the same jobs that the customer was running.
4.Check the Image Quality in the Basic Copier Mode. Select the tray that is loaded with 11 x 17 or A3 paper, if unable to complete tray selection, go to Call Flow.
Set the copier/printer to the following setup:
• Output Color — Auto
|
Reversion 4.0 |
January 2007 |
Service Call Procedures |
|
Service Call Procedures, Initial Actions |
||
|
WorkCentre 7132 |
1-3 |
•Original Type — Photo and Text Halftone
•R/E — Auto
•Lighter/Darker — Auto Contrast
•Sharpness — Normal
•Preset Color Balance — Normal
•Color Shift — Normal
•Color Saturation — Normal
•Copy Position — No Shift
•Variable Color Balance — Normal
Run four copies of the Color Test Pattern.
Check the Image Quality. If the customer has identified any Image Quality Defects or problems, go to IQ1 IOT Image Quality Entry RAP.
5.Go to Call Flow.
Call Flow
This procedure should be performed at every service call.
Initial Actions
Ask the operator about the problem. If the problem appears to be related to operator error, or an attempt to perform a job outside of the machine specifications, assist the customer in learning the correct procedure.
Procedure
If the machine does not power up, Go to Power On RAP.
Ask the operator about the problem.
•If the problem is identified by a fault code (including Paper/Document Jams), refer to Chapter 2 for the procedure and then proceed with servicing.
•If the problem is noise or smell, select a mode (1 Sided/2Sided, Finisher etc.), find the cause of the problem and proceed with servicing.
The operator operated the machine correctly.
YN
Explain to the operator how to operate the machine correctly.
The UI display is normal.
Y N
|
Go to OF 6 Dark/Blank Display. Refer to BSDs (CH2.1-CH2.4). |
|||||||||
|
The problem occurs only in Print mode. |
|||||||||
|
Y |
N |
||||||||
|
The problem occurs only in Copy mode. |
|||||||||
|
Y |
N |
||||||||
|
The problem occurs only in Fax mode. |
|||||||||
|
Y |
N |
||||||||
|
The problem is an accessory or the Foreign Accessory. |
|||||||||
|
Y |
N |
||||||||
|
Refer to Table 1 Other Faults and identify the problem and follow the cor- |
|||||||||
|
rective action. |
|||||||||
|
If the cause of the problem is an accessory or the Foreign Interface, check that |
|||||||||
|
the machine settings are correct, refer to the appropriate service manual for the |
|||||||||
|
procedure and then proceed with servicing. |
|||||||||
|
The problem occurs only in certain modes such as Broadcast transmission. |
|||||||||
|
Y |
N |
||||||||
|
Perform a transmission test with the call center or station. The problem reoc- |
|||||||||
|
curs. |
|||||||||
|
Y |
N |
||||||||
|
Ask the customer for permission to establish communications with |
|||||||||
|
the remote machine that is causing the problem. Perform a Send |
|||||||||
|
transmission test with the remote machine. Transmission was nor- |
|||||||||
|
mal. |
|||||||||
|
A |
B |
C |
D |
||||||
|
Service Call Procedures |
January 2007 |
Reversion 4.0 |
|||||||
|
Initial Actions, Call Flow |
|||||||||
|
1-4 |
WorkCentre 7132 |
A B C D
YN
Print the protocol trace to identify whether it is the remote machine or the machine that is causing the problem.
•If the problem lies in the machine:
Analyze the protocol trace, refer to Chapter 2 and then proceed with servicing.
•If the problem appears to lie in the remote machine:
Ask the customer to check the status of the remote machine.
There is a problem with Receive transmission test. Perform Receive transmission tests with other stations within the company. Check that there is no problem with the machine and then ask the customer to check the status of the remote machine.
Analyze the protocol trace, refer to Chapter 2 and then proceed with servicing.
Check the machine settings and if necessary, ask the customer for permission to test the machine in the mode in which the problem occurs.
Analyze the protocol trace when the problem reoccurs, refer to Chapter 2 and then proceed with servicing.
There is an image quality problem.
YN
If there is an alignment problem, obtain separate Platen/DADF output samples, refer to Chapter 4 Adjustments and then proceed with servicing.
Refer to Chapter 3 IQ1 IOT Image Quality Entry RAP and then proceed with servicing.
There is a problem with the network.
YN
There is a problem with the USB connection. Y N
There is an image quality problem. Y N
The problem lies in a certain Client PC. Y N
There is a problem with a certain application or programming language A. Obtain the latest information on restrictions and technical information. Proceed accordingly.
Check the settings of that particular Client PC and if necessary ask the user to reinstall the printer driver.
Refer to IQ1 IOT Image Quality Entry RAP and then proceed with servicing. If the problem persists, ask the user to reinstall the printer driver.
Check the machine settings and if necessary ask the user to reinstall the printer driver.
E
If the problem continues, replace the network cable. If the problem persists, replace the USB cable. Check the machine settings and discuss the problem with the customer’s network administrator.
|
Table 1 Other Faults |
|
|
Problem |
Corrective Action |
|
Duplexing is not available as a |
Ensure the Duplex electrical connector is secure (PL |
|
selection on the display. |
10.1) |
|
Copies jam in the Finisher when |
Verify condition of paper. If good, check that part |
|
the output tray is near maximum |
655N128 can be used to support tray. |
|
capacity. |
|
|
ADF inoperative after PWB |
Reload Software ADJ 9.3.1. |
|
replacement. |
|
|
Can not make copies when |
Enter UI Diagnostic Mode. Select Copy on screen. |
|
Auditron is enabled. |
Machine will operate without auditron restriction. |
|
Loud snapping noise is heard. |
Enter Component Control [042-003] and press the Start |
|
button. If noise is present there is binding in toner auger |
|
|
drive system. Repair as required (PL 1.2) |
|
|
Sets are not offset in Center Tray. |
Perform Center Tray Offsetting. |
|
E-mail icon not visible in display on |
Perform E-Mail Icon. |
|
email enabled machine. |
|
|
Customer wishes to distinguish |
Perform FAX Output Separation. |
|
FAX output from prints or copies. |
|
E
|
Reversion 4.0 |
January 2007 |
Service Call Procedures |
|
Call Flow |
||
|
WorkCentre 7132 |
1-5 |
Detailed Maintenance Activities (HFSI)
Procedure
1.Access Diagnostic Routines.
a.Enter UI Diagnostics (Entering UI Diagnostics in UI Diagnostic Mode).
b.Access Diagnostic Routines (Accessing Diagnostic Routines in UI Diagnostic Mode).
2.Select NVM Read/Write.
3.Refer to Table 1 and enter a counter number for any High Frequency Service Item (HFSI) counters to be checked. Use the customer’s output volume numbers to help determine which HFSI components should be serviced. Consider components near threshold as candidates for service.
4.Refer to Cleaning Procedures for detailed cleaning instructions.
Table 1 High Frequency Service Items
|
Counter |
Name |
Threshold |
Service Action to be performed |
|
954-800 |
Tray 1 Feed counter |
300K |
Replace the Feed Roll, Retard Roll, Nudger |
|
Roll. |
|||
|
954-801 |
Tray 2 Feed counter |
300K |
Replace the Feed Roll, Retard Roll, Nudger |
|
Roll. |
|||
|
954-802 |
Tray 3 Feed counter |
300K |
Replace the Feed Roll, Retard Roll, Nudger |
|
Roll. |
|||
|
954-803 |
MSI Feed counter |
50K |
Replace the Feed Roll, Retard Pad. |
|
954-824 |
IBT Belt counter |
480K |
Replace the IBT Assembly. |
|
954-825 |
IBT Cleaner counter |
100K |
Replace the IBT Cleaner. |
|
954-826 |
2nd BTR Counter |
300K |
Replace the Bias Transfer Roll. |
|
954-830 |
K Developer Counter |
420K |
Replace the K Developer. |
|
954-831 |
Y Developer Counter |
420K |
Replace the Y Developer. |
|
954-832 |
M Developer Counter |
420K |
Replace the M Developer. |
|
954-833 |
C Developer Counter |
420K |
Replace the C Developer. |
|
954-837 |
Xero Drum Counter |
10M |
Replace the Xero Drum Assembly. |
|
954-842 |
Fuser Counter |
10M |
Replace the Fuser Assembly. |
|
956-802 |
Lamp Scan Counter |
6000K |
Replace the Exposure Lamp. |
|
956-803 |
Exposure Lamp Time |
7200K |
Replace the Exposure Lamp. |
|
Counter |
|||
|
956-804 |
Exposure Lamp On |
6000K |
Replace the Exposure Lamp. |
|
Counter |
|||
|
955-806 |
CVT Feed Counter |
200K |
Replace the Document Nudger Roll, Feed |
|
Roll, Retard Roll, Registration Roll. |
|||
|
955-807 |
Simplex Feed Counter |
912K |
Replace the Document Nudger Roll, Feed |
|
Roll, Retard Roll, Registration Roll. |
|||
|
955-808 |
Duplex Feed Counter |
912K |
Replace the Document Nudger Roll, Feed |
|
Roll, Retard Roll, Registration Roll. |
|||
|
955-810 |
Platen Interlock |
260K |
Replace the Platen Interlock Switch. |
|
Counter |
|||
Table 1 High Frequency Service Items
|
Counter |
Name |
Threshold |
Service Action to be performed |
|
955-829 |
Inverter Solenoid On |
500K |
Replace the Inverter Solenoid. |
|
Counter |
|||
|
Service Call Procedures |
January 2007 |
Reversion 4.0 |
|
Detailed Maintenance Activities |
||
|
1-6 |
WorkCentre 7132 |
Cleaning Procedures
Purpose
To provide cleaning procedures to be performed at every service call.
Procedure
CAUTION
Do not use any solvents unless directed to do so by the Service Manual.
General Cleaning
Use a dry lint free cloth or a lint free cloth moistened with water for all cleaning unless directed otherwise by the Service Manual. Wipe with a dry lint free cloth if a moistened cloth is used.
1.Feed Components (Rolls and Pads)
Follow the General Cleaning procedure above.
2.Toner Dispense Units
Vacuum the Toner Dispense units.
3.Jam Sensors
Clean the sensors with a dry cotton swab.
4.Scanner
a.Switch off the power and allow the Exposure Lamp to cool off.
b.Using the optical Cleaning Cloth, clean the front and rear of the Document Glass, Document Cover, White Reference Strip, Reflector, and Mirror.
c.Clean the Exposure Lamp with a clean cloth and Film Remover.
d.Clean the Lens with Lens and Mirror Cleaner and lint free cloth.
5.DADF
Check the paper path for debris or damage. Clean the rolls with a clean cloth and Film Remover as required.
6.Document Glass and Constant Velocity Transport Glass
Follow the General Cleaning procedure above.
7.ROS Window
Remove and reinstall the ROS CLeaning Wand.
8.IBT Belt
Check the Transfer Belt System and wipe with a dry lint free cloth. If the surface is excessively dirty, replace the IBT Belt (PL 6.2)
NOTE: Do not rub the IBT CLeaning Blade. If it is necessary to clean the blade, use a soft brush or dry swab to remove any contamination. Rubbing the blade will remove the protective coating.
9.Finisher
Check the paper path for debris or damage. Clean the Finisher with a dry lint free cloth.
Final Actions
Purpose
To provide a guide for procedures to be done at the end of every service call.
Procedure
1.Ensure that the exterior of the copier/printer and the adjacent area are clean. Use a dry cloth or a cloth moistened with water to clean the copier/printer. Do not use solvents.
2.Check the supply of consumables. Ensure that an adequate supply of consumables is available according to local operating procedures.
3.Complete the Service Log.
4.Perform the following steps to make a copy of the Demonstration Original for the customer:
a.Load Tray 1 with 8.5 x 11 inch (A4) or 11 x 17 inch paper.
b.Place the Color Test Pattern on the glass with the short edge of the test pattern registered to the left edge of the glass. Select Tray 1 and make a single copy.
c.Print out the Machine Settings (Configuration Report). Store this report with the service log in the Inner Cover.
d.Ask the customer to verify the Print and Scan functions.
e.Present the copies to the customer.
5.Reconnect the machine to the customer network. Verify the function.
6.Issue copy credits as needed.
7.Discuss the service call with the customer to ensure that the customer understands what has been done and is satisfied with the results of the service call.
|
Reversion 4.0 |
January 2007 |
Service Call Procedures |
|
Cleaning Procedures, Final Actions |
||
|
WorkCentre 7132 |
1-7 |
001 Power RAP
|
Power On RAP…………………………………………………………………………………………………. |
2-17 |
002 HDD
|
002-770 Job Template Processing — HDD Full RAP ………………………………………………. |
2-19 |
003 IPS-ESS Communication
|
003-318 IIT Software RAP …………………………………………………………………………………. |
2-21 |
|
003-319 IIT Video Driver Detection RAP ……………………………………………………………… |
2-21 |
|
003-320 IISS-ESS Communication 1 RAP …………………………………………………………… |
2-22 |
|
003-321 IISS-ESS Communication 2 RAP …………………………………………………………… |
2-22 |
|
003-322 IISS-ESS Communication 3 RAP …………………………………………………………… |
2-23 |
|
003-323 IISS-ESS Communication 4 RAP …………………………………………………………… |
2-23 |
|
003-324 IISS-ESS Communication 5 RAP …………………………………………………………… |
2-24 |
|
003-325 IISS-ESS Communication 6 RAP …………………………………………………………… |
2-24 |
|
003-326 IISS-ESS Communication 7 RAP …………………………………………………………… |
2-25 |
|
003-327 IISS-ESS Communication 8 RAP …………………………………………………………… |
2-25 |
|
003-328 IISS-ESS Communication 9 RAP …………………………………………………………… |
2-26 |
|
003-329 IISS-ESS Communication 10 RAP …………………………………………………………. |
2-26 |
|
003-330 IISS-ESS Communication 11 RAP …………………………………………………………. |
2-27 |
|
003-331 IISS-ESS Communication 12 RAP …………………………………………………………. |
2-27 |
|
003-332 IISS-ESS Communication 13 RAP …………………………………………………………. |
2-28 |
|
003-333 IISS-ESS Communication 14 RAP …………………………………………………………. |
2-28 |
|
003-334 IISS-ESS Communication 15 RAP …………………………………………………………. |
2-29 |
|
003-335 IISS-ESS Communication 16 RAP …………………………………………………………. |
2-29 |
|
003-336 IISS-ESS Communication 17 RAP …………………………………………………………. |
2-30 |
|
003-337 IISS-ESS Communication 18 RAP …………………………………………………………. |
2-30 |
|
003-338 IISS-ESS Communication 19 RAP …………………………………………………………. |
2-31 |
|
003-339 IISS-ESS Communication 20 RAP …………………………………………………………. |
2-31 |
|
003-340 IISS-ESS Communication 21 RAP …………………………………………………………. |
2-32 |
|
003-341 IISS-ESS Communication 22 RAP …………………………………………………………. |
2-32 |
|
003-342 IISS-ESS Communication 23 RAP …………………………………………………………. |
2-33 |
|
003-343 IISS-ESS Communication 24 RAP …………………………………………………………. |
2-33 |
|
003-344 Hotline Power On…………………………………………………………………………………. |
2-34 |
|
003-345 PIO Unlatched 1 RAP …………………………………………………………………………… |
2-34 |
|
003-346 PIO Unlatched 2 RAP …………………………………………………………………………… |
2-35 |
|
003-750 Book Duplex Documents RAP ……………………………………………………………….. |
2-35 |
|
003-751 Panther Capacity RAP ………………………………………………………………………….. |
2-36 |
|
003-754 S2X Recovery RAP………………………………………………………………………………. |
2-36 |
|
003-755 S2X Command Error RAP …………………………………………………………………….. |
2-37 |
|
003-756 Blank Originals RAP …………………………………………………………………………….. |
2-37 |
|
003-760 Scan Settings RAP ………………………………………………………………………………. |
2-38 |
|
003-761 Incorrect Paper Tray Size RAP………………………………………………………………. |
2-38 |
|
003-763 Adjustment Chart RAP………………………………………………………………………….. |
2-39 |
|
003-764 Image Overlay RAP ……………………………………………………………………………… |
2-39 |
|
003-780 Scanned Image Compression RAP ………………………………………………………… |
2-40 |
|
003-795 AMS Limit RAP ……………………………………………………………………………………. |
2-40 |
|
003-930 300 DPI Scan RAP ………………………………………………………………………………. |
2-41 |
2 Status Indicator RAPs |
|
|
003-931 400 DPI Scan RAP……………………………………………………………………………….. |
2-41 |
|
003-932 600 DPI Scan RAP……………………………………………………………………………….. |
2-42 |
|
003-933 300 DPI Scan RAP……………………………………………………………………………….. |
2-42 |
|
003-934 400 DPI Scan RAP……………………………………………………………………………….. |
2-43 |
|
003-935 600 DPI Scan RAP……………………………………………………………………………….. |
2-43 |
|
003-940 Memory RAP……………………………………………………………………………………….. |
2-44 |
|
003-942 Document Size Auto Detect RAP……………………………………………………………. |
2-44 |
|
003-944 Image Repeat Count RAP……………………………………………………………………… |
2-45 |
|
003-946 Image Rotation (Copy APS) RAP …………………………………………………………… |
2-45 |
|
003-947 Return Documents Count RAP ………………………………………………………………. |
2-46 |
|
003-948 Return Documents Mismatch RAP …………………………………………………………. |
2-46 |
|
003-952 Document Color Mismatch RAP …………………………………………………………….. |
2-47 |
|
003-955 Documents Size Exchange RAP…………………………………………………………….. |
2-47 |
|
003-956 Coping from the Platen Failure RAP ……………………………………………………….. |
2-48 |
|
003-963 APS Object Tray RAP…………………………………………………………………………… |
2-48 |
|
003-965 ATS/APS Paper Detect RAP………………………………………………………………….. |
2-49 |
|
003-966 ATS/APS Destination (IIT) RAP……………………………………………………………… |
2-49 |
|
003-970 Fax Line Memory RAP………………………………………………………………………….. |
2-50 |
|
003-972 Maximum Stored Page RAP ………………………………………………………………….. |
2-50 |
|
003-973 Image Rotation RAP …………………………………………………………………………….. |
2-51 |
|
003-974 Next Original Specification RAP……………………………………………………………… |
2-51 |
|
003-976 FAX Line Memory Overflow RAP……………………………………………………………. |
2-52 |
|
003-977 Document Mismatch (Multiple Scan) RAP ……………………………………………….. |
2-52 |
|
003-978 Color Document Miss Match (Multi Scan) RAP ………………………………………… |
2-53 |
|
003-980 Staple Position RAP……………………………………………………………………………… |
2-53 |
|
003-981 Staple Size RAP…………………………………………………………………………………… |
2-54 |
|
003-982 IIT HDD Access Error RAP ……………………………………………………………………. |
2-54 |
|
005 DADF |
|
|
005-110 Belt DADF Regi Sensor On Dynamic Jam RAP ……………………………………….. |
2-55 |
|
005-111 Belt DADF Regi Sensor Off Dynamic Jam RAP ……………………………………….. |
2-55 |
|
005-112 Belt DADF Regi Sensor On Dynamic Jam RAP (Document Reverse) …………. |
2-56 |
|
005-113 Belt DADF Regi Sensor Off Dynamic Jam RAP (Document Reverse) …………. |
2-56 |
|
005-115 Belt DADF Exit Sensor On Dynamic Jam ………………………………………………… |
2-57 |
|
005-116 Belt DADF Exit Sensor Off Dynamic Jam ………………………………………………… |
2-57 |
|
005-121 CVT Feed Sensor On Jam RAP …………………………………………………………….. |
2-58 |
|
005-122 CVT Simplex/Side1 Pre-Registration On Jam RAP …………………………………… |
2-59 |
|
005-123 CVT Simplex/Side1 Registration Jam RAP………………………………………………. |
2-60 |
|
005-124 CVT Lead Reg Sensor On Jam ……………………………………………………………… |
2-61 |
|
005-125 CVT Registration Sensor Off Jam RAP …………………………………………………… |
2-61 |
|
005-126 CVT Out Sensor On Jam ………………………………………………………………………. |
2-62 |
|
005-127 CVT Out Sensor Off Jam ………………………………………………………………………. |
2-63 |
|
005-128 CVT Simplex Exit 1 Sensor On Jam ……………………………………………………….. |
2-63 |
|
005-129 CVT Simplex Exit 1 Sensor Off Jam ……………………………………………………….. |
2-64 |
|
005-130 CVT Invert Sensor On Jam……………………………………………………………………. |
2-64 |
|
005-131 CVT Invert On Jam RAP ……………………………………………………………………….. |
2-65 |
|
005-132 CVT Invert On Jam 2 RAP …………………………………………………………………….. |
2-66 |
|
005-133 CVT Invert Sensor Off Jam……………………………………………………………………. |
2-67 |
|
Revision |
January 2007 |
Status-indicator-raps |
|
WorkCentre 7132 |
2-1 |
|
005-134 CVT Invert Sensor Off Jam (Inverter) RAP………………………………………………. |
2-67 |
|
005-135 CVT Side2 Pre-Registration On Jam RAP……………………………………………….. |
2-68 |
|
005-136 CVT Side2 Registration On Jam RAP …………………………………………………….. |
2-69 |
|
005-137 CVT Exit 2 Sensor On Jam……………………………………………………………………. |
2-70 |
|
005-138 CVT Exit 1 Sensor On Jam (Side 2) ……………………………………………………….. |
2-71 |
|
005-139 CVT Invert Sensor Off Jam RAP ……………………………………………………………. |
2-71 |
|
005-141 CVT Feed Sensor Off Jam…………………………………………………………………….. |
2-72 |
|
005-142 CVT Exit 1 Sensor Off Jam (Side 2) ……………………………………………………….. |
2-73 |
|
005-143 CVT Exit 2 Sensor Off Jam……………………………………………………………………. |
2-73 |
|
005-144 CVT Pre Reg Sensor Jam …………………………………………………………………….. |
2-74 |
|
005-145 CVT Registration Sensor Off Jam (Invert) RAP………………………………………… |
2-74 |
|
005-146 CVT Pre Registration Sensor Off Jam RAP……………………………………………… |
2-75 |
|
005-147 CVT Pre Registration Sensor Off Jam (Invert) RAP ………………………………….. |
2-76 |
|
005-150 CVT Holed Paper Feed Sensor Off Jam………………………………………………….. |
2-77 |
|
005-151 CVT Holed Paper Pre Reg Sensor Off Jam……………………………………………… |
2-78 |
|
005-152 CVT Holed Paper Reg Sensor Off Jam …………………………………………………… |
2-78 |
|
005-153 CVT Holed Paper Pre Reg Sensor Off Jam……………………………………………… |
2-79 |
|
005-154 CVT Holed Paper Out Sensor Off Jam ……………………………………………………. |
2-79 |
|
005-155 CVT Holed Paper Simplex Exit 1 Sensor Off Jam …………………………………….. |
2-80 |
|
005-156 CVT Holed Paper Duplex Exit 1 Sensor Off Jam………………………………………. |
2-80 |
|
005-157 CVT Holed Paper Invert Sensor Off Jam…………………………………………………. |
2-81 |
|
005-158 CVT Holed Paper Exit 2 Sensor Off Jam…………………………………………………. |
2-81 |
|
005-160 DADF Tray Lift Up Fail on running (Document Set)…………………………………… |
2-82 |
|
005-190 Feed Motor Logic Error Jam ………………………………………………………………….. |
2-82 |
|
005-194 Mixed Size Mismatch RAP…………………………………………………………………….. |
2-83 |
|
005-195 Size Mismatch Jam………………………………………………………………………………. |
2-84 |
|
005-196 CVT Size Mismatch RAP ………………………………………………………………………. |
2-84 |
|
005-197 Prohibit Combine Size RAP …………………………………………………………………… |
2-85 |
|
005-198 Document Length RAP …………………………………………………………………………. |
2-86 |
|
005-199 Document Length RAP …………………………………………………………………………. |
2-87 |
|
005-210 DADF Download Fail ……………………………………………………………………………. |
2-88 |
|
005-274 Original Size Sensor Fail ………………………………………………………………………. |
2-89 |
|
005-275 DADF RAM Failure RAP……………………………………………………………………….. |
2-89 |
|
005-280 DADF EEPROM RAP …………………………………………………………………………… |
2-90 |
|
005-281 DADF Tray Lift Down Failure …………………………………………………………………. |
2-90 |
|
005-282 DADF Tray Lift Up Failure……………………………………………………………………… |
2-91 |
|
005-283 DADF Nudger Sensor RAP……………………………………………………………………. |
2-91 |
|
005-284 DADF APS Sensor Logic RAP……………………………………………………………….. |
2-92 |
|
005-285 DADF Nudger Lift Up RAP…………………………………………………………………….. |
2-93 |
|
005-286 DADF Feed Out Sensor RAP ………………………………………………………………… |
2-94 |
|
005-301 DADF Top Cover Open…………………………………………………………………………. |
2-95 |
|
005-302 CVT Feeder Cover Interlock Open RAP ………………………………………………….. |
2-96 |
|
005-304 CVT Platen Interlock Open RAP…………………………………………………………….. |
2-96 |
|
005-305 CVT Feeder Cover Interlock Open (running) RAP…………………………………….. |
2-97 |
|
005-306 Tray Interlock Open while Running…………………………………………………………. |
2-97 |
|
005-307 CVT Platen Interlock Open on Running RAP …………………………………………… |
2-98 |
|
005-906 CVT Feed Sensor RAP…………………………………………………………………………. |
2-98 |
|
005-907 CVT Pre-Registration Sensor RAP …………………………………………………………. |
2-99 |
|
005-908 CVT Registration Sensor RAP……………………………………………………………….. |
2-99 |
|
005-309 Left Hand Interlock Open while Running …………………………………………………. |
2-100 |
|
005-900 No Belt DADF Applicable Sensor Static Jam……………………………………………. |
2-100 |
|
005-901 Belt DADF Doc Sensor Static Jam …………………………………………………………. |
2-101 |
|
005-902 Belt DADF Regi Sensor Static Jam…………………………………………………………. |
2-101 |
|
|
005-903 Belt DADF Exit Sensor Static Jam………………………………………………………….. |
2-102 |
|
|
005-904 Belt Dup Sensor Static Jam …………………………………………………………………… |
2-102 |
|
|
005-909 DADF Lead Sensor Static Jam ………………………………………………………………. |
2-103 |
|
|
005-910 DADF Out Sensor Static Jam ………………………………………………………………… |
2-103 |
|
|
005-911 DADF Exit 1 Sensor Static Jam ……………………………………………………………… |
2-104 |
|
|
005-912 DADF Exit 2 Sensor Static Jam ……………………………………………………………… |
2-104 |
|
|
005-913 CVT Invert Sensor RAP ………………………………………………………………………… |
2-105 |
|
|
005-914 DADF APS1, 2, 3, Sensor Static Jam……………………………………………………… |
2-105 |
|
|
005-915 CVT APS No1 Sensor RAP …………………………………………………………………… |
2-106 |
|
|
005-916 CVT APS No2 Sensor RAP …………………………………………………………………… |
2-106 |
|
|
005-917 CVT APS No3 Sensor RAP …………………………………………………………………… |
2-107 |
|
|
005-918 CVT Invert Sensor Static Jam………………………………………………………………… |
2-107 |
|
|
005-919 |
DADF Tray Lift Up Failure not during Job ………………………………………………… |
2-108 |
|
005-940 |
DADF No Original Failure ……………………………………………………………………… |
2-108 |
|
005-941 |
DADF Not Enough Documents Failure ……………………………………………………. |
2-109 |
|
005-942 Document Loading RAP………………………………………………………………………… |
2-109 |
|
|
005-943 |
DADF Tray Lift Up RAP ………………………………………………………………………… |
2-110 |
010 Fuser
|
010-311 Fuser Rear Thermistor Disconnected RAP………………………………………………. |
2-113 |
|
|
010-313 Control (Center) Thermistor RAP……………………………………………………………. |
2-114 |
|
|
010-314 Rear Thermistor RAP……………………………………………………………………………. |
2-114 |
|
|
010-318 Hot-Sagging Recovery RAP…………………………………………………………………… |
2-115 |
|
|
010-319 Fuser Center Thermistor Differential Amp RAP ………………………………………… |
2-115 |
|
|
010-320 Heat Roll Over Temperature RAP…………………………………………………………… |
2-116 |
|
|
010-327 Fuser On Time RAP……………………………………………………………………………… |
2-117 |
|
|
010-328 Fuser Warm-up Time RAP…………………………………………………………………….. |
2-118 |
|
|
010-330 Fuser Motor Failure RAP ………………………………………………………………………. |
2-119 |
|
|
010-331 Fuser Rear Thermistor Over Temp RAP………………………………………………….. |
2-119 |
|
|
010-332 Fuser Center Thermistor Disconnected RAP……………………………………………. |
2-120 |
|
|
010-333 Fuser Center Thermistor Overtemp RAP…………………………………………………. |
2-121 |
|
|
010-334 Fuser Center Thermistor Broken RAP …………………………………………………….. |
2-122 |
|
|
010-335 Fuser Center Thermistor Out of Range RAP ……………………………………………. |
2-123 |
|
|
010-336 |
Sub Lamp Disconnection Failure RAP…………………………………………………….. |
2-124 |
|
010-398 |
Fuser Lock RAP…………………………………………………………………………………… |
2-125 |
|
010-420 |
Fuser Near end of life RAP ……………………………………………………………………. |
2-126 |
|
010-421 |
Fuser end of life RAP……………………………………………………………………………. |
2-126 |
012 Finisher
|
012-111 Finisher H-Transport Entrance Sensor Off Jam RAP ………………………………… |
2-127 |
|
|
012-112 Finisher H-Transport Entrance Sensor On Jam RAP ………………………………… |
2-128 |
|
|
012-121 H-Transport Exit Sensor Off Jam RAP…………………………………………………….. |
2-129 |
|
|
012-126 H-Transport Entrance Sensor OFF Jam B RAP ……………………………………….. |
2-130 |
|
|
012-151 Compile Entrance Sensor Off Jam RAP ………………………………………………….. |
2-131 |
|
|
012-152 |
Compile Entrance Sensor On Jam RAP ………………………………………………….. |
2-132 |
|
012-161 |
Finisher Set Eject Jam RAP…………………………………………………………………… |
2-133 |
|
012-162 H-Tra EXIT Sensor On Jam RAP……………………………………………………………. |
2-134 |
|
|
012-211 |
Stacker Tray RAP ………………………………………………………………………………… |
2-135 |
|
012-212 |
Stacker Tray Upper Limit RAP ……………………………………………………………….. |
2-136 |
|
012-221 Front Tamper Home Sensor On RAP ……………………………………………………… |
2-137 |
|
|
012-223 Front Tamper Home Sensor Off RAP ……………………………………………………… |
2-138 |
|
Status-indicator-raps |
January 2007 |
Revision |
|
2-2 |
WorkCentre 7132 |
|
012-224 Rear Tamper Home Sensor Off RAP………………………………………………………. |
2-139 |
|
012-260 Eject Clamp Home Sensor ON RAP……………………………………………………….. |
2-140 |
|
012-263 Rear Tamper Home Sensor ON RAP ……………………………………………………… |
2-141 |
|
012-282 Eject Clamp Home Sensor Off RAP ……………………………………………………….. |
2-142 |
|
012-283 Set Clamp Home Sensor On RAP ………………………………………………………….. |
2-143 |
|
012-284 Set Clamp Home Sensor Off RAP ………………………………………………………….. |
2-144 |
|
012-285 Finisher Error ………………………………………………………………………………………. |
2-145 |
|
012-291 Stapler RAP ………………………………………………………………………………………… |
2-145 |
|
012-293 Staple Front Corner Sensor On RAP………………………………………………………. |
2-146 |
|
012-294 Staple Front Corner Sensor Off RAP………………………………………………………. |
2-147 |
|
012-295 Staple Move Sensor On RAP ………………………………………………………………… |
2-148 |
|
012-296 Staple Move Sensor Off RAP ………………………………………………………………… |
2-149 |
|
012-301 Finisher Top Cover Open RAP ………………………………………………………………. |
2-150 |
|
012-302 Finisher Front Cover Open RAP …………………………………………………………….. |
2-151 |
|
012-303 Finisher H-Transport Cover Open RAP …………………………………………………… |
2-151 |
|
012-310 Front Tamper Home Sensor On Fail RAP ……………………………………………….. |
2-152 |
|
012-311 Front Tamper Home Sensor Off Fail RAP ……………………………………………….. |
2-153 |
|
012-312 Rear Tamper Home Sensor ON Fail RAP ……………………………………………….. |
2-154 |
|
012-313 Rear Tamper Home Sensor Off Fail RAP………………………………………………… |
2-155 |
|
012-314 Eject Clamp Home Sensor On Failure RAP …………………………………………….. |
2-156 |
|
012-315 Eject Clamp Home Sensor Off Failure RAP …………………………………………….. |
2-157 |
|
012-316 Stapler Failure RAP ……………………………………………………………………………… |
2-158 |
|
012-317 Stapler Feed Ready Failure RAP……………………………………………………………. |
2-159 |
|
012-318 Set Clamp Home Sensor On Failure RAP ……………………………………………….. |
2-159 |
|
012-319 Set Clamp Home Sensor Off Failure RAP ……………………………………………….. |
2-160 |
|
012-350 Finisher Communications Failure RAP ……………………………………………………. |
2-161 |
|
012-500 …………………………………………………………………………………………………………… |
2-162 |
|
012-600 Staple Mode Logic ……………………………………………………………………………….. |
2-163 |
|
012-901 Finisher H-Transport Entrance Sensor RAP…………………………………………….. |
2-163 |
|
012-902 H-Transport Exit Sensor RAP ………………………………………………………………… |
2-164 |
|
012-903 Paper Remains at Compiler Entrance Sensor RAP…………………………………… |
2-164 |
|
012-905 Compile Paper Sensor RAP ………………………………………………………………….. |
2-165 |
|
012-923 H-Transport Entrance Sensor B RAP ……………………………………………………… |
2-165 |
012 a-finisher
|
012-132 (A-Finisher) Ent Sensor ON Jam ……………………………………………………………. |
2-167 |
|
|
012-151 (A-Finisher) Compiler Exit Sensor OFF Jam ……………………………………………. |
2-168 |
|
|
012-152 (A-Finisher) Compiler Exit Sensor ON Jam ……………………………………………… |
2-169 |
|
|
012-161 (A-Finisher) Set Eject Jam …………………………………………………………………….. |
2-170 |
|
|
012-211 (A-Finisher) Stacker Tray Fail ………………………………………………………………… |
2-171 |
|
|
012-221 (A-Finisher) Front Tamper Home Sensor ON Fail …………………………………….. |
2-173 |
|
|
012-223 (A-Finisher) Front Tamper Home Sensor OFF Fail …………………………………… |
2-174 |
|
|
012-224 (A-Finisher) Rear Tamper Home Sensor OFF Fail ……………………………………. |
2-175 |
|
|
012-259 (A-Finisher) Eject Home Sensor ON Fail …………………………………………………. |
2-176 |
|
|
012-263 (A-Finisher) Rear Tamper Home Sensor ON Fail……………………………………… |
2-177 |
|
|
012-280 (A-Finisher) Eject Home Sensor OFF Fail ……………………………………………….. |
2-178 |
|
|
012-283 (A-Finisher) Set Clamp Home Sensor ON Fail …………………………………………. |
2-179 |
|
|
012-284 (A-Finisher) Set Clamp Home Sensor OFF Fail ……………………………………….. |
2-180 |
|
|
012-291 |
(A-Finisher) Stapler Fail ………………………………………………………………………… |
2-181 |
|
012-301 |
(A-Finisher) Top Cover Interlock OPEN…………………………………………………… |
2-182 |
|
012-302 |
(A-Finisher) Front Cover Interlock OPEN ………………………………………………… |
2-183 |
|
012-903 |
(A-Finisher) Paper Remains at Compiler Exit Sensor………………………………… |
2-183 |
|
012-935 (A-Finisher) Paper Remains at Ent Sensor………………………………………………. |
2-184 |
016 FAX Service
|
016-210 Software Option (HDD Error) RAP………………………………………………………….. |
2-185 |
|
016-211 Software Option (System Memory Low) RAP …………………………………………… |
2-185 |
|
016-212 Software Option (Page Memory Low) RAP………………………………………………. |
2-186 |
|
016-213 Software Option (Printer PWB) RAP……………………………………………………….. |
2-186 |
|
016-214 Serial Number Mismatch RAP ……………………………………………………………….. |
2-187 |
|
016-215 Software Option RAP……………………………………………………………………………. |
2-187 |
|
016-216 Software Option RAP……………………………………………………………………………. |
2-188 |
|
016-217 Software Option RAP……………………………………………………………………………. |
2-188 |
|
016-219 Software Option RAP……………………………………………………………………………. |
2-189 |
|
016-311 Scanner Install RAP ……………………………………………………………………………… |
2-189 |
|
016-315 IIT Interface RAP………………………………………………………………………………….. |
2-190 |
|
016-316 Page Memory Not Detected RAP …………………………………………………………… |
2-190 |
|
016-317 Page Memory ErrorStandard RAP………………………………………………………… |
2-191 |
|
016-318 Page Memory ErrorOption RAP……………………………………………………………. |
2-191 |
|
016-321 Fax Module RAP ………………………………………………………………………………….. |
2-192 |
|
016-322 JBA Account Full RAP ………………………………………………………………………….. |
2-192 |
|
016-323 B Formatter RAP………………………………………………………………………………….. |
2-193 |
|
016-450 SMB Host Name Duplicated RAP …………………………………………………………… |
2-193 |
|
016-454 DNS Dynamic Update RAP……………………………………………………………………. |
2-194 |
|
016-455 SMTP Server Time-out RAP………………………………………………………………….. |
2-194 |
|
016-456 SMTP time asynchronous RAP………………………………………………………………. |
2-195 |
|
016-461 TBD RAP…………………………………………………………………………………………….. |
2-195 |
|
016-500 DIMM RAP ………………………………………………………………………………………….. |
2-196 |
|
016-501 S2X RAP…………………………………………………………………………………………….. |
2-196 |
|
016-502 ROM Write RAP…………………………………………………………………………………… |
2-197 |
|
016-503 SMTP Redirector RAP ………………………………………………………………………….. |
2-197 |
|
016-504 Redirector POP Server RAP………………………………………………………………….. |
2-198 |
|
016-505 Redirector POP Authentication RAP……………………………………………………….. |
2-198 |
|
016-506 Image Log RAP……………………………………………………………………………………. |
2-199 |
|
016-507 Image Log Send RAP …………………………………………………………………………… |
2-199 |
|
016-508 Image Log RAP……………………………………………………………………………………. |
2-200 |
|
016-509 Image Log RAP……………………………………………………………………………………. |
2-200 |
|
016-510 Image Log RAP……………………………………………………………………………………. |
2-201 |
|
016-511 Image Log RAP……………………………………………………………………………………. |
2-201 |
|
016-512 Image Log RAP……………………………………………………………………………………. |
2-202 |
|
016-522 LDAP RAP ………………………………………………………………………………………….. |
2-202 |
|
016-523 LDAP RAP ………………………………………………………………………………………….. |
2-203 |
|
016-524 LDAP RAP ………………………………………………………………………………………….. |
2-203 |
|
016-525 LDAP RAP ………………………………………………………………………………………….. |
2-204 |
|
016-526 LDAP RAP ………………………………………………………………………………………….. |
2-204 |
|
016-527 LDAP RAP ………………………………………………………………………………………….. |
2-205 |
|
016-533 LDAP RAP ………………………………………………………………………………………….. |
2-205 |
|
016-534 LDAP RAP ………………………………………………………………………………………….. |
2-206 |
|
016-539 LDAP RAP ………………………………………………………………………………………….. |
2-206 |
|
016-539 LDAP RAP ………………………………………………………………………………………….. |
2-207 |
|
016-574 Host Name Error RAP…………………………………………………………………………… |
2-207 |
|
016-575 DNS Server Error in FTP RAP ……………………………………………………………….. |
2-208 |
|
016-576 Server Connection Error in FTP RAP ……………………………………………………… |
2-208 |
|
016-577 FTP Service RAP …………………………………………………………………………………. |
2-209 |
|
Revision |
January 2007 |
Status-indicator-raps |
|
WorkCentre 7132 |
2-3 |
|
016-578 Login/Password Error RAP ……………………………………………………………………. |
2-209 |
016-733 Destination Address RAP………………………………………………………………………. |
2-235 |
|
016-579 Scanning Picture Error RAP ………………………………………………………………….. |
2-210 |
016-734 Transmission Report RAP……………………………………………………………………… |
2-236 |
|
016-580 File Name Acquisition Failure RAP…………………………………………………………. |
2-210 |
016-735 Updating Job Template RAP………………………………………………………………….. |
2-236 |
|
016-581 File Name Suffix Limit Error RAP……………………………………………………………. |
2-211 |
016-736 Remote Directory Lock RAP ………………………………………………………………….. |
2-237 |
|
016-582 File Creation Failure RAP ……………………………………………………………………… |
2-211 |
016-737 Remote Directory Removal RAP…………………………………………………………….. |
2-237 |
|
016-583 Lock Folder Creation Failure RAP ………………………………………………………….. |
2-212 |
016-741 Downloading Mode RAP……………………………………………………………………….. |
2-238 |
|
016-584 Folder Creation Failure RAP………………………………………………………………….. |
2-212 |
016-742 TBD RAP…………………………………………………………………………………………….. |
2-238 |
|
016-585 File Delete Failure RAP ………………………………………………………………………… |
2-213 |
016-743 TBD RAP…………………………………………………………………………………………….. |
2-239 |
|
016-586 Lock Folder Delete Failure RAP …………………………………………………………….. |
2-213 |
016-744 TBD RAP…………………………………………………………………………………………….. |
2-239 |
|
016-587 Folder Delete Failure RAP …………………………………………………………………….. |
2-214 |
016-745 TBD RAP…………………………………………………………………………………………….. |
2-240 |
|
016-588 Data Write-in Failure RAP……………………………………………………………………… |
2-214 |
016-746 Unsupported PDF File RAP …………………………………………………………………… |
2-240 |
|
016-589 Data Read Failure RAP ………………………………………………………………………… |
2-215 |
016-747 Insufficient Memory………………………………………………………………………………. |
2-241 |
|
016-590 Data Reading Failure RAP…………………………………………………………………….. |
2-215 |
016-748 HDD Full RAP ……………………………………………………………………………………… |
2-241 |
|
016-591 Scan Filing Policy Injustice RAP …………………………………………………………….. |
2-216 |
016-749 Post Script Font RAP ……………………………………………………………………………. |
2-242 |
|
016-592 NEXTNAME.DAT file access error RAP ………………………………………………….. |
2-216 |
016-750 Print Job RAP………………………………………………………………………………………. |
2-242 |
|
016-593 Internal Scan Error RAP ……………………………………………………………………….. |
2-217 |
016-751 PDF RAP…………………………………………………………………………………………….. |
2-243 |
|
016-594 TYPE Command Failure RAP………………………………………………………………… |
2-217 |
016-752 PDF Memory Limit RAP ………………………………………………………………………… |
2-243 |
|
016-595 Port Command Failure RAP ………………………………………………………………….. |
2-218 |
016-753 PDF Password Mismatch RAP ………………………………………………………………. |
2-244 |
|
016-596 CDUP Command Failure RAP……………………………………………………………….. |
2-218 |
016-754 PDF LZW Not Installed RAP………………………………………………………………….. |
2-244 |
|
016-597 Same Name File Exists RAP …………………………………………………………………. |
2-219 |
016-755 PDF Print Prohibited RAP ……………………………………………………………………… |
2-245 |
|
016-600 Key Operator Authentication Locked RAP……………………………………………….. |
2-219 |
016-756 Auditron — Prohibit Service RAP……………………………………………………………… |
2-245 |
|
016-601 Illegal Access Detection RAP ………………………………………………………………… |
2-220 |
016-757 Auditron — Invalid User RAP …………………………………………………………………… |
2-246 |
|
016-701 ART EX Memory Expended RAP …………………………………………………………… |
2-220 |
016-758 Auditron — Disabled Function RAP ………………………………………………………….. |
2-246 |
|
016-702 Out of Page Buffer RAP………………………………………………………………………… |
2-221 |
016-759 Auditron — Reached Limit RAP ……………………………………………………………….. |
2-247 |
|
016-703 E-mail To Invalid Box RAP…………………………………………………………………….. |
2-221 |
016-760 PostScript Decompose RAP ………………………………………………………………….. |
2-247 |
|
016-704 Mailbox Full RAP …………………………………………………………………………………. |
2-222 |
016-761 FIFO Empty RAP …………………………………………………………………………………. |
2-248 |
|
016-705 Secure Print RAP…………………………………………………………………………………. |
2-222 |
016-762 Print Language RAP …………………………………………………………………………….. |
2-248 |
|
016-706 Maximum Users Exceeded RAP…………………………………………………………….. |
2-223 |
016-764 SMTP Server Connection RAP ………………………………………………………………. |
2-249 |
|
016-707 Sample Print RAP ………………………………………………………………………………… |
2-223 |
016-765 SMTP Server HDD Full RAP………………………………………………………………….. |
2-249 |
|
016-708 HDD Full Annotation/Watermark RAP …………………………………………………….. |
2-224 |
016-766 SMTP Server File System RAP ……………………………………………………………… |
2-250 |
|
016-709 ART EX Command RAP ……………………………………………………………………….. |
2-224 |
016-767 Invalid E-mail Address RAP …………………………………………………………………… |
2-250 |
|
016-710 Delayed Print RAP ……………………………………………………………………………….. |
2-225 |
016-768 Invalid Sender Address RAP………………………………………………………………….. |
2-251 |
|
016-711 E-mail Transmission Size Limit RAP ………………………………………………………. |
2-225 |
016-769 SMTP Server Unsupported DSN RAP…………………………………………………….. |
2-251 |
|
016-712 Panther Capacity (I-Formatted) RAP ………………………………………………………. |
2-226 |
016-770 FAX Function Cancelled RAP ………………………………………………………………… |
2-252 |
|
016-713 Security Box Password RAP………………………………………………………………….. |
2-226 |
016-771 JBIG Parameter RAP ……………………………………………………………………………. |
2-252 |
|
016-714 Security Box Enable RAP ……………………………………………………………………… |
2-227 |
016-772 JBIG Parameter RAP ……………………………………………………………………………. |
2-253 |
|
016-716 TIFF Data Overflow RAP ………………………………………………………………………. |
2-227 |
016-773 JBIG Parameter RAP ……………………………………………………………………………. |
2-253 |
|
016-717 Fax/iFax Send RAP ……………………………………………………………………………… |
2-228 |
016-774 JBIG Parameter RAP ……………………………………………………………………………. |
2-254 |
|
016-718 PCL6 Memory RAP………………………………………………………………………………. |
2-228 |
016-775 JBIG Parameter RAP ……………………………………………………………………………. |
2-254 |
|
016-719 Out of PCL Memory RAP………………………………………………………………………. |
2-229 |
016-776 JBIG Parameter RAP ……………………………………………………………………………. |
2-255 |
|
016-720 PCL Command RAP …………………………………………………………………………….. |
2-229 |
016-777 JBIG Parameter RAP ……………………………………………………………………………. |
2-255 |
|
016-721 Other Errors RAP…………………………………………………………………………………. |
2-230 |
016-778 JBIG Parameter RAP ……………………………………………………………………………. |
2-256 |
|
016-722 Staple Position RAP……………………………………………………………………………… |
2-230 |
016-779 Scanned Image Conversion Error RAP …………………………………………………… |
2-256 |
|
016-724 Staple Position RAP……………………………………………………………………………… |
2-231 |
016-780 Attached Document TIFF RAP……………………………………………………………….. |
2-257 |
|
016-725 B-Formatter Image RAP ……………………………………………………………………….. |
2-231 |
016-781 Scan Server Connect Error RAP…………………………………………………………….. |
2-257 |
|
016-726 PDL Auto Switch RAP…………………………………………………………………………… |
2-232 |
016-782 Scan Server Login Error RAP ………………………………………………………………… |
2-258 |
|
016-727 Printer Request ……………………………………………………………………………………. |
2-232 |
016-783 Invalid Server Path RAP ……………………………………………………………………….. |
2-258 |
|
016-728 TIFF Data Unsupported RAP…………………………………………………………………. |
2-233 |
016-784 Server Write Error RAP…………………………………………………………………………. |
2-259 |
|
016-729 TIFF Data Size RAP …………………………………………………………………………….. |
2-233 |
016-785 Server HD Full RAP ……………………………………………………………………………… |
2-259 |
|
016-730 ART Command Unsupported RAP …………………………………………………………. |
2-234 |
016-786 HD Full-Scan Write Error RAP ……………………………………………………………….. |
2-260 |
|
016-731 TIFF Data Invalid RAP ………………………………………………………………………….. |
2-234 |
016-787 Invalid Server IP ADD RAP……………………………………………………………………. |
2-260 |
|
016-732 Form Not Registered RAP …………………………………………………………………….. |
2-235 |
016-788 Retrieve to Browser RAP ………………………………………………………………………. |
2-261 |
|
Status-indicator-raps |
January 2007 |
Revision |
|
|
2-4 |
WorkCentre 7132 |
|
016-789 HD Full — Job Memory RAP……………………………………………………………………. |
2-261 |
018-768 LDAP RAP ………………………………………………………………………………………….. |
2-286 |
|
|
016-790 Stapling Cancelled RAP………………………………………………………………………… |
2-262 |
018-769 LDAP RAP ………………………………………………………………………………………….. |
2-287 |
|
|
016-791 File Retrieve RAP ………………………………………………………………………………… |
2-262 |
018-770 LDAP RAP ………………………………………………………………………………………….. |
2-287 |
|
|
016-792 Specified Job RAP ……………………………………………………………………………….. |
2-263 |
018-771 LDAP RAP ………………………………………………………………………………………….. |
2-288 |
|
|
016-793 MF I/O HD Full RAP……………………………………………………………………………… |
2-263 |
018-780 LDAP RAP ………………………………………………………………………………………….. |
2-288 |
|
|
016-798 No Trust Marking Option RAP ……………………………………………………………….. |
2-264 |
018-781 LDAP RAP ………………………………………………………………………………………….. |
2-289 |
|
|
016-799 PLW Print Instruction RAP…………………………………………………………………….. |
2-264 |
018-782 LDAP RAP ………………………………………………………………………………………….. |
2-289 |
|
|
016-981 HDD access error RAP …………………………………………………………………………. |
2-265 |
018-783 LDAP RAP ………………………………………………………………………………………….. |
2-290 |
|
|
016-982 HDD access error 2 RAP ………………………………………………………………………. |
2-265 |
018-784 LDAP RAP ………………………………………………………………………………………….. |
2-290 |
|
|
016-983 Log Image Storage Area on Disk Full RAP………………………………………………. |
2-266 |
018-785 LDAP RAP ………………………………………………………………………………………….. |
2-291 |
|
|
016-985 Data size overflow (Scan to E-mail) RAP ………………………………………………… |
2-266 |
018-786 LDAP RAP ………………………………………………………………………………………….. |
2-291 |
|
|
018 LDAP |
018-787 LDAP RAP ………………………………………………………………………………………….. |
2-292 |
||
|
018-788 LDAP RAP |
2-292 |
|||
|
018-505 SMB-DOS protocol error RAP |
2-267 |
|||
|
018-789 LDAP RAP |
2-293 |
|||
|
018-543 Shared name error in SMB server RAP |
2-267 |
|||
|
018-790 LDAP RAP |
2-293 |
|||
|
018-547 Number restriction over of SMB scan users RAP |
2-268 |
|||
|
018-791 LDAP RAP |
2-294 |
|||
|
018-595 LDAP protocol error RAP |
2-268 |
|||
|
018-792 LDAP RAP |
2-294 |
|||
|
018-701 LDAP RAP |
2-269 |
|||
|
018-793 LDAP RAP |
2-295 |
|||
|
018-702 LDAP RAP |
2-269 |
|||
|
018-794 LDAP RAP |
2-295 |
|||
|
018-703 LDAP RAP |
2-270 |
|||
|
018-795 LDAP RAP |
2-296 |
|||
|
018-704 LDAP RAP |
2-270 |
|||
|
018-796 LDAP RAP |
2-296 |
|||
|
018-705 LDAP RAP |
2-271 |
|||
|
018-797 LDAP RAP |
2-297 |
|||
|
018-706 LDAP RAP |
2-271 |
|||
|
021 FAX |
||||
|
018-707 LDAP RAP ………………………………………………………………………………………….. |
2-272 |
|||
|
018-708 LDAP RAP ………………………………………………………………………………………….. |
2-272 |
021-360 EP Accessory Failure RAP ……………………………………………………………………. |
2-299 |
|
|
018-710 LDAP RAP ………………………………………………………………………………………….. |
2-273 |
021-361 EP Accessory Kind Configuration Error RAP……………………………………………. |
2-299 |
|
|
018-711 LDAP RAP ………………………………………………………………………………………….. |
2-273 |
021-731 EP Accessory — Function Disabled RAP ………………………………………………….. |
2-300 |
|
|
018-712 LDAP RAP ………………………………………………………………………………………….. |
2-274 |
021-732 EP Accessory — Service Canceled By Disable RAP…………………………………… |
2-300 |
|
|
018-713 LDAP RAP ………………………………………………………………………………………….. |
2-274 |
021-733 EP Accessory — Service Canceled By Color Mode Restriction RAP …………….. |
2-301 |
|
|
018-714 LDAP RAP ………………………………………………………………………………………….. |
2-275 |
021-750 Used Parts Request Failure (EP-SV) RAP ………………………………………………. |
2-301 |
|
|
018-716 LDAP RAP ………………………………………………………………………………………….. |
2-275 |
021-751 Maintenance Request Failure (EP-SV) RAP…………………………………………….. |
2-302 |
|
|
018-717 LDAP RAP ………………………………………………………………………………………….. |
2-276 |
021-770 Used Parts Request Failure (EP-DX) RAP ………………………………………………. |
2-302 |
|
|
018-718 LDAP RAP ………………………………………………………………………………………….. |
2-276 |
021-771 Maintenance Request Failure (EP-DX) RAP ……………………………………………. |
2-303 |
|
|
018-719 LDAP RAP ………………………………………………………………………………………….. |
2-277 |
021-772 EP-DX — Installation/Removal Failure RAP ………………………………………………. |
2-303 |
|
|
018-720 LDAP RAP ………………………………………………………………………………………….. |
2-277 |
021-941 EP — Scan Service Paused By Disable RAP …………………………………………….. |
2-304 |
|
|
018-721 LDAP RAP ………………………………………………………………………………………….. |
2-278 |
021-942 EP — Scan Service Paused By Color Mode RAP……………………………………….. |
2-304 |
|
|
018-732 LDAP RAP ………………………………………………………………………………………….. |
2-278 |
021-943 EP — Print Service Paused By Disable RAP ……………………………………………… |
2-305 |
|
|
018-733 LDAP RAP ………………………………………………………………………………………….. |
2-279 |
021-944 EP — Print Service Paused By Color Mode RAP ……………………………………….. |
2-305 |
|
|
018-734 LDAP RAP ………………………………………………………………………………………….. |
2-279 |
021-945 EP — Service Paused By Disable RAP …………………………………………………….. |
2-306 |
|
|
018-735 LDAP RAP ………………………………………………………………………………………….. |
2-280 |
021-946 EP — Service Paused By Color Mode RAP……………………………………………….. |
2-306 |
|
|
018-736 LDAP RAP ………………………………………………………………………………………….. |
2-280 |
024 IOT-ESS Communication |
||
|
018-748 LDAP RAP |
2-281 |
|||
|
024-340 IOT-ESS Communication 1 RAP |
2-307 |
|||
|
018-749 LDAP RAP |
2-281 |
|||
|
024-341 IOT-ESS Communication 2 RAP |
2-307 |
|||
|
018-750 LDAP RAP |
2-282 |
|||
|
024-342 IOT-ESS Communication 3 RAP |
2-308 |
|||
|
018-751 LDAP RAP |
2-282 |
|||
|
024-343 IOT-ESS Communication 4 RAP |
2-308 |
|||
|
018-752 LDAP RAP |
2-283 |
|||
|
024-345 IOT-ESS Communication 5 RAP |
2-309 |
|||
|
018-753 LDAP RAP |
2-283 |
|||
|
024-346 IOT-ESS Communication 6 RAP |
2-309 |
|||
|
018-754 LDAP RAP |
2-284 |
|||
|
024-347 IOT-ESS Communication 7 RAP |
2-310 |
|||
|
018-764 LDAP RAP |
2-284 |
|||
|
024-348 IOT-ESS Communication 8 RAP |
2-310 |
|||
|
018-765 LDAP RAP |
2-285 |
|||
|
024-349 IOT-ESS Communication 9 RAP |
2-311 |
|||
|
018-766 LDAP RAP |
2-285 |
|||
|
024-350 IOT-ESS Communication 10 RAP |
2-311 |
|||
|
018-767 LDAP RAP |
2-286 |
|||
|
Revision |
January 2007 |
Status-indicator-raps |
||
|
WorkCentre 7132 |
2-5 |
|
024-351 IOT-ESS Communication 11 RAP ………………………………………………………….. |
2-312 |
|
024-354 IOT-ESS Communication 14 RAP ………………………………………………………….. |
2-312 |
|
024-356 IOT-ESS Communication 16 RAP ………………………………………………………….. |
2-313 |
|
024-360 IOT-ESS Initialization RAP ……………………………………………………………………. |
2-313 |
|
024-362 Page Sync Start RAP……………………………………………………………………………. |
2-314 |
|
024-363 Page Sync Stop RAP……………………………………………………………………………. |
2-314 |
|
024-364 DMA Transfer RAP ………………………………………………………………………………. |
2-315 |
|
024-367 Decompression Synchronization RAP …………………………………………………….. |
2-315 |
|
024-368 PCI RAP……………………………………………………………………………………………… |
2-316 |
|
024-370 Marker Code Detection RAP………………………………………………………………….. |
2-316 |
|
024-371 IOT-ESS Communication 21 RAP ………………………………………………………….. |
2-317 |
|
024-372 IOT-ESS Communication 22 RAP ………………………………………………………….. |
2-317 |
|
024-373 IOT-ESS Communication 23 RAP ………………………………………………………….. |
2-318 |
|
024-375 IOT-ESS Communication 24 RAP ………………………………………………………….. |
2-318 |
|
024-600 Billing Master Counter RAP …………………………………………………………………… |
2-319 |
|
024-601 Billing Backup Counter 1 RAP ……………………………………………………………….. |
2-319 |
|
024-602 Billing Backup Counter 2 RAP ……………………………………………………………….. |
2-320 |
|
024-603 Software Key Master Counter RAP ………………………………………………………… |
2-320 |
|
024-604 Software Key Backup Counter 1 RAP …………………………………………………….. |
2-321 |
|
024-605 Software Key Backup Counter 2 RAP …………………………………………………….. |
2-321 |
|
024-747 Print Instruction RAP…………………………………………………………………………….. |
2-322 |
|
024-910 Tray 1 size mismatch RAP…………………………………………………………………….. |
2-323 |
|
024-911 Tray 2 size mismatch RAP…………………………………………………………………….. |
2-324 |
|
024-912 Tray 3 size mismatch RAP…………………………………………………………………….. |
2-325 |
|
024-916 Mix Full Stack RAP ………………………………………………………………………………. |
2-326 |
|
024-917 Stacker Tray Staple Set Over Count RAP ……………………………………………….. |
2-327 |
|
024-919 Face UP Tray Close RAP ……………………………………………………………………… |
2-327 |
|
024-920 Face Down Tray 1 Paper Full RAP…………………………………………………………. |
2-328 |
|
024-922 Face Down Tray 1 Paper Full RAP…………………………………………………………. |
2-328 |
|
024-923 Y Toner Empty …………………………………………………………………………………….. |
2-329 |
|
024-924 M Toner Empty ……………………………………………………………………………………. |
2-329 |
|
024-925 C Toner Empty…………………………………………………………………………………….. |
2-330 |
|
024-928 Scratch Sheet Compile RAP………………………………………………………………….. |
2-330 |
|
024-930 Stacker Tray Full RAP ………………………………………………………………………….. |
2-331 |
|
024-934 Paper Type Mismatch RAP……………………………………………………………………. |
2-332 |
|
024-946 Tray 1 Position RAP……………………………………………………………………………… |
2-332 |
|
024-947 2TM Tray 2 Position RAP ……………………………………………………………………… |
2-333 |
|
024-947 TTM Tray 2 Position RAP ……………………………………………………………………… |
2-333 |
|
024-948 2TM Tray 3 Position RAP ……………………………………………………………………… |
2-334 |
|
024-948 TTM Tray 3 Position RAP ……………………………………………………………………… |
2-334 |
|
024-950 Tray 1 Empty RAP ……………………………………………………………………………….. |
2-335 |
|
024-951 2TM Tray 2 Empty RAP ………………………………………………………………………… |
2-335 |
|
024-951 TTM Tray 2 Empty RAP………………………………………………………………………… |
2-336 |
|
024-952 2TM Tray 3 Empty RAP ………………………………………………………………………… |
2-336 |
|
024-952 TTM Tray 3 Empty RAP………………………………………………………………………… |
2-337 |
|
024-954 MSI Empty RAP …………………………………………………………………………………… |
2-337 |
|
024-958 MSI Size RAP ……………………………………………………………………………………… |
2-338 |
|
024-959 Tray 1 Paper Size RAP…………………………………………………………………………. |
2-339 |
|
024-960 Tray 2 Paper Size RAP…………………………………………………………………………. |
2-340 |
|
024-961 Tray 3 Paper Size RAP…………………………………………………………………………. |
2-341 |
|
024-965 ATS/APS Paper (IOT detect) RAP………………………………………………………….. |
2-342 |
|
024-966 ATS/APS Destination RAP ……………………………………………………………………. |
2-343 |
|
024-967 Mixed Width Paper (Staple Job) RAP……………………………………………………… |
2-344 |
|
|
024-976 Staple Status Failed RAP………………………………………………………………………. |
2-345 |
|
|
024-977 |
Stapler Feed Ready RAP………………………………………………………………………. |
2-346 |
|
024-979 |
Stapler Near Empty RAP ………………………………………………………………………. |
2-346 |
|
024-980 |
Stacker Tray Full RAP…………………………………………………………………………… |
2-347 |
|
024-982 |
Stacker Lower Safety Warning RAP ……………………………………………………….. |
2-348 |
|
024-985 MSI Feed RAP …………………………………………………………………………………….. |
2-349 |
024 IOT-ESS Communication-a-finisher
|
024-916 (A-Finisher) Mix Stack Full …………………………………………………………………….. |
2-351 |
|
|
024-917 (A-Finisher) Stacker Tray Staple Set Over Count……………………………………… |
2-352 |
|
|
024-928 (A-Finisher) Scratch Sheet Compile………………………………………………………… |
2-354 |
|
|
024-930 (A-Finisher) Stacker Tray Full Stack ……………………………………………………….. |
2-354 |
|
|
024-976 (A-Finisher) Staple NG………………………………………………………………………….. |
2-356 |
|
|
024-977 |
(A-Finisher) Stapler Feed Ready Fail………………………………………………………. |
2-357 |
|
024-979 |
(A-Finisher) Stapler Near Empty …………………………………………………………….. |
2-357 |
|
024-980 |
(A-Finisher) Stacker Tray Full Stack ……………………………………………………….. |
2-358 |
|
024-982 |
(A-Finisher) Stacker Lower Safety Warning……………………………………………… |
2-359 |
025 HDD Diagnostics
|
025-596 |
Diagnostic HDD Maintenance RAP…………………………………………………………. |
2-361 |
|
025-597 |
Diagnostic HDD Initialize RAP ……………………………………………………………….. |
2-361 |
026 Address Book
|
026-700 |
LDAP Protocol Max Error RAP ………………………………………………………………. |
2-363 |
|
026-701 |
Address Book Request Overflow RAP…………………………………………………….. |
2-363 |
|
026-702 |
Address Book Directory Service Overflow RAP………………………………………… |
2-364 |
027 MAIL
|
027-452 Duplicate IP Address RAP …………………………………………………………………….. |
2-365 |
|
027-500 SMTP Server Mail I/O RAP……………………………………………………………………. |
2-365 |
|
027-501 POP Server RAP………………………………………………………………………………….. |
2-366 |
|
027-502 POP Authentication RAP ………………………………………………………………………. |
2-366 |
|
027-513 SMB Scan Client RAP…………………………………………………………………………… |
2-367 |
|
027-514 Host Name Solution Error RAP………………………………………………………………. |
2-367 |
|
027-515 DNS Server Error in SMB RAP ………………………………………………………………. |
2-368 |
|
027-516 Server Connection Error in SMB RAP …………………………………………………….. |
2-368 |
|
027-518 Login/Password Error RAP ……………………………………………………………………. |
2-369 |
|
027-519 Scanning Picture Error RAP…………………………………………………………………… |
2-369 |
|
027-520 File Name Acquisition Failure RAP…………………………………………………………. |
2-370 |
|
027-521 File Name Suffix Limit Error RAP……………………………………………………………. |
2-370 |
|
027-522 File Creation Failure RAP ……………………………………………………………………… |
2-371 |
|
027-523 Lock Folder Creation Failure RAP ………………………………………………………….. |
2-371 |
|
027-524 Folder Creation Failure RAP………………………………………………………………….. |
2-372 |
|
027-525 File Delete Failure RAP…………………………………………………………………………. |
2-372 |
|
027-526 Lock Folder Delete Failure RAP……………………………………………………………… |
2-373 |
|
027-527 Folder Delete Failure RAP …………………………………………………………………….. |
2-373 |
|
027-528 Data Write-in Failure RAP……………………………………………………………………… |
2-374 |
|
027-529 Data Read Failure RAP…………………………………………………………………………. |
2-374 |
|
027-530 Data Reading Failure RAP…………………………………………………………………….. |
2-375 |
|
027-531 Scan Filing Policy Injustice RAP …………………………………………………………….. |
2-375 |
|
027-532 NEXTNAME.DAT file access error RAP ………………………………………………….. |
2-376 |
|
027-533 Internal Scan Error RAP………………………………………………………………………… |
2-376 |
|
Status-indicator-raps |
January 2007 |
Revision |
|
2-6 |
WorkCentre 7132 |
|
027-543 Server Name Specification Error RAP …………………………………………………….. |
2-377 |
|
027-547 SMB Protocol error 4-007 RAP………………………………………………………………. |
2-377 |
|
027-548 SMB Protocol error 4-008 RAP………………………………………………………………. |
2-378 |
|
027-549 SMB Protocol error 4-009 RAP………………………………………………………………. |
2-378 |
|
027-564 SMB Protocol error 4-024 RAP………………………………………………………………. |
2-379 |
|
027-565 SMB Protocol error 4-025 RAP………………………………………………………………. |
2-379 |
|
027-566 SMB Protocol error 4-026 RAP………………………………………………………………. |
2-380 |
|
027-569 SMB (TCP/IP) is not Started RAP…………………………………………………………… |
2-380 |
|
027-572 SMB Protocol error 4-032 RAP………………………………………………………………. |
2-381 |
|
027-573 SMB Protocol error 4-033 RAP………………………………………………………………. |
2-381 |
|
027-574 SMB Protocol error 4-034 RAP………………………………………………………………. |
2-382 |
|
027-576 SMB Protocol error 4-036 RAP………………………………………………………………. |
2-382 |
|
027-578 SMB Protocol error 4-038 RAP………………………………………………………………. |
2-383 |
|
027-584 SMB Protocol error 4-044 RAP………………………………………………………………. |
2-383 |
|
027-585 SMB Protocol error 4-045 RAP………………………………………………………………. |
2-384 |
|
027-586 SMB Protocol error 4-046 RAP………………………………………………………………. |
2-384 |
|
027-587 SMB Protocol error 4-047 RAP………………………………………………………………. |
2-385 |
|
027-588 SMB Protocol error 4-048 RAP………………………………………………………………. |
2-385 |
|
027-589 SMB Protocol error 4-049 RAP………………………………………………………………. |
2-386 |
|
027-590 SMB Protocol error 4-050 RAP………………………………………………………………. |
2-386 |
|
027-591 SMB Protocol error 4-051 RAP………………………………………………………………. |
2-387 |
|
027-599 SMB Protocol error 4-other codes RAP …………………………………………………… |
2-387 |
|
027-599 SMB Protocol error 4-other codes RAP …………………………………………………… |
2-388 |
|
027-706 Certificate RAP ……………………………………………………………………………………. |
2-388 |
|
027-707 Certificate Expired RAP ………………………………………………………………………… |
2-389 |
|
027-708 Certificate Valid RAP ……………………………………………………………………………. |
2-389 |
|
027-709 Certificate Revoked RAP ………………………………………………………………………. |
2-390 |
|
027-710 Invalid S/MIME Mail RAP………………………………………………………………………. |
2-390 |
|
027-711 S/MIME Mail Certificate RAP …………………………………………………………………. |
2-391 |
|
027-712 S/MIME Mail Certificate RAP …………………………………………………………………. |
2-391 |
|
027-713 S/MIME Mail Altered RAP……………………………………………………………………… |
2-392 |
|
027-714 S/MIME Mail Invalid RAP………………………………………………………………………. |
2-392 |
|
027-715 S/MIME Mail Certificate Registration RAP……………………………………………….. |
2-393 |
|
027-716 Email Signature RAP ……………………………………………………………………………. |
2-393 |
|
027-720 Extension Server Host RAP…………………………………………………………………… |
2-394 |
|
027-721 Extension Server RAP ………………………………………………………………………….. |
2-394 |
|
027-722 Extension Server Time-out RAP …………………………………………………………….. |
2-395 |
|
027-723 Extension Server Authentication RAP …………………………………………………….. |
2-395 |
|
027-724 Extension Server Access RAP……………………………………………………………….. |
2-396 |
|
027-725 Extension Server Operation RAP …………………………………………………………… |
2-396 |
|
027-726 Extension Server State RAP………………………………………………………………….. |
2-397 |
|
027-727 Extension Server Parameters RAP…………………………………………………………. |
2-397 |
|
027-728 Extension Server File RAP ……………………………………………………………………. |
2-398 |
|
027-737 Template Server Read RAP ………………………………………………………………….. |
2-398 |
|
027-739 Invalid Template Server Path RAP …………………………………………………………. |
2-399 |
|
027-740 Template Server Login RAP ………………………………………………………………….. |
2-399 |
|
027-741 Template Server Connect RAP………………………………………………………………. |
2-400 |
|
027-742 HDD File System RAP ………………………………………………………………………….. |
2-400 |
|
027-743 Template Server Install RAP………………………………………………………………….. |
2-401 |
|
027-744 Template Address RAP ………………………………………………………………………… |
2-401 |
|
027-745 Template Address Server RAP………………………………………………………………. |
2-402 |
|
027-746 Job Template Pool Server RAP ……………………………………………………………… |
2-402 |
|
027-750 Fax Document Inhibited RAP…………………………………………………………………. |
2-403 |
|
|
027-751 Job Template Analysis RAP…………………………………………………………………… |
2-403 |
|
|
027-752 Required User Entry Not Entered RAP ……………………………………………………. |
2-404 |
|
|
027-753 |
Job Flow Service Disabled RAP …………………………………………………………….. |
2-404 |
|
027-754 |
Job Flow Service File Signature Mismatch RAP……………………………………….. |
2-405 |
|
027-796 |
E-mail Not Printed RAP…………………………………………………………………………. |
2-405 |
|
027-797 |
Invalid Output Destination RAP………………………………………………………………. |
2-406 |
033 FAX Control
|
033-363 Fax Control RAP ………………………………………………………………………………….. |
2-407 |
|
033-710 Fax Control RAP ………………………………………………………………………………….. |
2-407 |
|
033-712 Fax Control RAP ………………………………………………………………………………….. |
2-408 |
|
033-713 Fax Control RAP ………………………………………………………………………………….. |
2-408 |
|
033-715 Fax Control RAP ………………………………………………………………………………….. |
2-409 |
|
033-716 Fax Control RAP ………………………………………………………………………………….. |
2-409 |
|
033-717 Fax Control RAP ………………………………………………………………………………….. |
2-410 |
|
033-718 Fax Control RAP ………………………………………………………………………………….. |
2-410 |
|
033-719 Fax Control RAP ………………………………………………………………………………….. |
2-411 |
|
033-721 Fax Control RAP ………………………………………………………………………………….. |
2-411 |
|
033-722 Fax Control RAP ………………………………………………………………………………….. |
2-412 |
|
033-724 Fax Control RAP ………………………………………………………………………………….. |
2-412 |
|
033-725 Fax Control RAP ………………………………………………………………………………….. |
2-413 |
|
033-726 Fax Control RAP ………………………………………………………………………………….. |
2-413 |
|
033-727 Fax Control RAP ………………………………………………………………………………….. |
2-414 |
|
033-728 Fax Control RAP ………………………………………………………………………………….. |
2-414 |
|
033-731 Fax Control RAP ………………………………………………………………………………….. |
2-415 |
|
033-732 Fax Control RAP ………………………………………………………………………………….. |
2-415 |
|
033-733 Fax Control RAP ………………………………………………………………………………….. |
2-416 |
|
033-734 Fax Control RAP ………………………………………………………………………………….. |
2-416 |
|
033-735 Fax Control RAP ………………………………………………………………………………….. |
2-417 |
|
033-736 Fax Control RAP ………………………………………………………………………………….. |
2-417 |
|
033-737 Fax Control RAP ………………………………………………………………………………….. |
2-418 |
|
033-738 Fax Control RAP ………………………………………………………………………………….. |
2-418 |
|
033-740 Fax Control RAP ………………………………………………………………………………….. |
2-419 |
|
033-741 Fax Control RAP ………………………………………………………………………………….. |
2-419 |
|
033-742 Fax Control RAP ………………………………………………………………………………….. |
2-420 |
|
033-743 Fax Control RAP ………………………………………………………………………………….. |
2-420 |
|
033-744 Fax Control RAP ………………………………………………………………………………….. |
2-421 |
|
033-745 Fax Control RAP ………………………………………………………………………………….. |
2-421 |
|
033-746 Fax Control RAP ………………………………………………………………………………….. |
2-422 |
|
033-747 Fax Control RAP ………………………………………………………………………………….. |
2-422 |
|
033-749 Fax Control RAP ………………………………………………………………………………….. |
2-423 |
|
033-750 Fax Control RAP ………………………………………………………………………………….. |
2-423 |
|
033-751 Activity Report suspended RAP……………………………………………………………… |
2-424 |
|
033-755 Fax printing is canceled Fax RAP …………………………………………………………… |
2-424 |
|
033-790 Fax Control RAP ………………………………………………………………………………….. |
2-425 |
|
033-755 Fax Control RAP ………………………………………………………………………………….. |
2-425 |
|
033-792 Fax Control RAP ………………………………………………………………………………….. |
2-426 |
034 FAX Communication
|
034-211 Fax Communication RAP………………………………………………………………………. |
2-427 |
|
034-212 Fax Communication RAP………………………………………………………………………. |
2-427 |
|
Revision |
January 2007 |
Status-indicator-raps |
|
WorkCentre 7132 |
2-7 |
|
034-500 Fax Communication RAP………………………………………………………………………. |
2-428 |
034-738 Fax Communication RAP |
………………………………………………………………………. 2-454 |
|
034-501 Fax Communication RAP………………………………………………………………………. |
2-428 |
034-739 Fax Communication RAP………………………………………………………………………. |
2-454 |
|
034-505 Fax Communication RAP………………………………………………………………………. |
2-429 |
034-740 Fax Communication RAP………………………………………………………………………. |
2-455 |
|
034-506 Fax Communication RAP………………………………………………………………………. |
2-429 |
034-741 Fax Communication RAP………………………………………………………………………. |
2-455 |
|
034-507 Fax Communication RAP………………………………………………………………………. |
2-430 |
034-742 Fax Communication RAP………………………………………………………………………. |
2-456 |
|
034-508 Fax Communication RAP………………………………………………………………………. |
2-430 |
034-743 Fax Communication RAP………………………………………………………………………. |
2-456 |
|
034-509 Fax Communication RAP………………………………………………………………………. |
2-431 |
034-744 Fax Communication RAP………………………………………………………………………. |
2-457 |
|
034-510 Fax Communication RAP………………………………………………………………………. |
2-431 |
034-745 Fax Communication RAP………………………………………………………………………. |
2-457 |
|
034-511 Fax Communication RAP………………………………………………………………………. |
2-432 |
034-746 Fax Communication RAP………………………………………………………………………. |
2-458 |
|
034-512 Fax Communication RAP………………………………………………………………………. |
2-432 |
034-747 Fax Communication RAP………………………………………………………………………. |
2-458 |
|
034-513 Fax Communication RAP………………………………………………………………………. |
2-433 |
034-748 Fax Communication RAP………………………………………………………………………. |
2-459 |
|
034-514 Fax Communication RAP………………………………………………………………………. |
2-433 |
034-749 Fax Communication RAP………………………………………………………………………. |
2-459 |
|
034-515 Fax Communication RAP………………………………………………………………………. |
2-434 |
034-750 Fax Communication RAP………………………………………………………………………. |
2-460 |
|
034-519 Fax Communication RAP………………………………………………………………………. |
2-434 |
034-751 Fax Communication RAP………………………………………………………………………. |
2-460 |
|
034-520 Fax Communication RAP………………………………………………………………………. |
2-435 |
034-752 Fax Communication RAP………………………………………………………………………. |
2-461 |
|
034-522 Fax Communication RAP………………………………………………………………………. |
2-435 |
034-753 Fax Communication RAP………………………………………………………………………. |
2-461 |
|
034-523 Fax Communication RAP………………………………………………………………………. |
2-436 |
034-754 Fax Communication RAP………………………………………………………………………. |
2-462 |
|
034-528 Fax Communication RAP………………………………………………………………………. |
2-436 |
034-755 Fax Communication RAP………………………………………………………………………. |
2-462 |
|
034-529 Fax Communication RAP………………………………………………………………………. |
2-437 |
034-756 Fax Communication RAP………………………………………………………………………. |
2-463 |
|
034-530 Fax Communication RAP………………………………………………………………………. |
2-437 |
034-757 Fax Communication RAP………………………………………………………………………. |
2-463 |
|
034-550 Write to FaxCard-ROM error detection RAP…………………………………………….. |
2-438 |
034-758 Fax Communication RAP………………………………………………………………………. |
2-464 |
|
034-702 Fax Communication RAP………………………………………………………………………. |
2-438 |
034-759 Fax Communication RAP………………………………………………………………………. |
2-464 |
|
034-703 Fax Communication RAP………………………………………………………………………. |
2-439 |
034-760 Fax Communication RAP………………………………………………………………………. |
2-465 |
|
034-704 Fax Communication RAP………………………………………………………………………. |
2-439 |
034-761 Fax Communication RAP………………………………………………………………………. |
2-465 |
|
034-705 Fax Communication RAP………………………………………………………………………. |
2-440 |
034-762 Fax Communication RAP………………………………………………………………………. |
2-466 |
|
034-706 Fax Communication RAP………………………………………………………………………. |
2-440 |
034-763 Fax Communication RAP………………………………………………………………………. |
2-466 |
|
034-707 Fax Communication RAP………………………………………………………………………. |
2-441 |
034-764 Fax Communication RAP………………………………………………………………………. |
2-467 |
|
034-708 Fax Communication RAP………………………………………………………………………. |
2-441 |
034-765 Fax Communication RAP………………………………………………………………………. |
2-467 |
|
034-709 Fax Communication RAP………………………………………………………………………. |
2-442 |
034-766 Fax Communication RAP………………………………………………………………………. |
2-468 |
|
034-710 Fax Communication RAP………………………………………………………………………. |
2-442 |
034-767 Fax Communication RAP………………………………………………………………………. |
2-468 |
|
034-711 Fax Communication RAP………………………………………………………………………. |
2-443 |
034-768 Fax Communication RAP………………………………………………………………………. |
2-469 |
|
034-712 Fax Communication RAP………………………………………………………………………. |
2-443 |
034-769 Fax Communication RAP………………………………………………………………………. |
2-469 |
|
034-713 Fax Communication RAP………………………………………………………………………. |
2-444 |
034-770 Fax Communication RAP………………………………………………………………………. |
2-470 |
|
034-714 Fax Communication RAP………………………………………………………………………. |
2-444 |
034-771 Fax Communication RAP………………………………………………………………………. |
2-470 |
|
034-715 Fax Communication RAP………………………………………………………………………. |
2-445 |
034-772 Fax Communication RAP………………………………………………………………………. |
2-471 |
|
034-716 Fax Communication RAP………………………………………………………………………. |
2-445 |
034-773 Fax Communication RAP………………………………………………………………………. |
2-471 |
|
034-717 Fax Communication RAP………………………………………………………………………. |
2-446 |
034-774 Fax Communication RAP………………………………………………………………………. |
2-472 |
|
034-718 Fax Communication RAP………………………………………………………………………. |
2-446 |
034-775 Fax Communication RAP………………………………………………………………………. |
2-472 |
|
034-719 Fax Communication RAP………………………………………………………………………. |
2-447 |
034-776 Fax Communication RAP………………………………………………………………………. |
2-473 |
|
034-720 Fax Communication RAP………………………………………………………………………. |
2-447 |
034-777 Fax Communication RAP………………………………………………………………………. |
2-473 |
|
034-722 Fax Communication RAP………………………………………………………………………. |
2-448 |
034-778 Fax Communication RAP………………………………………………………………………. |
2-474 |
|
034-724 Fax Communication RAP………………………………………………………………………. |
2-448 |
034-779 Fax Communication RAP………………………………………………………………………. |
2-474 |
|
034-725 Fax Communication RAP………………………………………………………………………. |
2-449 |
034-780 Fax Communication RAP………………………………………………………………………. |
2-475 |
|
034-726 Fax Communication RAP………………………………………………………………………. |
2-449 |
034-781 Fax Communication RAP………………………………………………………………………. |
2-475 |
|
034-729 Fax Communication RAP………………………………………………………………………. |
2-450 |
034-782 Fax Communication RAP………………………………………………………………………. |
2-476 |
|
034-730 Fax Communication RAP………………………………………………………………………. |
2-450 |
034-783 Fax Communication RAP………………………………………………………………………. |
2-476 |
|
034-731 Fax Communication RAP………………………………………………………………………. |
2-451 |
034-784 Fax Communication RAP………………………………………………………………………. |
2-477 |
|
034-732 Fax Communication RAP………………………………………………………………………. |
2-451 |
034-785 Fax Communication RAP………………………………………………………………………. |
2-477 |
|
034-733 Fax Communication RAP………………………………………………………………………. |
2-452 |
034-786 Fax Communication RAP………………………………………………………………………. |
2-478 |
|
034-735 Fax Communication RAP………………………………………………………………………. |
2-452 |
034-787 Fax Communication RAP………………………………………………………………………. |
2-478 |
|
034-736 Fax Communication RAP………………………………………………………………………. |
2-453 |
034-788 Fax Communication RAP………………………………………………………………………. |
2-479 |
|
034-737 Fax Communication RAP………………………………………………………………………. |
2-453 |
034-789 Fax Communication RAP………………………………………………………………………. |
2-479 |
|
Status-indicator-raps |
January 2007 |
Revision |
|
|
2-8 |
WorkCentre 7132 |
|
034-790 Fax Communication Channel 0 RAP ………………………………………………………. |
2-480 |
035-741 Fax Protocol RAP…………………………………………………………………………………. |
2-506 |
|
|
034-791 Fax Communication Channel 1 RAP ………………………………………………………. |
2-480 |
035-742 Fax Protocol RAP…………………………………………………………………………………. |
2-507 |
|
|
034-792 Fax Communication Channel 2 RAP ………………………………………………………. |
2-481 |
035-743 Fax Protocol RAP…………………………………………………………………………………. |
2-507 |
|
|
034-793 Fax Communication Channel 3 RAP ………………………………………………………. |
2-481 |
035-744 Fax Protocol RAP…………………………………………………………………………………. |
2-508 |
|
|
034-794 Fax Communication Channel 4 RAP ………………………………………………………. |
2-482 |
035-745 Fax Protocol RAP…………………………………………………………………………………. |
2-508 |
|
|
034-795 Fax Communication Channel 5 RAP ………………………………………………………. |
2-482 |
035-746 Fax Protocol RAP…………………………………………………………………………………. |
2-509 |
|
|
034-796 Fax Communication Channel RAP …………………………………………………………. |
2-483 |
035-747 Fax Protocol RAP…………………………………………………………………………………. |
2-509 |
|
|
035 FAX Network |
035-748 Fax Protocol RAP…………………………………………………………………………………. |
2-510 |
||
|
035-749 Fax Protocol RAP |
2-510 |
|||
|
035-500 Fax Protocol RAP |
2-485 |
|||
|
035-750 Fax Protocol RAP |
2-511 |
|||
|
035-550 Write to FaxG3-ROM error detection RAP |
2-485 |
|||
|
035-751 Fax Protocol RAP |
2-511 |
|||
|
035-700 Fax Protocol RAP |
2-486 |
|||
|
035-752 Fax Protocol RAP |
2-512 |
|||
|
035-701 Fax Protocol RAP |
2-486 |
|||
|
035-762 Fax Protocol RAP |
2-512 |
|||
|
035-702 Fax Protocol RAP |
2-487 |
|||
|
036 FAX Parameter |
||||
|
035-703 Fax Protocol RAP ………………………………………………………………………………… |
2-487 |
|||
|
035-704 Fax Protocol RAP ………………………………………………………………………………… |
2-488 |
036-500 Fax Parameter RAP ……………………………………………………………………………… |
2-513 |
|
|
035-705 Fax Protocol RAP ………………………………………………………………………………… |
2-488 |
036-501 Fax Parameter RAP ……………………………………………………………………………… |
2-513 |
|
|
035-706 Fax Protocol RAP ………………………………………………………………………………… |
2-489 |
036-502 Fax Parameter RAP ……………………………………………………………………………… |
2-514 |
|
|
035-707 Fax Protocol RAP ………………………………………………………………………………… |
2-489 |
036-503 Fax Parameter RAP ……………………………………………………………………………… |
2-514 |
|
|
035-708 Fax Protocol RAP ………………………………………………………………………………… |
2-490 |
036-504 Fax Parameter RAP ……………………………………………………………………………… |
2-515 |
|
|
035-709 Fax Protocol RAP ………………………………………………………………………………… |
2-490 |
036-505 Fax Parameter RAP ……………………………………………………………………………… |
2-515 |
|
|
035-710 Fax Protocol RAP ………………………………………………………………………………… |
2-491 |
036-506 Fax Parameter RAP ……………………………………………………………………………… |
2-516 |
|
|
035-711 Fax Protocol RAP ………………………………………………………………………………… |
2-491 |
036-507 Fax Parameter RAP ……………………………………………………………………………… |
2-516 |
|
|
035-712 Fax Protocol RAP ………………………………………………………………………………… |
2-492 |
036-508 Fax Parameter RAP ……………………………………………………………………………… |
2-517 |
|
|
035-713 Fax Protocol RAP ………………………………………………………………………………… |
2-492 |
036-509 Fax Parameter RAP ……………………………………………………………………………… |
2-517 |
|
|
035-714 Fax Protocol RAP ………………………………………………………………………………… |
2-493 |
036-510 Fax Parameter RAP ……………………………………………………………………………… |
2-518 |
|
|
035-715 Fax Protocol RAP ………………………………………………………………………………… |
2-493 |
036-511 Fax Parameter RAP ……………………………………………………………………………… |
2-518 |
|
|
035-716 Fax Protocol RAP ………………………………………………………………………………… |
2-494 |
036-512 Fax Parameter RAP ……………………………………………………………………………… |
2-519 |
|
|
035-717 Fax Protocol RAP ………………………………………………………………………………… |
2-494 |
036-513 Fax Parameter RAP ……………………………………………………………………………… |
2-519 |
|
|
035-718 Fax Protocol RAP ………………………………………………………………………………… |
2-495 |
036-514 Fax Parameter RAP ……………………………………………………………………………… |
2-520 |
|
|
035-719 Fax Protocol RAP ………………………………………………………………………………… |
2-495 |
036-515 Fax Parameter RAP ……………………………………………………………………………… |
2-520 |
|
|
035-720 Fax Protocol RAP ………………………………………………………………………………… |
2-496 |
036-516 Fax Parameter RAP ……………………………………………………………………………… |
2-521 |
|
|
035-721 Fax Protocol RAP ………………………………………………………………………………… |
2-496 |
036-517 Fax Parameter RAP ……………………………………………………………………………… |
2-521 |
|
|
035-722 Fax Protocol RAP ………………………………………………………………………………… |
2-497 |
036-518 Fax Parameter RAP ……………………………………………………………………………… |
2-522 |
|
|
035-723 Fax Protocol RAP ………………………………………………………………………………… |
2-497 |
036-519 Fax Parameter RAP ……………………………………………………………………………… |
2-522 |
|
|
035-724 Fax Protocol RAP ………………………………………………………………………………… |
2-498 |
036-520 Fax Parameter RAP ……………………………………………………………………………… |
2-523 |
|
|
035-725 Fax Protocol RAP ………………………………………………………………………………… |
2-498 |
036-521 Fax Parameter RAP ……………………………………………………………………………… |
2-523 |
|
|
035-726 Fax Protocol RAP ………………………………………………………………………………… |
2-499 |
036-522 Fax Parameter RAP ……………………………………………………………………………… |
2-524 |
|
|
035-727 Fax Protocol RAP ………………………………………………………………………………… |
2-499 |
036-523 Fax Parameter RAP ……………………………………………………………………………… |
2-524 |
|
|
035-728 Fax Protocol RAP ………………………………………………………………………………… |
2-500 |
036-524 Fax Parameter RAP ……………………………………………………………………………… |
2-525 |
|
|
035-729 Fax Protocol RAP ………………………………………………………………………………… |
2-500 |
036-525 Fax Parameter RAP ……………………………………………………………………………… |
2-525 |
|
|
035-730 Fax Protocol RAP ………………………………………………………………………………… |
2-501 |
036-526 Fax Parameter RAP ……………………………………………………………………………… |
2-526 |
|
|
035-731 Fax Protocol RAP ………………………………………………………………………………… |
2-501 |
036-527 Fax Parameter RAP ……………………………………………………………………………… |
2-526 |
|
|
035-732 Fax Protocol RAP ………………………………………………………………………………… |
2-502 |
036-528 Fax Parameter RAP ……………………………………………………………………………… |
2-527 |
|
|
035-733 Fax Protocol RAP ………………………………………………………………………………… |
2-502 |
036-529 Fax Parameter RAP ……………………………………………………………………………… |
2-527 |
|
|
035-734 Fax Protocol RAP ………………………………………………………………………………… |
2-503 |
036-530 Fax Parameter RAP ……………………………………………………………………………… |
2-528 |
|
|
035-735 Fax Protocol RAP ………………………………………………………………………………… |
2-503 |
036-531 Fax Parameter RAP ……………………………………………………………………………… |
2-528 |
|
|
035-736 Fax Protocol RAP ………………………………………………………………………………… |
2-504 |
036-532 Fax Parameter RAP ……………………………………………………………………………… |
2-529 |
|
|
035-737 Fax Protocol RAP ………………………………………………………………………………… |
2-504 |
036-533 Fax Parameter RAP ……………………………………………………………………………… |
2-529 |
|
|
035-738 Fax Protocol RAP ………………………………………………………………………………… |
2-505 |
036-534 Fax Parameter RAP ……………………………………………………………………………… |
2-530 |
|
|
035-739 Fax Protocol RAP ………………………………………………………………………………… |
2-505 |
036-535 Fax Parameter RAP ……………………………………………………………………………… |
2-530 |
|
|
035-740 Fax Protocol RAP ………………………………………………………………………………… |
2-506 |
036-536 Fax Parameter RAP ……………………………………………………………………………… |
2-531 |
|
|
Revision |
January 2007 |
Status-indicator-raps |
||
|
WorkCentre 7132 |
2-9 |
|
036-537 Fax Parameter RAP……………………………………………………………………………… |
2-531 |
036-745 Fax Parameter RAP |
……………………………………………………………………………… 2-557 |
|
036-538 Fax Parameter RAP……………………………………………………………………………… |
2-532 |
036-746 Fax Parameter RAP ……………………………………………………………………………… |
2-558 |
|
036-539 Fax Parameter RAP……………………………………………………………………………… |
2-532 |
036-747 Fax Parameter RAP ……………………………………………………………………………… |
2-558 |
|
036-540 Fax Parameter RAP……………………………………………………………………………… |
2-533 |
036-748 Fax Parameter RAP ……………………………………………………………………………… |
2-559 |
|
036-541 Fax Parameter RAP……………………………………………………………………………… |
2-533 |
036-749 Fax Parameter RAP ……………………………………………………………………………… |
2-559 |
|
036-542 Fax Parameter RAP……………………………………………………………………………… |
2-534 |
036-750 Fax Parameter RAP ……………………………………………………………………………… |
2-560 |
|
036-550 Fax Parameter RAP……………………………………………………………………………… |
2-534 |
036-751 Fax Parameter RAP ……………………………………………………………………………… |
2-560 |
|
036-700 Fax Parameter RAP……………………………………………………………………………… |
2-535 |
036-752 Fax Parameter RAP ……………………………………………………………………………… |
2-561 |
|
036-701 Fax Parameter RAP……………………………………………………………………………… |
2-535 |
036-753 Fax Parameter RAP ……………………………………………………………………………… |
2-561 |
|
036-702 Fax Parameter RAP……………………………………………………………………………… |
2-536 |
036-754 Fax Parameter RAP ……………………………………………………………………………… |
2-562 |
|
036-703 Fax Parameter RAP……………………………………………………………………………… |
2-536 |
036-755 Fax Parameter RAP ……………………………………………………………………………… |
2-562 |
|
036-704 Fax Parameter RAP……………………………………………………………………………… |
2-537 |
036-756 Fax Parameter RAP ……………………………………………………………………………… |
2-563 |
|
036-705 Fax Parameter RAP……………………………………………………………………………… |
2-537 |
036-757 Fax Parameter RAP ……………………………………………………………………………… |
2-563 |
|
036-706 Fax Parameter RAP……………………………………………………………………………… |
2-538 |
036-758 Fax Parameter RAP ……………………………………………………………………………… |
2-564 |
|
036-707 Fax Parameter RAP……………………………………………………………………………… |
2-538 |
036-759 Fax Parameter RAP ……………………………………………………………………………… |
2-564 |
|
036-708 Fax Parameter RAP……………………………………………………………………………… |
2-539 |
036-760 Fax Parameter RAP ……………………………………………………………………………… |
2-565 |
|
036-709 Fax Parameter RAP……………………………………………………………………………… |
2-539 |
036-761 Fax Parameter RAP ……………………………………………………………………………… |
2-565 |
|
036-710 Fax Parameter RAP……………………………………………………………………………… |
2-540 |
036-762 Fax Parameter RAP ……………………………………………………………………………… |
2-566 |
|
036-711 Fax Parameter RAP……………………………………………………………………………… |
2-540 |
036-763 Fax Parameter RAP ……………………………………………………………………………… |
2-566 |
|
036-712 Fax Parameter RAP……………………………………………………………………………… |
2-541 |
036-764 Fax Parameter RAP ……………………………………………………………………………… |
2-567 |
|
036-713 Fax Parameter RAP……………………………………………………………………………… |
2-541 |
036-765 Fax Parameter RAP ……………………………………………………………………………… |
2-567 |
|
036-714 Fax Parameter RAP……………………………………………………………………………… |
2-542 |
036-766 Fax Parameter RAP ……………………………………………………………………………… |
2-568 |
|
036-715 Fax Parameter RAP……………………………………………………………………………… |
2-542 |
036-767 Fax Parameter RAP ……………………………………………………………………………… |
2-568 |
|
036-716 Fax Parameter RAP……………………………………………………………………………… |
2-543 |
036-768 Fax Parameter RAP ……………………………………………………………………………… |
2-569 |
|
036-717 Fax Parameter RAP……………………………………………………………………………… |
2-543 |
036-769 Fax Parameter RAP ……………………………………………………………………………… |
2-569 |
|
036-718 Fax Parameter RAP……………………………………………………………………………… |
2-544 |
036-770 Fax Parameter RAP ……………………………………………………………………………… |
2-570 |
|
036-719 Fax Parameter RAP……………………………………………………………………………… |
2-544 |
036-771 Fax Parameter RAP ……………………………………………………………………………… |
2-570 |
|
036-720 Fax Parameter RAP……………………………………………………………………………… |
2-545 |
036-772 Fax Parameter RAP ……………………………………………………………………………… |
2-571 |
|
036-721 Fax Parameter RAP……………………………………………………………………………… |
2-545 |
036-773 Fax Parameter RAP ……………………………………………………………………………… |
2-571 |
|
036-722 Fax Parameter RAP……………………………………………………………………………… |
2-546 |
036-774 Fax Parameter RAP ……………………………………………………………………………… |
2-572 |
|
036-723 Fax Parameter RAP……………………………………………………………………………… |
2-546 |
036-775 Fax Parameter RAP ……………………………………………………………………………… |
2-572 |
|
036-724 Fax Parameter RAP……………………………………………………………………………… |
2-547 |
036-776 Fax Parameter RAP ……………………………………………………………………………… |
2-573 |
|
036-725 Fax Parameter RAP……………………………………………………………………………… |
2-547 |
036-777 Fax Parameter RAP ……………………………………………………………………………… |
2-573 |
|
036-726 Fax Parameter RAP……………………………………………………………………………… |
2-548 |
036-778 Fax Parameter RAP ……………………………………………………………………………… |
2-574 |
|
036-727 Fax Parameter RAP……………………………………………………………………………… |
2-548 |
036-779 Fax Parameter RAP ……………………………………………………………………………… |
2-574 |
|
036-728 Fax Parameter RAP……………………………………………………………………………… |
2-549 |
036-780 Fax Parameter RAP ……………………………………………………………………………… |
2-575 |
|
036-729 Fax Parameter RAP……………………………………………………………………………… |
2-549 |
036-781 Fax Parameter RAP ……………………………………………………………………………… |
2-575 |
|
036-730 Fax Parameter RAP……………………………………………………………………………… |
2-550 |
036-782 Fax Parameter RAP ……………………………………………………………………………… |
2-576 |
|
036-731 Fax Parameter RAP……………………………………………………………………………… |
2-550 |
036-783 Fax Parameter RAP ……………………………………………………………………………… |
2-576 |
|
036-732 Fax Parameter RAP……………………………………………………………………………… |
2-551 |
036-784 Fax Parameter RAP ……………………………………………………………………………… |
2-577 |
|
036-733 Fax Parameter RAP……………………………………………………………………………… |
2-551 |
036-785 Fax Parameter RAP ……………………………………………………………………………… |
2-577 |
|
036-734 Fax Parameter RAP……………………………………………………………………………… |
2-552 |
036-786 Fax Parameter RAP ……………………………………………………………………………… |
2-578 |
|
036-735 Fax Parameter RAP……………………………………………………………………………… |
2-552 |
036-787 Fax Parameter RAP ……………………………………………………………………………… |
2-578 |
|
036-736 Fax Parameter RAP……………………………………………………………………………… |
2-553 |
036-788 Fax Parameter RAP ……………………………………………………………………………… |
2-579 |
|
036-737 Fax Parameter RAP……………………………………………………………………………… |
2-553 |
036-789 Fax Parameter RAP ……………………………………………………………………………… |
2-579 |
|
036-738 Fax Parameter RAP……………………………………………………………………………… |
2-554 |
036-790 Fax Parameter RAP ……………………………………………………………………………… |
2-580 |
|
036-739 Fax Parameter RAP……………………………………………………………………………… |
2-554 |
036-791 Fax Parameter RAP ……………………………………………………………………………… |
2-580 |
|
036-740 Fax Parameter RAP……………………………………………………………………………… |
2-555 |
036-792 Fax Parameter RAP ……………………………………………………………………………… |
2-581 |
|
036-741 Fax Parameter RAP……………………………………………………………………………… |
2-555 |
036-793 Fax Parameter RAP ……………………………………………………………………………… |
2-581 |
|
036-742 Fax Parameter RAP……………………………………………………………………………… |
2-556 |
036-794 Fax Parameter RAP ……………………………………………………………………………… |
2-582 |
|
036-743 Fax Parameter RAP……………………………………………………………………………… |
2-556 |
036-795 Fax Parameter RAP ……………………………………………………………………………… |
2-582 |
|
036-744 Fax Parameter RAP……………………………………………………………………………… |
2-557 |
036-796 Fax Parameter RAP ……………………………………………………………………………… |
2-583 |
|
Status-indicator-raps |
January 2007 |
Revision |
|
|
2-10 |
WorkCentre 7132 |
|
036-797 Fax Parameter RAP……………………………………………………………………………… |
2-583 |
061-325 SOS RAP ……………………………………………………………………………………………. |
2-608 |
|
|
036-798 Fax Parameter RAP……………………………………………………………………………… |
2-584 |
061-333 ROS Fan defect RAP……………………………………………………………………………. |
2-608 |
|
|
036-799 Fax Parameter RAP……………………………………………………………………………… |
2-584 |
061-344 Video Processor RAP …………………………………………………………………………… |
2-609 |
|
|
041 NVM |
061-345 +5 VDC Interlock RAP ………………………………………………………………………….. |
2-609 |
||
|
062 IIT |
||||
|
041-310 IM Logic Failure …………………………………………………………………………………… |
2-585 |
|||
|
041-311 MCU PWB Fuse F2 ……………………………………………………………………………… |
2-585 |
062-210 IIT Hot Line RAP ………………………………………………………………………………….. |
2-611 |
|
|
041-312 MCU PWB Fuse F1 ……………………………………………………………………………… |
2-586 |
062-211 IIT/IPS PWB EEPROM RAP………………………………………………………………….. |
2-611 |
|
|
041-314 MCU PWB Fuse FA ……………………………………………………………………………… |
2-586 |
062-220 IIT/IPS PWB to ESS PWB RAP ……………………………………………………………… |
2-612 |
|
|
041-319 MCU PWB Interlock Fuse F4…………………………………………………………………. |
2-587 |
062-277 IIT/IPS PWB DADF PWB Communication RAP………………………………………… |
2-612 |
|
|
041-320 MCU PWB Interlock Fuse F3…………………………………………………………………. |
2-587 |
062-278 IIT/IPS PWB RAP…………………………………………………………………………………. |
2-613 |
|
|
041-323 MCU PWB Fuse F5 ……………………………………………………………………………… |
2-588 |
062-300 Platen Interlock Open RAP ……………………………………………………………………. |
2-613 |
|
|
041-340 MCU PWB Data RAP……………………………………………………………………………. |
2-588 |
062-310 IIT/IPS PWB Controller Communication RAP …………………………………………… |
2-614 |
|
|
041-341 MCU PWB Access RAP………………………………………………………………………… |
2-589 |
062-311 IIT/IPS Software RAP……………………………………………………………………………. |
2-614 |
|
|
041-342 MCU PWB Buffer RAP………………………………………………………………………….. |
2-589 |
062-345 IIT/IPS Subsystem RAP ………………………………………………………………………… |
2-615 |
|
|
041-500 …………………………………………………………………………………………………………… |
2-590 |
062-357 CCD Fan Failure RAP…………………………………………………………………………… |
2-615 |
|
|
041-501 …………………………………………………………………………………………………………… |
2-590 |
062-360 Carriage Position RAP ………………………………………………………………………….. |
2-616 |
|
|
042 Drives |
062-362 IIT/IPS PWB RAP…………………………………………………………………………………. |
2-617 |
||
|
062-371 Lamp Illumination RAP |
2-617 |
|||
|
042-311 Auger Motor Failure RAP |
2-591 |
|||
|
062-380 Platen AGC CH1 RAP |
2-618 |
|||
|
042-313 Rear Cooling Fan Failure RAP |
2-591 |
|||
|
062-386 Platen AOC CH1 RAP |
2-618 |
|||
|
042-324 Drum Motor Drive Failure RAP |
2-592 |
|||
|
062-389 Carriage Over Run RAP |
2-619 |
|||
|
042-325 Main Motor Failure RAP |
2-592 |
|||
|
062-392 IIT/IPS PWB Memory Failure-1 RAP |
2-619 |
|||
|
042-400 Filter Life RAP |
2-593 |
|||
|
062-393 IIT/IPS PWB RAM RAP |
2-620 |
|||
|
045 Marking |
062-500 IISS ROM RAP…………………………………………………………………………………….. |
2-620 |
||
|
062-790 Prohibited Document Detection RAP |
2-621 |
|||
|
045-310 Image RAP |
2-595 |
|||
|
045-311 Controller Communications RAP ……………………………………………………………. |
2-595 |
063 EXT PWB |
||
|
045-321 Marking Panel RAP………………………………………………………………………………. |
2-596 |
063-210 Extension EPROM RAP |
2-623 |
|
|
045-322 Marking Pitch RAP |
2-596 |
|||
|
063-220 IIT/IPS PWB Extension PWB Sync RAP |
2-623 |
|||
|
045-323 Marking Y RAP |
2-597 |
|||
|
063-230 Extension PWB DIMM RAP |
2-624 |
|||
|
045-324 Marking M RAP |
2-597 |
|||
|
063-240 Extension PWB Processing RAP |
2-624 |
|||
|
045-325 Marking C RAP |
2-598 |
|||
|
063-500 IISS Extension ROM RAP |
2-625 |
|||
|
045-326 Marking K RAP |
2-598 |
|||
|
065 CIS |
||||
|
045-327 Marking Y RAP ……………………………………………………………………………………. |
2-599 |
|||
|
045-328 Marking M RAP……………………………………………………………………………………. |
2-599 |
065-210 Extension PWB DIMM RAP …………………………………………………………………… |
2-627 |
|
|
045-329 Marking C RAP ……………………………………………………………………………………. |
2-600 |
065-211 CIS Flash ROM RAP…………………………………………………………………………….. |
2-627 |
|
|
045-330 Marking K RAP ……………………………………………………………………………………. |
2-600 |
065-212 CIS Shading RAP…………………………………………………………………………………. |
2-628 |
|
|
045-331 Marking Reject RAP……………………………………………………………………………… |
2-601 |
065-213 CIS Light RAP ……………………………………………………………………………………… |
2-628 |
|
|
045-332 Marking Reject RAP……………………………………………………………………………… |
2-601 |
065-215 Extension PWB DIMM 2 RAP ………………………………………………………………… |
2-629 |
|
|
045-333 Marking Communication RAP………………………………………………………………… |
2-602 |
065-216 Extension PWB DIMM 3 RAP ………………………………………………………………… |
2-629 |
|
|
045-334 Marking Drive Communication RAP ……………………………………………………….. |
2-602 |
065-219 CIS Black/White RAP……………………………………………………………………………. |
2-630 |
|
|
045-335 Marking Fuser Communication RAP……………………………………………………….. |
2-603 |
065-220 IF PWB Sync RAP ……………………………………………………………………………….. |
2-630 |
|
|
045-336 Marking ROS Communication RAP ………………………………………………………… |
2-603 |
071 Tray 1 |
||
|
045-337 Marking Imaging Communication RAP |
2-604 |
|||
|
071-100 Tray 1 Pre Feed RAP |
2-631 |
|||
|
047 Communication |
||||
|
071-101 Tray 1 Misfeed RAP ……………………………………………………………………………… |
2-632 |
|||
|
047-211 OCT 2 RAP …………………………………………………………………………………………. |
2-605 |
071-105 Registration Sensor RAP ………………………………………………………………………. |
2-633 |
|
|
047-214 MCU Duplex Module RAP …………………………………………………………………….. |
2-605 |
071-211 Tray 1 RAP………………………………………………………………………………………….. |
2-634 |
|
|
047-216 MCU Finisher Communication RAP………………………………………………………… |
2-606 |
071-212 Tray 1 Ready RAP ……………………………………………………………………………….. |
2-634 |
|
|
061 ROS |
071-210 Tray 1 Lift Up RAP ……………………………………………………………………………….. |
2-635 |
||
|
071-401 Tray 1 Feed Roll Life RAP |
2-636 |
|||
|
061-320 ROS Motor RAP |
2-607 |
|||
|
071-402 Tray 1 Feed Roll Replacement RAP |
2-637 |
|||
|
Revision |
January 2007 |
Status-indicator-raps |
||
|
WorkCentre 7132 |
2-11 |
|
071-900 |
Tray 1 |
Feed Out Sensor RAP ………………………………………………………………… |
2-638 |
|
071-940 |
Tray 1 |
Lift Up RAP ……………………………………………………………………………….. |
2-639 |
072 Tray 2
|
072-100 Tray 2 |
Pre Feed RAP……………………………………………………………………………. |
2-641 |
|
|
072-101 Tray 2 |
Misfeed Jam RAP ………………………………………………………………………. |
2-642 |
|
|
072-102 Tray 2 |
Feed Out Sensor On Jam (Tray 3 Feed) RAP………………………………… |
2-643 |
|
|
072-105 Tray 2 |
Registration Sensor On Jam RAP ………………………………………………… |
2-644 |
|
|
072-210 Tray 2 |
Lift Up RAP ……………………………………………………………………………….. |
2-645 |
|
|
072-211 Tray 2 |
RAP …………………………………………………………………………………………. |
2-646 |
|
|
072-212 Tray 2 |
Ready RAP ……………………………………………………………………………….. |
2-647 |
|
|
072-401 |
Tray 2 |
Feed Roll Life RAP …………………………………………………………………….. |
2-648 |
|
072-402 |
Tray 2 |
Feed Roll Replacement RAP……………………………………………………….. |
2-649 |
|
072-900 |
Tray 2 |
Feed Out Sensor Jam RAP …………………………………………………………. |
2-650 |
|
072-940 |
Tray 2/TTM 2 Lift Up RAP……………………………………………………………………… |
2-651 |
073 Tray 3
|
073-100 Tray 3 |
Pre Feed RAP……………………………………………………………………………. |
2-653 |
|
|
073-101 Tray 3 |
Misfeed Jam RAP ………………………………………………………………………. |
2-654 |
|
|
073-102 Tray 3 |
Feed Out Sensor On Jam RAP ……………………………………………………. |
2-656 |
|
|
073-105 Tray 3 |
Registration Sensor On Jam RAP ………………………………………………… |
2-657 |
|
|
073-210 Tray 3 |
Lift Up RAP ……………………………………………………………………………….. |
2-658 |
|
|
073-211 Tray 3 |
RAP …………………………………………………………………………………………. |
2-659 |
|
|
073-212 Tray 3 |
Ready RAP ……………………………………………………………………………….. |
2-660 |
|
|
073-401 |
Tray 3 |
Feed Roll Life RAP …………………………………………………………………….. |
2-661 |
|
073-402 |
Tray 3 |
Feed Roll Replacement RAP……………………………………………………….. |
2-662 |
|
073-900 |
Tray 3 |
Feed Out Sensor On Jam RAP ……………………………………………………. |
2-663 |
|
073-940 |
Tray 3/TTM 3 Lift Up RAP……………………………………………………………………… |
2-664 |
075 MPT
|
075-135 |
MSI Registration Sensor On Jam RAP ……………………………………………………. |
2-665 |
|
075-401 |
MSI Feed Roll Life RAP ………………………………………………………………………… |
2-666 |
|
075-402 |
MSI Feed Roll Replacement RAP…………………………………………………………… |
2-667 |
077 Paper Transport-Covers
|
077-101 Registration Sensor Off Jam RAP ………………………………………………………….. |
2-669 |
||
|
077-103 Exit Sensor 1 |
Off Jam (too long) RAP …………………………………………………….. |
2-670 |
|
|
077-104 Exit Sensor 1 |
Off Jam (too short) RAP ……………………………………………………. |
2-670 |
|
|
077-105 Exit Sensor 2 |
Off Jam RAP……………………………………………………………………. |
2-671 |
|
|
077-106 Exit Sensor 1 |
On Jam RAP……………………………………………………………………. |
2-672 |
|
|
077-108 Exit Gate Jam RAP ………………………………………………………………………………. |
2-672 |
||
|
077-109 IOT Exit Sensor 2 On Jam RAP……………………………………………………………… |
2-673 |
||
|
077-110 POB Sensor On Jam RAP …………………………………………………………………….. |
2-674 |
||
|
077-123 Registration Sensor On Jam RAP ………………………………………………………….. |
2-675 |
||
|
077-130 Duplex Out Sensor On Jam RAP……………………………………………………………. |
2-676 |
||
|
077-131 Duplex Wait Sensor On Jam RAP ………………………………………………………….. |
2-677 |
||
|
077-215 Tray Module Communication RAP………………………………………………………….. |
2-678 |
||
|
077-300 IOT Front Cover Open RAP…………………………………………………………………… |
2-679 |
||
|
077-301 Left Hand Interlock Open RAP……………………………………………………………….. |
2-680 |
||
|
077-305 |
Tray Module Left Hand Cover Interlock Open RAP …………………………………… |
2-681 |
|
|
077-307 |
DUP Cover Open RAP………………………………………………………………………….. |
2-682 |
|
|
077-308 |
Left Hand High Interlock Open RAP ……………………………………………………….. |
2-683 |
|
|
077-309 |
Left Hand Low Interlock Open RAP ………………………………………………………… |
2-684 |
|
077-314 Tray Module Logic RAP ………………………………………………………………………… |
2-685 |
|
|
077-602 OHP Sensor RAP…………………………………………………………………………………. |
2-685 |
|
|
077-900 |
Tray/Registration Sensor Jam RAP ………………………………………………………… |
2-686 |
|
077-901 |
Fuser Exit Sensor Jam RAP ………………………………………………………………….. |
2-687 |
|
077-902 Exit Sensor 2 On Jam RAP……………………………………………………………………. |
2-688 |
|
|
077-903 POB Sensor JAM RAP………………………………………………………………………….. |
2-689 |
|
|
077-907 |
Duplex Wait Sensor RAP………………………………………………………………………. |
2-690 |
|
077-967 |
Paper Kind Mismatch RAP…………………………………………………………………….. |
2-690 |
|
077-968 Paper Type Changed RAP…………………………………………………………………….. |
2-691 |
078 Controller
|
078-210 TTM Tray 2 |
Lift RAP …………………………………………………………………………….. |
2-693 |
|
|
078-211 |
TTM Tray 3 |
Lift RAP …………………………………………………………………………….. |
2-694 |
|
078-500 |
Write to HCF-ROM error detection (During DLD method) ………………………….. |
2-695 |
|
|
078-940 |
Tray Lift RAP……………………………………………………………………………………….. |
2-695 |
|
|
078-941 |
TTM Tray 3 |
Lift RAP …………………………………………………………………………….. |
2-697 |
081 Fax Destination
|
081-799 Registered Destination RAP ………………………………………………………………….. |
2-699 |
089 Belt/BTR
|
089-311 IOT |
Belt Home RAP ……………………………………………………………………………… |
2-701 |
|
|
089-312 IOT |
Belt Home RAP ……………………………………………………………………………… |
2-701 |
|
|
089-630 |
IOT Belt Speed RAP …………………………………………………………………………….. |
2-702 |
|
|
089-631 |
Belt Slip RAP……………………………………………………………………………………….. |
2-702 |
|
|
089-632 |
IBT Belt Cleaner RAP …………………………………………………………………………… |
2-703 |
|
|
089-633 |
2nd BTR RAP………………………………………………………………………………………. |
2-703 |
091 Drum
|
091-313 Xero CRUM Communication RAP ………………………………………………………….. |
2-705 |
|
|
091-400 Waste Toner Near Full RAP…………………………………………………………………… |
2-705 |
|
|
091-402 Drum Life Over RAP …………………………………………………………………………….. |
2-706 |
|
|
091-441 Drum Life Near End of Life RAP …………………………………………………………….. |
2-706 |
|
|
091-910 Waste Toner Bottle Position RAP …………………………………………………………… |
2-707 |
|
|
091-911 |
Waste Toner Full RAP ………………………………………………………………………….. |
2-707 |
|
091-912 |
Xerographics Drum Module Installation RAP……………………………………………. |
2-708 |
|
091-914 Xero CRUM Comm RAP……………………………………………………………………….. |
2-708 |
|
|
091-915 Xero CRUM Data RAP………………………………………………………………………….. |
2-709 |
|
|
091-916 Xero CRUM Match RAP………………………………………………………………………… |
2-709 |
|
|
091-921 |
Xerographics Drum Module Installation RAP……………………………………………. |
2-710 |
|
091-935 |
Xero Drum Cartridge End of Life RAP …………………………………………………….. |
2-710 |
092 Process Control
|
092-310 ADC Sensor RAP…………………………………………………………………………………. |
2-711 |
|
|
092-934 Print Count RAP…………………………………………………………………………………… |
2-711 |
|
|
092-649 ADC Shutter Open RAP………………………………………………………………………… |
2-712 |
|
|
092-650 |
ADC Shutter Close RAP ……………………………………………………………………….. |
2-712 |
|
092-651 |
ADC Shutter Clean RAP ……………………………………………………………………….. |
2-713 |
|
092-661 |
Temperature Sensor RAP……………………………………………………………………… |
2-713 |
|
092-662 |
Humidity Sensor RAP …………………………………………………………………………… |
2-714 |
093 Toner Supply
|
093-310 Rotary Position Failure………………………………………………………………………….. |
2-715 |
|
Status-indicator-raps |
January 2007 |
Revision |
|
2-12 |
WorkCentre 7132 |
|
093-311 Rotary Assembly Failure……………………………………………………………………….. |
2-715 |
|
093-320 Developer Motor Failure RAP ………………………………………………………………… |
2-716 |
|
093-400 Black Toner Near Empty……………………………………………………………………….. |
2-716 |
|
093-406 Black Toner Pre-Near Empty …………………………………………………………………. |
2-717 |
|
093-407 Y Toner Pre-Near Empty ………………………………………………………………………. |
2-717 |
|
093-408 M Toner Pre-Near Empty………………………………………………………………………. |
2-718 |
|
093-409 C Toner Pre-Near Empty ………………………………………………………………………. |
2-718 |
|
093-414 Y Developer Housing is near End of Life …………………………………………………. |
2-719 |
|
093-415 M Developer Housing is near End of Life ………………………………………………… |
2-719 |
|
093-416 C Developer Housing is near End of Life…………………………………………………. |
2-720 |
|
093-417 K Developer Housing is near End of Life …………………………………………………. |
2-720 |
|
093-418 Y Developer Housing is Over End of Life ………………………………………………… |
2-721 |
|
093-419 M Developer Housing is Over End of Life………………………………………………… |
2-721 |
|
093-420 C Developer Housing is Over End of Life ………………………………………………… |
2-722 |
|
093-421 K Developer Housing is Over End of Life ………………………………………………… |
2-722 |
|
093-423 Y Toner Near Empty …………………………………………………………………………….. |
2-723 |
|
093-424 M Toner Near Empty…………………………………………………………………………….. |
2-723 |
|
093-425 C Toner Near Empty …………………………………………………………………………….. |
2-724 |
|
093-912 Black Toner Empty……………………………………………………………………………….. |
2-724 |
|
093-916 Toner K CRUM not in position Failure …………………………………………………….. |
2-725 |
|
093-924 Toner K Crum Communication Failure ……………………………………………………. |
2-725 |
|
093-925 Toner K Crum Data Broken Failure ………………………………………………………… |
2-726 |
|
093-926 Toner K Crum Data Mismatch Failure …………………………………………………….. |
2-726 |
|
093-940 Toner Y CRUM Communication Failure ………………………………………………….. |
2-727 |
|
093-941 Toner M CRUM Communication Failure………………………………………………….. |
2-727 |
|
093-942 Toner C CRUM Communication Failure ………………………………………………….. |
2-728 |
|
093-950 Toner Y CRUM Data Broken Failure ………………………………………………………. |
2-728 |
|
093-951 Toner M CRUM Data Broken Failure………………………………………………………. |
2-729 |
|
093-952 Toner C CRUM Data Broken Failure ………………………………………………………. |
2-729 |
|
093-960 Toner Y CRUM Data Mismatch Failure …………………………………………………… |
2-730 |
|
093-961 Toner M CRUM Data Mismatch Failure…………………………………………………… |
2-730 |
|
093-962 Toner C CRUM Data Mismatch Failure …………………………………………………… |
2-731 |
|
093-970 Toner Y CRUM not in position Failure …………………………………………………….. |
2-731 |
|
093-971 Toner M CRUM not in position Failure…………………………………………………….. |
2-732 |
|
093-972 Toner C CRUM not in position Failure …………………………………………………….. |
2-732 |
094 BTR/IBT
|
094-320 2nd BTR Retract RAP…………………………………………………………………………… |
2-733 |
|
|
094-321 2nd BTR Contact RAP ………………………………………………………………………….. |
2-733 |
|
|
094-322 2nd BTR Retract RAP…………………………………………………………………………… |
2-734 |
|
|
094-323 2nd BTR Contact RAP ………………………………………………………………………….. |
2-734 |
|
|
094-417 IBT Near End of Life RAP ……………………………………………………………………… |
2-735 |
|
|
094-418 IBT Cleaner Near End of Life RAP …………………………………………………………. |
2-735 |
|
|
094-419 |
2nd BTR Near End of Life RAP ……………………………………………………………… |
2-736 |
|
094-420 |
IBT End of Life RAP……………………………………………………………………………… |
2-736 |
|
094-421 |
IBT Cleaner End of Life RAP …………………………………………………………………. |
2-737 |
|
094-422 |
2nd BTR End of Life RAP ……………………………………………………………………… |
2-737 |
102 User Interface
|
102-356 |
Controller Software RAP……………………………………………………………………….. |
2-739 |
|
102-380 |
UI Control RAP ……………………………………………………………………………………. |
2-739 |
|
102-381 |
UI Data Link RAP…………………………………………………………………………………. |
2-740 |
|
102-382 Application Layer Command RAP…………………………………………………………… |
2-740 |
116 Printing Control
|
116-220 …………………………………………………………………………………………………………… |
2-741 |
|
116-310 ESS Font DIMM #2 RAP……………………………………………………………………….. |
2-741 |
|
116-311 ESS Font DIMM #3 RAP……………………………………………………………………….. |
2-742 |
|
116-312 HDD Encrypt Key RAP………………………………………………………………………….. |
2-742 |
|
116-313 HDD Encrypt Setup RAP ………………………………………………………………………. |
2-743 |
|
116-314 Ethernet Address RAP………………………………………………………………………….. |
2-743 |
|
116-315 ESS DDR DIMM #1 R/W Check RAP ……………………………………………………… |
2-744 |
|
116-316 ESS DDR DIMM #2 R/W Check RAP ……………………………………………………… |
2-744 |
|
116-317 ESS ROM DIMM #1 Check RAP ……………………………………………………………. |
2-745 |
|
116-318 ESS ROM DIMM #2 Check RAP ……………………………………………………………. |
2-745 |
|
116-319 Controller UI Configuration…………………………………………………………………….. |
2-746 |
|
116-321 System Software RAP…………………………………………………………………………… |
2-746 |
|
116-322 WebDAV S/W Fail RAP ………………………………………………………………………… |
2-747 |
|
116-323 ESS NVRAM R/W Check RAP ………………………………………………………………. |
2-747 |
|
116-324 System Controller RAP …………………………………………………………………………. |
2-748 |
|
116-325 ESS Fan RAP ……………………………………………………………………………………… |
2-748 |
|
116-328 Controller Cache RAP…………………………………………………………………………… |
2-749 |
|
116-329 Serial Software RAP …………………………………………………………………………….. |
2-749 |
|
116-330 HDD File System RAP ………………………………………………………………………….. |
2-750 |
|
116-331 Invalid Log Information RAP ………………………………………………………………….. |
2-750 |
|
116-332 ESS ROM RAP ……………………………………………………………………………………. |
2-751 |
|
116-333 LocalTalk Software RAP ……………………………………………………………………….. |
2-751 |
|
116-334 ESS NVRAM Data Compare Fail RAP ……………………………………………………. |
2-752 |
|
116-335 HDD RAP……………………………………………………………………………………………. |
2-752 |
|
116-336 HDD Access RAP ………………………………………………………………………………… |
2-753 |
|
116-337 SNTP Software RAP …………………………………………………………………………….. |
2-753 |
|
116-338 JBA RAP …………………………………………………………………………………………….. |
2-754 |
|
116-340 Memory RAP……………………………………………………………………………………….. |
2-754 |
|
116-341 ROM Version RAP ……………………………………………………………………………….. |
2-755 |
|
116-342 Network Manager RAP …………………………………………………………………………. |
2-755 |
|
116-343 Main PWB IC RAP ……………………………………………………………………………….. |
2-756 |
|
116-346 Formatter RAP …………………………………………………………………………………….. |
2-756 |
|
116-348 Redirector RAP ……………………………………………………………………………………. |
2-757 |
|
116-349 SIF RAP ……………………………………………………………………………………………… |
2-757 |
|
116-350 AppleTalk Software RAP……………………………………………………………………….. |
2-758 |
|
116-351 Ether Talk Software RAP ………………………………………………………………………. |
2-758 |
|
116-352 NetWare Software RAP ………………………………………………………………………… |
2-759 |
|
116-353 HDD Mechanical RAP…………………………………………………………………………… |
2-759 |
|
116-354 HDD Product RAP………………………………………………………………………………… |
2-760 |
|
116-355 Agent Software RAP …………………………………………………………………………….. |
2-760 |
|
116-356 HDD Format RAP…………………………………………………………………………………. |
2-761 |
|
116-357 PostScript RAP ……………………………………………………………………………………. |
2-761 |
|
116-358 Salutation Software RAP……………………………………………………………………….. |
2-762 |
|
116-359 Software RAP………………………………………………………………………………………. |
2-762 |
|
116-360 SMB Software RAP………………………………………………………………………………. |
2-763 |
|
116-361 Spool HDD RAP…………………………………………………………………………………… |
2-763 |
|
116-362 SSDP Software RAP…………………………………………………………………………….. |
2-764 |
|
116-363 Print Service Software RAP …………………………………………………………………… |
2-764 |
|
116-364 Timer RAP…………………………………………………………………………………………… |
2-765 |
|
Revision |
January 2007 |
Status-indicator-raps |
|
WorkCentre 7132 |
2-13 |
|
116-365 Spool RAP ………………………………………………………………………………………….. |
2-765 |
|
116-366 Software Report RAP……………………………………………………………………………. |
2-766 |
|
116-367 Parallel Software RAP ………………………………………………………………………….. |
2-766 |
|
116-368 Dump Print RAP…………………………………………………………………………………… |
2-767 |
|
116-370 XJCL RAP…………………………………………………………………………………………… |
2-767 |
|
116-371 PCL Decomposer Software RAP ……………………………………………………………. |
2-768 |
|
116-372 Formatter RAP …………………………………………………………………………………….. |
2-768 |
|
116-373 Dynamic DNS Software RAP…………………………………………………………………. |
2-769 |
|
116-374 Auto Switch RAP………………………………………………………………………………….. |
2-769 |
|
116-375 Formatter RAP …………………………………………………………………………………….. |
2-770 |
|
116-376 Port 9100 Software RAP……………………………………………………………………….. |
2-770 |
|
116-377 Video DMA RAP ………………………………………………………………………………….. |
2-771 |
|
116-378 Controller Software RAP……………………………………………………………………….. |
2-771 |
|
116-379 Controller Software RAP……………………………………………………………………….. |
2-772 |
|
116-380 ESS Font ROM DIMM #1 RAP ………………………………………………………………. |
2-772 |
|
116-381 ABL Initialize RAP………………………………………………………………………………… |
2-773 |
|
116-382 ABL Initialize RAP………………………………………………………………………………… |
2-773 |
|
116-383 PIT Lib Failure RAP ……………………………………………………………………………… |
2-774 |
|
116-385 IDC Software RAP ……………………………………………………………………………….. |
2-774 |
|
116-388 MCC RAP …………………………………………………………………………………………… |
2-775 |
|
116-389 RAM Install RAP ………………………………………………………………………………….. |
2-775 |
|
116-390 ROM NVM Mismatch RAP…………………………………………………………………….. |
2-776 |
|
116-391 Country Code RAP ………………………………………………………………………………. |
2-776 |
|
116-395 USB Software RAP ………………………………………………………………………………. |
2-777 |
|
116-399 Initialization RAP………………………………………………………………………………….. |
2-777 |
|
116-701 Memory Duplex RAP ……………………………………………………………………………. |
2-778 |
|
116-702 Substitute Font RAP …………………………………………………………………………….. |
2-778 |
|
116-703 PostScript Language RAP …………………………………………………………………….. |
2-779 |
|
116-710 HP-GL/2 Memory Overflow RAP ……………………………………………………………. |
2-779 |
|
116-711 Size/Orientation Mismatch RAP……………………………………………………………… |
2-780 |
|
116-712 Form Registration RAP …………………………………………………………………………. |
2-780 |
|
116-713 HDD Job Full RAP ……………………………………………………………………………….. |
2-781 |
|
116-714 HP-GL/2 Command RAP ………………………………………………………………………. |
2-781 |
|
116-715 Max Form to PLW Registered RAP ………………………………………………………… |
2-782 |
|
116-718 Selected PLW Form Not Registered RAP ……………………………………………….. |
2-782 |
|
116-720 PCL Memory RAP………………………………………………………………………………… |
2-783 |
|
116-725 The log image storage area full RAP ………………………………………………………. |
2-783 |
|
116-737 Registration RAP …………………………………………………………………………………. |
2-784 |
|
116-738 Overlay Size Orientation RAP………………………………………………………………… |
2-784 |
|
116-739 Form/Logo Capacity RAP ……………………………………………………………………… |
2-785 |
|
116-740 Arithmetic RAP…………………………………………………………………………………….. |
2-785 |
|
116-741 Maximum Forms Data Register RAP………………………………………………………. |
2-786 |
|
116-742 Max Logo Registered RAP ……………………………………………………………………. |
2-786 |
|
116-743 Form/Logo Size Overflow RAP ………………………………………………………………. |
2-787 |
|
116-745 ART Command RAP…………………………………………………………………………….. |
2-787 |
|
116-746 Selected Form RAP ……………………………………………………………………………… |
2-788 |
|
116-747 Invalid Page Margin RAP………………………………………………………………………. |
2-788 |
|
116-748 Page Image Data RAP………………………………………………………………………….. |
2-789 |
|
116-749 PostScript Font RAP …………………………………………………………………………….. |
2-789 |
|
116-752 Print Job Ticket Description Warning RAP ………………………………………………. |
2-790 |
|
116-771 Invalid JBIG Parameter DL Fixed RAP ……………………………………………………. |
2-790 |
|
116-772 Invalid JBIG Parameter D Fixed RAP ……………………………………………………… |
2-791 |
|
116-773 Invalid JBIG Parameter |
P Fixed RAP ……………………………………………………… |
2-791 |
|
|
116-774 Invalid JBIG Parameter |
YD Fixed RAP……………………………………………………. |
2-792 |
|
|
116-775 Invalid JBIG Parameter |
L0 Fixed RAP…………………………………………………….. |
2-792 |
|
|
116-776 Invalid JBIG Parameter |
MX Fixed RAP …………………………………………………… |
2-793 |
|
|
116-777 |
Invalid JBIG Parameter MY Fixed RAP …………………………………………………… |
2-793 |
|
|
116-778 |
Invalid JBIG Par VLength Fixed RAP………………………………………………………. |
2-794 |
|
|
116-780 |
Attached Document RAP ………………………………………………………………………. |
2-794 |
|
|
116-790 |
Stapling Canceled RAP |
…………………………………………………………………………. |
2-795 |
121 FID-EP
|
121-310 EPSV-Accessory Communication HDD RAP……………………………………………. |
2-797 |
|
|
121-333 EPSV-EP M/C Communication HDD RAP……………………………………………….. |
2-797 |
|
|
121-334 EPSV Login HDD RAP………………………………………………………………………….. |
2-798 |
|
|
121-335 EPSV Wake Up Answer HDD RAP…………………………………………………………. |
2-798 |
|
|
121-336 Unknown EP Accessory RAP ………………………………………………………………… |
2-799 |
|
|
121-337 |
EP Accessory Self Diagnostic HDD RAP…………………………………………………. |
2-799 |
|
121-338 EPSV Answer Time Out RAP ………………………………………………………………… |
2-800 |
|
|
121-339 |
Changed Price Table RAP …………………………………………………………………….. |
2-800 |
|
121-340 |
EP Accessory Mismatch RAP ………………………………………………………………… |
2-801 |
|
121-350 EPSV Logic HDD RAP………………………………………………………………………….. |
2-801 |
|
|
121-370 EP-DX RAP…………………………………………………………………………………………. |
2-802 |
123 Controller-UI
|
123-203 UI Controller RAP…………………………………………………………………………………. |
2-803 |
|
123-207 Communication Manager Target RAP …………………………………………………….. |
2-803 |
|
123-209 Controller UI Communication RAP………………………………………………………….. |
2-804 |
|
123-310 Send Queue RAP…………………………………………………………………………………. |
2-804 |
|
123-311 Receive Queue RAP …………………………………………………………………………….. |
2-805 |
|
123-317 Receive Message Queue RAP ………………………………………………………………. |
2-805 |
|
123-318 Receive Finish Queue RAP …………………………………………………………………… |
2-806 |
|
123-322 UI Target RAP……………………………………………………………………………………… |
2-806 |
|
123-323 UI Address RAP…………………………………………………………………………………… |
2-807 |
|
123-325 Object Creation RAP…………………………………………………………………………….. |
2-807 |
|
123-326 Memory Overflow RAP………………………………………………………………………….. |
2-808 |
|
123-327 Button Overflow RAP ……………………………………………………………………………. |
2-808 |
|
123-328 UI Internal Range RAP………………………………………………………………………….. |
2-809 |
|
123-329 UI Coordinates RAP……………………………………………………………………………… |
2-809 |
|
123-332 Interface Parameter RAP………………………………………………………………………. |
2-810 |
|
123-333 Interface Communication RAP……………………………………………………………….. |
2-810 |
|
123-337 Frame Data RAP………………………………………………………………………………….. |
2-811 |
|
123-341 Event Queue RAP………………………………………………………………………………… |
2-811 |
|
123-342 Event Queue RAP………………………………………………………………………………… |
2-812 |
|
123-343 Invalid Class RAP ………………………………………………………………………………… |
2-812 |
|
123-344 Invalid Type RAP …………………………………………………………………………………. |
2-813 |
|
123-345 Timer Queue Full RAP………………………………………………………………………….. |
2-813 |
|
123-346 Invalid Timer Number RAP ……………………………………………………………………. |
2-814 |
|
123-350 Privilege Command RAP ………………………………………………………………………. |
2-814 |
|
123-362 Object RAP …………………………………………………………………………………………. |
2-815 |
|
123-368 UI Memory RAP …………………………………………………………………………………… |
2-815 |
|
123-369 Interface Value RAP……………………………………………………………………………… |
2-816 |
|
123-370 Interface Length RAP……………………………………………………………………………. |
2-816 |
|
123-371 Interface Parameter RAP………………………………………………………………………. |
2-817 |
|
Status-indicator-raps |
January 2007 |
Revision |
|
2-14 |
WorkCentre 7132 |
|
123-372 Interface Sequence RAP ………………………………………………………………………. |
2-817 |
|
123-373 Channel RAP ………………………………………………………………………………………. |
2-818 |
|
123-374 User Job ID RAP………………………………………………………………………………….. |
2-818 |
|
123-375 Internal Resource RAP …………………………………………………………………………. |
2-819 |
|
123-376 Internal Memory RAP……………………………………………………………………………. |
2-819 |
|
123-377 UI Timer RAP………………………………………………………………………………………. |
2-820 |
|
123-378 Interface Format RAP …………………………………………………………………………… |
2-820 |
|
123-379 Dispatch RAP………………………………………………………………………………………. |
2-821 |
|
123-380 Copy Interface RAP ……………………………………………………………………………… |
2-821 |
|
123-381 Fax Interface RAP………………………………………………………………………………… |
2-822 |
|
123-382 Scanner Interface RAP …………………………………………………………………………. |
2-822 |
|
123-383 Report Interface RAP……………………………………………………………………………. |
2-823 |
|
123-384 Server Access RAP ……………………………………………………………………………… |
2-823 |
|
123-385 Service Object RAP ……………………………………………………………………………… |
2-824 |
|
123-386 Service Object RAP ……………………………………………………………………………… |
2-824 |
|
123-387 Service Object RAP ……………………………………………………………………………… |
2-825 |
|
123-388 Attribute RAP ………………………………………………………………………………………. |
2-825 |
|
123-389 UI Comparator RAP ……………………………………………………………………………… |
2-826 |
|
123-390 Job Parameter RAP ……………………………………………………………………………… |
2-826 |
|
123-391 Job Parameter RAP ……………………………………………………………………………… |
2-827 |
|
123-392 Auditron RAP ………………………………………………………………………………………. |
2-827 |
|
123-393 UI Compiling RAP ………………………………………………………………………………… |
2-828 |
|
123-394 File Access RAP ………………………………………………………………………………….. |
2-828 |
|
123-395 UI NVM RAP ……………………………………………………………………………………….. |
2-829 |
|
123-396 UI Software RAP………………………………………………………………………………….. |
2-829 |
|
123-397 UI Manager RAP………………………………………………………………………………….. |
2-830 |
|
123-398 Release Queue RAP…………………………………………………………………………….. |
2-830 |
|
123-399 UI Internal RAP ……………………………………………………………………………………. |
2-831 |
|
123-400 Internal Interface RAP…………………………………………………………………………… |
2-831 |
124 ROM-RAM
|
124-310 Product Designation RAP ……………………………………………………………………… |
2-833 |
|
124-311 Product Serial Number RAP ………………………………………………………………….. |
2-833 |
|
124-312 Machine Codes Mismatch RAP ……………………………………………………………… |
2-834 |
|
124-313 Serial Number RAP………………………………………………………………………………. |
2-834 |
|
124-314 IOT Speed RAP …………………………………………………………………………………… |
2-835 |
|
124-315 Serial Number Mismatch RAP ……………………………………………………………….. |
2-835 |
|
124-316 Product Mode RAP ………………………………………………………………………………. |
2-836 |
|
124-317 All Product Mode RAP ………………………………………………………………………….. |
2-836 |
|
124-318 Product Type Software Key RAP……………………………………………………………. |
2-837 |
|
124-319 All Product Types Software Key RAP ……………………………………………………… |
2-837 |
|
124-320 EPROM RAP ………………………………………………………………………………………. |
2-838 |
|
124-321 Backup SRAM RAP ……………………………………………………………………………… |
2-838 |
|
124-322 Software Key RAP ……………………………………………………………………………….. |
2-839 |
|
124-323 Software Key Registration RAP ……………………………………………………………… |
2-839 |
|
124-324 All Billings Mismatch RAP……………………………………………………………………… |
2-840 |
|
124-325 Billing Restoration RAP…………………………………………………………………………. |
2-840 |
|
124-333 ASIC RAP …………………………………………………………………………………………… |
2-841 |
|
124-334 Standard Font ROM RAP ……………………………………………………………………… |
2-841 |
|
124-335 Font ROM RAP ……………………………………………………………………………………. |
2-842 |
|
124-337 ESS Standard RAM RAP………………………………………………………………………. |
2-842 |
|
124-338 Duplicate Font ROMs RAP ……………………………………………………………………. |
2-843 |
|
124-339 ROM DIMM Mismatch RAP …………………………………………………………………… |
2-843 |
|
124-340 CRUM Market RAP………………………………………………………………………………. |
2-844 |
|
124-341 CRUM Market MCU RAP………………………………………………………………………. |
2-844 |
|
124-342 CRUM Market System 1 RAP ………………………………………………………………… |
2-845 |
|
124-343 CRUM Market System 2 RAP ………………………………………………………………… |
2-845 |
|
124-350 CRUM OEM RAP…………………………………………………………………………………. |
2-846 |
|
124-351 CRUM OEM MCU RAP…………………………………………………………………………. |
2-846 |
|
124-352 CRUM OEM System 1 RAP…………………………………………………………………… |
2-847 |
|
124-353 CRUM OEM System 2 RAP…………………………………………………………………… |
2-847 |
|
124-360 CRUM Validation RAP ………………………………………………………………………….. |
2-848 |
|
124-361 CRUM Validation MCU RAP………………………………………………………………….. |
2-848 |
|
124-362 CRUM Validation System 1 RAP ……………………………………………………………. |
2-849 |
|
124-363 CRUM validation System 2 RAP…………………………………………………………….. |
2-849 |
|
124-372 IOT Controller Software RAP …………………………………………………………………. |
2-850 |
|
124-373 IOT Manager Software RAP ………………………………………………………………….. |
2-850 |
|
124-374 IOT IM Device Driver Software RAP ……………………………………………………….. |
2-851 |
|
124-380 CRUM Market (2)…………………………………………………………………………………. |
2-851 |
|
124-381 CRUM Market MCU (2)…………………………………………………………………………. |
2-852 |
|
124-382 CRUM Market System 1 (2)…………………………………………………………………… |
2-852 |
|
124-383 CRUM Market System 2 (2)…………………………………………………………………… |
2-853 |
|
124-390 OEM Market (2)……………………………………………………………………………………. |
2-853 |
|
124-391 CRU OEM MCU (2)………………………………………………………………………………. |
2-854 |
|
124-392 CRU OEM System 1 (2)………………………………………………………………………… |
2-854 |
|
124-393 CRU OEM System 2 (2)………………………………………………………………………… |
2-855 |
|
124-701 Side Tray to Center Tray RAP ……………………………………………………………….. |
2-855 |
|
124-702 Finisher Tray to Center Tray RAP…………………………………………………………… |
2-856 |
|
124-709 Side Tray to Center Tray RAP ……………………………………………………………….. |
2-856 |
125 PWS cont
|
125-311 PSW Unexpected Fail RAP……………………………………………………………………. |
2-857 |
127 Software
|
127-310 ESR Task RAP…………………………………………………………………………………….. |
2-859 |
|
|
127-337 Job Template HDD Write RAP……………………………………………………………….. |
2-859 |
|
|
127-342 Job Template Monitor RAP ……………………………………………………………………. |
2-860 |
|
|
127-353 |
LPD Software RAP……………………………………………………………………………….. |
2-860 |
|
127-354 |
FTP Server Software RAP …………………………………………………………………….. |
2-861 |
|
127-396 |
Mail I/O Software RAP ………………………………………………………………………….. |
2-861 |
|
127-398 |
IPP Software RAP………………………………………………………………………………… |
2-862 |
|
127-399 JME Software RAP ………………………………………………………………………………. |
2-862 |
133 Fax Control
|
133-210 Fax Parameter RAP ……………………………………………………………………………… |
2-863 |
|
|
133-211 Fax Parameter Value Invalid RAP ………………………………………………………….. |
2-863 |
|
|
133-212 Fax Read ErrorNo Data RAP……………………………………………………………….. |
2-864 |
|
|
133-213 Fax Read ErrorInvalid Data RAP ………………………………………………………….. |
2-864 |
|
|
133-214 |
Fax USB Initializing RAP……………………………………………………………………….. |
2-865 |
|
133-215 Fax USB Device RAP …………………………………………………………………………… |
2-865 |
|
|
133-216 |
Fax USB Host Fatal RAP………………………………………………………………………. |
2-866 |
|
133-217 |
Fax Manager Short of Memory RAP ……………………………………………………….. |
2-866 |
|
133-218 |
Fax Card Message Library Short of Memory RAP…………………………………….. |
2-867 |
|
133-219 Fax Work Memory RAP ………………………………………………………………………… |
2-867 |
|
Revision |
January 2007 |
Status-indicator-raps |
|
WorkCentre 7132 |
2-15 |
|
133-220 Fax Control Task RAP ………………………………………………………………………….. |
2-868 |
|
|
133-221 Fax Card Boot RAP ……………………………………………………………………………… |
2-868 |
|
|
133-222 Fax Card does not respond intervalley RAP…………………………………………….. |
2-869 |
|
|
133-223 Fax Card Reset RAP ……………………………………………………………………………. |
2-869 |
|
|
133-224 Controller ROM Fax Card ROM RAP ……………………………………………………… |
2-870 |
|
|
133-226 Country Code RAP ………………………………………………………………………………. |
2-870 |
|
|
133-280 |
Fax Option Slot 1 Board RAP ………………………………………………………………… |
2-871 |
|
133-281 |
Received unknown message RAP………………………………………………………….. |
2-871 |
|
133-282 |
Fax Card Download RAP………………………………………………………………………. |
2-872 |
|
133-283 |
Fax Report Mailbox RAP ………………………………………………………………………. |
2-872 |
134 Fax Card
|
134-210 Fax Controller Parameter RAP ………………………………………………………………. |
2-873 |
|
134-211 FCB PWB RAP ……………………………………………………………………………………. |
2-873 |
202 Timer
|
202-399 Internal Timer RAP ………………………………………………………………………………. |
2-875 |
Other Faults
|
OF 1 Paper Size Mismatch In Width RAP…………………………………………………………….. |
2-877 |
|
|
OF 2 |
Size Switch Assy RAP ………………………………………………………………………………. |
2-878 |
|
OF 3 Main Drive Assy RAP………………………………………………………………………………… |
2-879 |
|
|
OF 4 |
Fuser Drive Assy RAP ………………………………………………………………………………. |
2-880 |
|
OF 5 |
Developer Motor RAP ……………………………………………………………………………….. |
2-881 |
|
OF 6 |
Dark / Blank Display RAP ………………………………………………………………………….. |
2-882 |
|
Status-indicator-raps |
January 2007 |
|
2-16 |
Power On RAP
BSD-ON:1.1
This procedure is used to determine the reason that the machine will not power up after the Main Power Switch is set to ON. Indications include a blank UI and no machine power up sounds (i.e. motors, relays, solenoids, beeps, etc…).
Initial Actions
•Ensure that the Customer’s circuit breaker is not tripped and that AC power is available at the power outlet that the machine will be using.
•Ensure that the power cord is seated correctly and is not damaged.
•If the machine GFI Circuit Breaker is tripped, try to reset it. If it trips again, switch the power off and unplug the power cord. Refer to wirenet 7.3.1 Wire Net AC POWER (HOT) and check for a short circuit in the AC wiring.
Procedure
Switch the machine Main Power Switch to ON. There is ACH between J11/T11-1(+) and
J12/T12-1(-) at the Power Unit. Y N
A B
+5V LED (CR3307) is lit on the ESS PWB.
YN
There is +5 VDC between P/J387-2(+) and P/J387-4(-) of the ESS PWB. Y N
Refer to BSD Chain 1 Standby Power and check for an open circuit in the wiring between the ESS PWB and the Power Unit. If the wiring is OK, replace the Power Unit (PL 11.1).
Replace the ESS PWB (PL 11.2).
Switch the power off and unplug the power cord. Verify that the power cord it good. If not, replace the power cord.
Refer to BSD Chain 1 Standby Power and check for an open circuit in the wiring between the GFI Breaker and the Power Unit. If the wiring is OK, replace the GFI Breaker (PL 11.1).
There is ACH between J1-3(+) and T12-1(-) at the Power Unit.
YN
Refer to BSD Chain 1 Standby Power and check for an open circuit in the wiring between J11/T11-1 and J1-3 of the Power Unit. If the wiring is OK, replace the Main Power Switch (PL 11.1).
+24V LED (CR3309) is lit on the ESS PWB.
YN
There is +24 VDC between P/J387-5(+) and P/J387-6(-) of the ESS PWB. Y N
Refer to BSD Chain 1 Standby Power and check for an open circuit in the wiring between the ESS PWB and the Power Unit. If the wiring is OK, replace the Power Unit (PL 11.1).
Replace the ESS PWB (PL 11.2).
+5V LED (CR3306) is lit on the ESS PWB.
YN
There is +5 VDC between P/J387-1(+) and P/J387-3(-) of the ESS PWB. Y N
Refer to BSD Chain 1 Standby Power and check for an open circuit in the wiring between the ESS PWB and the Power Unit. If the wiring is OK, replace the Power Unit (PL 11.1).
A B
|
Revision |
January 2007 |
Status-indicator-raps |
|
WorkCentre 7132 |
2-17 |
|
Status-indicator-raps |
January 2007 |
Revision |
002-770 Job Template Processing — HDD Full RAP
The system aborted a job due to insufficient HDD capacity during Job Template processing.
Procedure
Ask customer to separate job into smaller parts. Helpful information may be found in User Guide sections Overwrite Hard Disk or Mailbox.
If the problem persist reload Software (ADJ 9.3.1).
If the problem persists perform Hard Disk Diagnostic Program.
If the problem persists perform GP 6 Special Boot Modes HDD Initialization.
|
Revision |
January 2007 |
|
WorkCentre 7132 |
2-19 |
Status-indicator-raps
002-770
|
Status-indicator-raps |
January 2007 |
Revision |
|
002-770 |
||
|
2-20 |
WorkCentre 7132 |
003-318 IIT Software RAP
The IIT software is corrupt.
Procedure
Reload Software (ADJ 9.3.1).
If the problem persists, replace the ESS PWB (PL 11.2).
003-319 IIT Video Driver Detection RAP
One of the following errors is detected:
•Compression Threshold overflow
•DMA Transfer error
•Other system compression errors
Procedure
Reload Software (ADJ 9.3.1).
If the problem persists, replace the ESS PWB (PL 11.2).
|
Revision |
January 2007 |
Status-indicator-raps |
|
003-318, 003-319 |
||
|
WorkCentre 7132 |
2-21 |
003-320 IISS-ESS Communication 1 RAP
BSD-ON:3.1/6.2
An abnormal parameter is set as the argument for the send function.
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
003-321 IISS-ESS Communication 2 RAP
BSD-ON:3.1/6.2
The ACK (acknowledgement code) could not be received after 2 resend attempts. (The Sequencing No. of the sent Message Packet is incorrect.)
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
|
Status-indicator-raps |
January 2007 |
Revision |
|
003-320, 003-321 |
||
|
2-22 |
WorkCentre 7132 |
003-322 IISS-ESS Communication 3 RAP
BSD-ON:3.1/6.2
The ACK (acknowledgement code) could not be received after 2 resend attempts. (The Packet No. of the sent Message Packet is incorrect.)
003-323 IISS-ESS Communication 4 RAP
BSD-ON:3.1/6.2
The ACK (acknowledgement code) could not be received after 2 resend attempts. (The Message Length of the sent Message Packet is incorrect.)
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
|
Revision |
January 2007 |
Status-indicator-raps |
|
003-322, 003-323 |
||
|
WorkCentre 7132 |
2-23 |
003-324 IISS-ESS Communication 5 RAP
BSD-ON:3.1/6.2
The ACK (acknowledgement code) could not be received after 2 resend attempts. (The Message Length of the sent Message Packet is incorrect.)
003-325 IISS-ESS Communication 6 RAP
BSD-ON:3.1/6.2
The ACK (acknowledgement code) could not be received after 2 resend attempts. (A parity error was detected by hardware in the IIT/IPS PWB.)
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
|
Status-indicator-raps |
January 2007 |
Revision |
|
003-324, 003-325 |
||
|
2-24 |
WorkCentre 7132 |
003-326 IISS-ESS Communication 7 RAP
BSD-ON:3.1/6.2
The ACK (acknowledgement code) could not be received after 2 resend attempts. (Framing error was detected by hardware in the IIT/IPS PWB.)
003-327 IISS-ESS Communication 8 RAP
BSD-ON:3.1/6.2
The ACK (acknowledgement code) could not be received after 2 resend attempts. (An overrun error was detected by hardware in the IIT/IPS PWB.)
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
|
Revision |
January 2007 |
Status-indicator-raps |
|
003-326, 003-327 |
||
|
WorkCentre 7132 |
2-25 |
003-328 IISS-ESS Communication 9 RAP
BSD-ON:3.1/6.2
The ACK (acknowledgement code) could not be received after 2 resend attempts. (After header recognition, receive interruption was detected by the IIT/IPS PWB.)
003-329 IISS-ESS Communication 10 RAP
BSD-ON:3.1/6.2
The NAK that notifies of the occurrence of a transmission failure is received. (The Sequencing No. of the received Message Packet is incorrect.)
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
|
Status-indicator-raps |
January 2007 |
Revision |
|
003-328, 003-329 |
||
|
2-26 |
WorkCentre 7132 |
003-330 IISS-ESS Communication 11 RAP
BSD-ON:3.1/6.2
The NAK that notifies of the occurrence of a transmission failure is received. (The Packet No. of the received Message Packet is incorrect.)
003-331 IISS-ESS Communication 12 RAP
BSD-ON:3.1/6.2
The NAK that notifies of the occurrence of a transmission failure is received. (The Message Length of the received Message Packet is incorrect.)
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
|
Revision |
January 2007 |
Status-indicator-raps |
|
003-330, 003-331 |
||
|
WorkCentre 7132 |
2-27 |
003-332 IISS-ESS Communication 13 RAP
BSD-ON:3.1/6.2
The NAK that notifies of the occurrence of a transmission failure is received. (The Check Code of the received Message Packet is incorrect.)
003-333 IISS-ESS Communication 14 RAP
BSD-ON:3.1/6.2
The NAK that notifies of the occurrence of a transmission failure is received. (A parity error was detected by hardware of the UART.)
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
|
Status-indicator-raps |
January 2007 |
Revision |
|
003-332, 003-333 |
||
|
2-28 |
WorkCentre 7132 |
003-334 IISS-ESS Communication 15 RAP
BSD-ON:3.1/6.2
The NAK that notifies of the occurrence of a transmission failure is received. (A framing error was detected by hardware of the UART.)
003-335 IISS-ESS Communication 16 RAP
BSD-ON:3.1/6.2
The NAK that notifies of the occurrence of a transmission failure is received. (An overrun error was detected by hardware of the UART.)
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
|
Revision |
January 2007 |
Status-indicator-raps |
|
003-334, 003-335 |
||
|
WorkCentre 7132 |
2-29 |
003-336 IISS-ESS Communication 17 RAP
BSD-ON:3.1/6.2
The NAK that notifies of the occurrence of a transmission failure is received. (After the header was recognized, it was detected that receiving was aborted.)
003-337 IISS-ESS Communication 18 RAP
BSD-ON:3.1/6.2
After restoring from Power Saver mode, there was no response to the Power On command sent to the IIT/IPS PWB within the specified time.
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
|
Status-indicator-raps |
January 2007 |
Revision |
|
003-336, 003-337 |
||
|
2-30 |
WorkCentre 7132 |
003-338 IISS-ESS Communication 19 RAP |
003-339 IISS-ESS Communication 20 RAP |
|
BSD-ON:3.1/6.2 |
BSD-ON:3.1/6.2 |
|
The driver detected an incorrect send parameter. |
The establishment of parameter transmission failed. |
|
Procedure |
Procedure |
Reload Software (ADJ 9.3.1).
Pull out and insert or replace the IIT Cable.
Reload Software (ADJ 9.3.1).
Pull out and insert or replace the IIT Cable.
|
Revision |
January 2007 |
Status-indicator-raps |
|
003-338, 003-339 |
||
|
WorkCentre 7132 |
2-31 |