018-505 SMB-DOS Protocol Error RAP
018-505 SMB user authentication failed/unable to log into SMB scanner.
Procedure
1. Have the customer contact the network administrator to confirm the following: for the correct user name or password.
a. Server user name and password
b. Server host name or IP address
c. Share name
d. Server firewall settings
e. In the case of Windows Server 2003, ensure that the time of the SMB server is synchronized with that of the device.
NOTE: If the user forgets his/her password, he/she needs to set up a new password.
2. This is how to reset Password:
a. On the domain controller for the active directory that has user info, select (Start) menu > (All Programs) > (Management Tool) > (Active Directory Users and Computers).
b. From the left frame of the (Active Directory Users and Computers) window, select (Active Directory Users and Computers (Server) > (Domain) > (Users), and list user information.
c. Right-click the target user on the right frame of the (Active Directory Users and Computers) window and select (Reset Password)
d. Confirm users that are allowed to use Share Windows.
3. This is how to confirm users. (MacOS X v10.4)
a. From (Dock), start the (System Environment Settings) icon.
b. On the (System Environment Settings) window, click the (Share) icon.
c. From the Select Service window, select ‘Share Windows’ and click the (Account) button.
**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner’s property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782
Unable to authenticate due to an incorrect SMB user name or password.
In SMB Authentication:
–
The user could not be identified because of his/her wrong user name or password.
–
The time SMB Server tells differs from the time the machine tells. (This occurs under
Windows Server 2003)
In Scanner to SMB:
–
When trying to send a scanned image, the user could not log in to the SMB server
because of his/her wrong user name or password.
–
The time SMB Server tells differs from the time the machine tells. (This occurs under
Windows Server 2003)
[The following applies to DMP6-2 and later products only.]
–
The specified user name is not registered as a user that can use Share Windows.
(MacOS X v10.4)
Procedure
Take either of the following actions to resolve the problem.
–
Contact the network administrator for the correct user name or password.
–
In the case of Windows Server 2003, synchronize the time SMB Server tells with the
time this machine tells.
NOTE:
There is no way to confirm Password. If the user forgets his/her password, he/she needs to set
up a new password.
This is how to reset Password:
1.
On the domain controller for the active directory that has user info, select [Start]
menu>[All Programs]>[Management Tool]>[Active Directory Users and Computers].
2.
From the left frame of the [Active Directory Users and Computers] window, select
[Active Directory Users and Computers [Server]]>[Domain]>[Users], and list user
information.
3.
Right-click the target user on the right frame of the [Active Directory Users and
Computers] window and select [Reset Password].
[The following applies to DMP6-2 and later products only.]
–
Confirm users that are allowed to use Share Windows. (MacOS X v10.4)
This is how to confirm users.
1.
From [Dock], start the [System Environment Settings] icon.
2.
On the [System Environment Settings] window, click the [Share] icon.
3.
From the Select Service window, select «Share Windows» and click the [Account]
button.
Status Indicator RAPs
018-505, 018-506
018-506 CA Field ID Mismatch RAP
When the fault occurs in SMB authentication:
•
Unable to authenticate due to wrong user name or password
•
Time of SMB server and that of M/C are not the same. The fault occurs with Windows
Server 2003
•
When the fault occurs while scanner transfers scanned data to PC storage to SMB:
–
Unable to log in to SMB server while in scanned data transfer due to wrong user
name or password
–
Time of SMB server and that of M/C are not the same. The fault occurs with Win-
dows Server 2003.
NOTE: For only [SC12041: Product of DMP6-2 or later]:
Designated user name is not registered as user allowed to use shared Windows MacOS X
v10.4.
Procedure
Take any of the following actions:
-Check user name or password with network administrator.
-For Windows Server 2003, to make time of SMB server and that of this M/C identical.
-Password cannot be verified. When you forget password, password needs to be reset accord-
ing to the following procedure:
1) Select [Start] menu> [All programs] >[Management tool] >[Active Directory user and com-
puter] on domain controller of active directory where user information is set.
2) Select [Active Directory user and computer [Server]] >[Domain] >[Users] and list user infor-
mation from the left frame of [Active Directory user and computer] window.
3) Right-click target user from the right frame of [Active Directory user and computer] window
and select [Reset password].
Verify user who can use Windows Share MacOS X v10.4 according to the following procedure:
1) Activate [System setting] icon from [Dock].
2) Click [Share] icon in [System setting] window.
3) Select [Windows Share] on Service selection screen and click [Account] button.
4) Check account you want to make valid and click [Complete] button.
07/2011
2-300
BUS Updated 12/2011
Initial Issue
WorkCentre 5335 Family Service Documentation
Содержание
- Xerox Smb-Dos Protocol Error 1-005
- Fault Code 018-505: SMB-DOS Protocol Error 1-005 . — Xerox
- Fault Code 018-505: SMB DOS Protocol Error — Xerox
- Completed with Error (018-505): SMB-DOS protocol error 1-005
- Completed With Error (018-505): SMB-DOS Protocol Error 1-005
- How to Fix 018-505 Error Code for Xerox C7020 C7025 C7030 .
- Solved: Setting up C405 scan to pc — Customer . — Xerox
- Xerox Smb-Dos Protocol Error 1-005 Fixes & Solutions
- Smb dos protocol error 1 005
- Smb dos protocol error 1 005
- Smb dos protocol error 1 005
Xerox Smb-Dos Protocol Error 1-005
We have collected for you the most relevant information on Xerox Smb-Dos Protocol Error 1-005, as well as possible solutions to this problem. Take a look at the links provided and find the solution that works. Other people have encountered Xerox Smb-Dos Protocol Error 1-005 before you, so use the ready-made solutions.
Fault Code 018-505: SMB-DOS Protocol Error 1-005 . — Xerox
- https://www.support.xerox.com/en-us/article/en/2041452.html
- Xerox Business Innovation Partner Program Xerox DocuShare Partner Program Log in to your partner portal: Log in to your partner portal:
Fault Code 018-505: SMB DOS Protocol Error — Xerox
- https://www.support.xerox.com/en-us/article/en/2036170
- Feb 20, 2019 · Fault Code 018-505: SMB DOS Protocol Error Fault Code 018-505 appears when an Authenication Failure has occured when attempting to log into the SMB Server. Make Sure the SMB Settings such as Host Name or IP, Share Name and Document Path are Entered Correctly. Make Sure the Credentials Used to Login to the SMB Server are Entered Correctly.
Completed with Error (018-505): SMB-DOS protocol error 1-005
- https://www.experts-exchange.com/questions/23248852/Completed-with-Error-018-505-SMB-DOS-protocol-error-1-005.html
- Mar 22, 2016 · They have a new Xerox WorkCenter 7328 and we have it setup for network scanning. I installed and setup a Samba server using Ubuntu Server 7.10. This involved setting up a repository and shares and so on.Reviews: 6
Completed With Error (018-505): SMB-DOS Protocol Error 1-005
- http://www.firstarsoft.com/018-505-smb-dos-protocol-error-1-005
- The wireless 1-005 is around 150 and mostly new games. I am having the xerox smb scanning setup error versalink c405 can get at least of an ethernet connection. So update smb-dos Versalink C405 Scan To Network that a laptop usually devides my new one arrived today. Thanks in advance for combofix tool, make sure has a 170 F setting.
How to Fix 018-505 Error Code for Xerox C7020 C7025 C7030 .
- https://www.xwktech.com/blogs/articles/how-to-fix-018-505-error-code-for-xerox-versalink-c7020-c7025-c7030-c7000-printer
- Oct 18, 2019 · PL 90.30 Developer Unit Components for Xerox VersaLink C7020 C7025 C7030 C7000 Printer Feb 19, 2020. PL 90.25 Marking Guide Components for Xerox VersaLink C7020 C7025 C7030 C7000 Printer Feb 18, 2020. PL 90.20 Xerographic Components for Xerox VersaLink C7020 C7025 C7030 C7000 Printer Feb 17, 2020
Solved: Setting up C405 scan to pc — Customer . — Xerox
- https://forum.support.xerox.com/t5/Copying-Faxing-Scanning/Setting-up-C405-scan-to-pc/td-p/209189
- IP of PC = Click on your start menu, type CMD and hit the Enter key. Type ipconfig in the new window and hit Enter. Find the IPv4 address and put it in the first field. Now, we need the Share. Click on the Start menu and this time type 2 back slashes and the IP address found in the above and hit Enter (In my case it is Start > \192.1638.2.36 > Enter. In my case, I will find «Scans» …
Xerox Smb-Dos Protocol Error 1-005 Fixes & Solutions
We are confident that the above descriptions of Xerox Smb-Dos Protocol Error 1-005 and how to fix it will be useful to you. If you have another solution to Xerox Smb-Dos Protocol Error 1-005 or some notes on the existing ways to solve it, then please drop us an email.
Источник
Smb dos protocol error 1 005
struggling to set up scanning to my pc, can’t work out how to do it.
Have a VersaLink C405 that I got last week — printing is fine, faxing fine, but cannot scan.
From looking through here, in handbook (not that great imo), and google searches I have tried to make an address book entry for the PC I want to scan to, and a folder that I have shared — is this via the SMB field?
No idea what info needs to be input for it to work though, and can’t find any guides that explain this accurately
Any help is appreciated
Sorry — forgot to add: windows 10 home, version 1703, os build 15063.608, 64 bit
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
IP of PC = Click on your start menu, type CMD and hit the Enter key. Type ipconfig in the new window and hit Enter
Find the IPv4 address and put it in the first field
Now, we need the Share
Click on the Start menu and this time type 2 back slashes and the IP address found in the above and hit Enter
(In my case it is Start > \192.1638.2.36 > Enter
In my case, I will find «Scans» and «Users», and I want to send them to Scans
So now I type Scans in the box for the Share
Document path is not needed, leave it blank
Login name is finicky, format it like it is found here (in the brackets), just right-click your shared folder in Windows and go to Properties , get to the point in the screenshot and add your username you use to log on and make sure it has Full control , then type in the username as it exists within the brackets
Please be sure to select » Accept Solution » and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks very much, all working now
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I’ve got this working on a C405DNW to a share called Scans.
All I want to do now is scan to a sub-folder of the Scans share for each user. So I’ve put the sub-folder name into the «Document Path» box, but it throws an SMB DOS protocol error 1-005.
Document Path: User1
Document Path: User1
doesn’t. The folder \ScansUser1 exists with the correct permissions.
I spoke to Xerox tech support on the phone and they suggested setting up a seprate share for each user, but that sounds really messy and I’d rather use the document path field as that’s exactly what I think it’s for?
Any suggestions please?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Unshare the User1 folder and try again.
I’ve seen these things work absolutely fine if you simply create a folder in a share.
I have also seen them fail miserably if you manually share the folder that is in the share.
In most cases, when it fails, it can be made to work via just not using the share ( Scans in your case)
I spoke to Xerox tech support on the phone and they suggested setting up a seprate share for each user, but that sounds really messy and I’d rather use the document path field as that’s exactly what I think it’s for?
That path is just to go deeper in a share, which is what you are doing. But, if you actually are sharing them, there is no reason to actually have Scans at all, it is just another box to fill in that case.
Please be sure to select » Accept Solution » and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I cannot understand why something as simple as scanning to your PC, which we have been doing easily since the 1990’s, all of a sudden requires an IT degree to be able to setup on a 2017 model?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
How do you first get to the SMB Screen you are showing? It would be great if directions included the steps of where to first go to solve or troubleshoot a problem? I am so frustrated that this unit is so difficult to setup? The GUI and software for this unit is like a throw back to something from the 1980’s.
My SMB screen under the Connectivity Tab, looks like this below, so I can not even attempt to replicate your fix for this most simple, basic need, scanning to a computer.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
80% of the setup isn’t Xerox, it is Apple/Microsoft/Linux etc etc. And yet, I covered every single step for the user with pictures for every step for their scenario, and they got it working from those steps without question.
As for where you put the info on the Xerox portion, EWS > Address Book > Add Contact > Network (SMB)
If you have some special issue unlike what is posted in a thread, start a new one, name your specifics and kindly ask for help, adding to a solved thread with nothing but complaints does nothing for anyone but make it harder for the person who needs help and is using the search to find a resolution to their issue to find it by just adding garbage data to sort through.
If you think you are more capable than anyone else, go ahead and start helping people in threads that are not solved.
If you have a specific issue, be nice, start a thread, be polite and clearly describe what issue you have and maybe someone will help you.
If you are just looking to complain, feel free to do so, just don’t expect a great outpouring of kindness and help in the end.
Please be sure to select » Accept Solution » and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!
Источник
Smb dos protocol error 1 005
Use Internet Explorer or Edge instead of Chrome.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
This solution does not work for me !
when I reach the prompt command I have noted that the on screen IP4 address is different but despite repeated trying I cannot actually change it to the correct one using these instructions
more detail please !
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
A response would be greatly appreciated
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Excellent! Now working
Clear description. (I would never have got that working without that info)
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
hi i can’t seem to able to do the login name correclty can you direct me on who should i put as a username
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I’m attempting to set up a new SMB contact, but I keep receiving a Error (18-505) : SMB-DOS protocol error 1-005. From what I can tell this means that the password that I’m entering in the new SMB contact data field is wrong. I’m positive that the password that I’m entering is the password that’s associated with the email/account that I use to log into my Windows 11 account. I’ve even tried using no password and that doesn’t work.
I know that the IPv4 address is correct and I’ve enabled the sharing fucntions on the «Xerox Scans» folder that the scans are set to be delivered to. Does anyone know what I can do to troubleshoot this?
Источник
Smb dos protocol error 1 005
It seems to me you are trying to connect to the Xerox using a secure connection when the Xerox does not require a secure connetion to access the EWS. My suggestion is to remove https:// from the beginning of the URL so the only characters in the URL is the IP address itself. So instead of https://192.168.1.35 try just 192.168.1.35 and see if that gets you there. The IP referenced is a random IP address for an example. Be sure to use the IP address assigned to your printer. Hope that helps!
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Good suggestion, but didn’t work. However, I did get into the printer using the old ipv4 and adding a port #, in this case 339. I believe it’s supposed to be 445 per the instructions; why I remembered 339 from January is unknown. Must be one of those old person things. I then was able to load the firmware update. Huzzah! Now working to get the scanning function to work. Will report back in next 24 hours on that either way.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
STILL NOT WORKING: I was able to download the «software» to my PC and run the update. What came as the update was XeroxSmartStart_1.4.27.0—unsure the date on it but the system knows I have a WC6515 so I assume it contains the latest drivers. Once updated, I redid the address book using two usernames of either the IPv4 or Hostname to see which one worked. I used both Port 139 and 445 (as suggested by the on-line help guide) once each for both. Neither worked. The errors I received from the WC6515 (printed out) were:
-Completed with Error (018-755), Server connection error in SMB (for one combo of IPv4 and password)
-Completed with Error (018-505), SMB-DOS protocol error1-005 (for the other three combos of Hostname or IPv4 and password))
Therefore, I know I can update the WC6515, I know it will read scans, I just haven’t figured out yet how to get scans into my PC folder. And yes, I have the correct IPv4 for the PC and the correct hostname for the PC. And, yes, I identify the correct folder to receive the scans on my PC. When it asks for password, I supplied the password/pin I use to get into my PC.
Any other suggestions?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I just spent 62 minutes on the phone with Xerox support; yes, I paid $25 because I’m out of warranty. They can’t fix my problem because: I have a new W10 computer; WC6515 requires user names and W10 uses (or at least led me in setup to that) to use my live.com account as my user name. WC6515 cannot use email address, must be a user name; I don’t have a W10 user name for my laptop. Now they said I have to have my local IP give me a user name before I can scan from the WC6515 to my laptop. What the heck? I have to contact my local Comcast office and ask them to set up an IP user name on my computer.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I’m not sure why they would advise you to contact your ISP for a username. You can simply go into user management and create a user name yourself to use with the Xerox.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
It took me 4 hours over three days working with 5 Xerox reps to fix this.
People at Xerox support who helped the most were: Lionel and Cory; they stayed with me over 3 hours total while we tried scores of solutions.
Don’t believe those at Xerox who tell you to get an ISP user name and put it in the WC6515 address book.
Key things to know:
a) this likely applies to W10 only (PC is Dell Inspiron 3576-64x) but read on as some of this may help
b) username CANNOT be an email address (mine was)
c) password for user name CANNOT be a pin (mine was)
d) folder to receive scans CANNOT have spaces or special characters in the name (mine had a space)
e) username with folder to receive scans MUST be an adminstrator
f) folder to receive scans MUST be fully shared with read/write permissions accorded the target username
g) after the WC6515 address book updated with user, username and folder info, restart the PC (assuming one has already shared the folder), only then attempt to scan
h) if while taking sharing actions, the username does NOT come up as hyperlinked (blue), try it anyway—that’s when it worked
i) celebrate if it works (been trying since April [off and on] to solve this)
Источник
Unable to authenticate due to an incorrect SMB user name or password.
In SMB Authentication:
–
The user could not be identified because of his/her wrong user name or password.
–
The time SMB Server tells differs from the time the machine tells. (This occurs under
Windows Server 2003)
In Scanner to SMB:
–
When trying to send a scanned image, the user could not log in to the SMB server
because of his/her wrong user name or password.
–
The time SMB Server tells differs from the time the machine tells. (This occurs under
Windows Server 2003)
[The following applies to DMP6-2 and later products only.]
–
The specified user name is not registered as a user that can use Share Windows.
(MacOS X v10.4)
Procedure
Take either of the following actions to resolve the problem.
–
Contact the network administrator for the correct user name or password.
–
In the case of Windows Server 2003, synchronize the time SMB Server tells with the
time this machine tells.
NOTE:
There is no way to confirm Password. If the user forgets his/her password, he/she needs to set
up a new password.
This is how to reset Password:
1.
On the domain controller for the active directory that has user info, select [Start]
menu>[All Programs]>[Management Tool]>[Active Directory Users and Computers].
2.
From the left frame of the [Active Directory Users and Computers] window, select
[Active Directory Users and Computers [Server]]>[Domain]>[Users], and list user
information.
3.
Right-click the target user on the right frame of the [Active Directory Users and
Computers] window and select [Reset Password].
[The following applies to DMP6-2 and later products only.]
–
Confirm users that are allowed to use Share Windows. (MacOS X v10.4)
This is how to confirm users.
1.
From [Dock], start the [System Environment Settings] icon.
2.
On the [System Environment Settings] window, click the [Share] icon.
3.
From the Select Service window, select «Share Windows» and click the [Account]
button.
Status Indicator RAPs
018-505, 018-506
018-506 CA Field ID Mismatch RAP
When the fault occurs in SMB authentication:
•
Unable to authenticate due to wrong user name or password
•
Time of SMB server and that of M/C are not the same. The fault occurs with Windows
Server 2003
•
When the fault occurs while scanner transfers scanned data to PC storage to SMB:
–
Unable to log in to SMB server while in scanned data transfer due to wrong user
name or password
–
Time of SMB server and that of M/C are not the same. The fault occurs with Win-
dows Server 2003.
NOTE: For only [SC12041: Product of DMP6-2 or later]:
Designated user name is not registered as user allowed to use shared Windows MacOS X
v10.4.
Procedure
Take any of the following actions:
-Check user name or password with network administrator.
-For Windows Server 2003, to make time of SMB server and that of this M/C identical.
-Password cannot be verified. When you forget password, password needs to be reset accord-
ing to the following procedure:
1) Select [Start] menu> [All programs] >[Management tool] >[Active Directory user and com-
puter] on domain controller of active directory where user information is set.
2) Select [Active Directory user and computer [Server]] >[Domain] >[Users] and list user infor-
mation from the left frame of [Active Directory user and computer] window.
3) Right-click target user from the right frame of [Active Directory user and computer] window
and select [Reset password].
Verify user who can use Windows Share MacOS X v10.4 according to the following procedure:
1) Activate [System setting] icon from [Dock].
2) Click [Share] icon in [System setting] window.
3) Select [Windows Share] on Service selection screen and click [Account] button.
4) Check account you want to make valid and click [Complete] button.
07/2011
2-300
BUS Updated 12/2011
Initial Issue
WorkCentre 5335 Family Service Documentation
Thanks: 0
Likes: 0
Dislikes: 0
-
01-07-2014
#1
Service Manager
1,000+ Posts
- Rep Power
- 45
Xerox WC5225 with error 18-505
Customer called with error 18-505 on WC5225. The information i have so far seems to indicate some king of communication problem between machine and server/computer. Customer gets this when trying to scan to computer.
I asked customer whether they use passwords and he said no and that they have been scanning all alon g with no problem until a few days ago.
Please help as I am a little confused about this and need some direction. Frank/ActionPhotocopy
-
01-08-2014
#2
Re: Xerox WC5225 with error 18-505
18-505 SMB-DOS protocol error.
Unable to authenticate due to an incorrect user name or password. SMB
Check the user name and password with the system administrator. Note, the password cannot be verified. If you have forgotten the password, reset the password.
Note, Verify that the Date and Time on the WorkCentre EXACTLY match the date and time on the network server and destination PC. This is an especially common problem after daylight savings time change.
If none of the above resolve the issue, go to xerox.com to obtain the newest software level and install.
-
01-08-2014
#3
Service Manager
1,000+ Posts
- Rep Power
- 45
Re: Xerox WC5225 with error 18-505
Thanks Tom but as I mentioned they never used passwords for scanning and have never had a problem until a few days ago. Your last suggestion would be best option unless there was a time change by accident recently which caused a mismatch in the time. I am going there tomorrow and will try to obtain more info. Frank
-
01-09-2014
#4
Senior Tech
100+ Posts
- Rep Power
- 28
Re: Xerox WC5225 with error 18-505
Had the same symptoms on a 128. Turned out to be the modem for their broadband. The phone company changed it, somehow it had different settings. A few days later, no worky.
Glenn
-
01-09-2014
#5
Service Manager
1,000+ Posts
- Rep Power
- 45
Re: Xerox WC5225 with error 18-505
Thanks Glenn. That’s good to know and I’ll look into it and report results when call is complete. Frank
Xerox WC5225 with error 18-505Bookmarks
Bookmarks
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
- BB code is On
- Smilies are On
- [IMG] code is On
- [VIDEO] code is On
- HTML code is Off
Forum Rules
I am setting up and office for some clients. They have a new Xerox WorkCenter 7328 and we have it setup for network scanning. I installed and setup a Samba server using Ubuntu Server 7.10. This involved setting up a repository and shares and so on. I had issues at first but mostly involving permissions. Once I got that setup correctly it all worked great. But then we decided to get a new hard drive (the original was an old 40gig and we got a new 320gig HD). I thought I’d be able to image it over but then ran into the fact that the ext3 file system doesn’t allow you to resize the partition. So I decided to just redo it all on the new HD. But now it won’t successfully scan to the server. I keep getting «Completed with Error (018-505): SMB-DOS protocol error 1-005». I double and triple checked the user name and password and they are correct. I’ve messed with permissions but this seems to be different than the problem I was having the first time. I put the old HD back in and it works fine. So I either need to be able to figure out how to get the new setup working or how to image the old drive to the new one and be able to utilize the free space that the 320GB gives over the old 40GB. Please let me know if you have any idea. Thanks, Eric.
Server SoftwareLinux DistributionsSystem Utilities
I started with Experts Exchange in 2004 and it’s been a mainstay of my professional computing life since. It helped me launch a career as a programmer / Oracle data analyst
Not exactly the question you had in mind?
Sign up for an EE membership and get your own personalized solution. With an EE membership, you can ask unlimited troubleshooting, research, or opinion questions.
ask a question
Сообщения об ошибке на панели управления
Многофункциональный принтер Phaser® 6180MFP
10-41
Ошибки, связанные с сетью
Сообщение
Условие/Причина/Действие
Ошибка эл. почты
Неверный SMTP
сервер
Ошибка 016-503
Нажмите ОК
SMTP-сервер не найден.
Используйте CentreWare IS для подтверждения правильности
адреса сервера.
Ошибка эл. почты
Неверный РОР3-
сервер
Ошибка 016-504
Нажмите ОК
РОР3-сервер не найден.
Используйте CentreWare IS для подтверждения правильности
адреса сервера.
Ошибка при входе в
эл.почту
Ошибка при входе на
РОР3
Ошибка 016-505
Нажмите ОК
Ошибка при входе на РОР3 сервер.
Используйте CentreWare IS для подтверждения правильности
параметров имени пользователя и пароля.
Ошибка при входе в
эл.почту
Ошибка 016-506
Нажмите ОК
Ошибка при входе на SMTP сервер.
Используйте CentreWare IS для подтверждения правильности
параметров имени пользователя и пароля.
Ошибка при входе в
эл.почту
Ошибка при входе на
SMTP
Ошибка 016-507
Нажмите ОК
Ошибка при входе на SMTP сервер.
Используйте CentreWare IS для подтверждения правильности
параметров имени пользователя и пароля.
Лимит размера эл.
собщения
Ошибка 016-985
Нажмите ОК
Лимит максимального размера файла электронной почты был
превышен.
Уменьшите разрешение сканера или размеры сканирования.
Современные копировальные аппараты Xerox отличаются качество, надежностью и «быстрым» стартом. Также у них существует множество особенностей, которые отличают их от принтеров других производителей. Например, используется тефлоновый вал, а не термопленка.
Однако избегать различных поломок и ошибок пока не удается ни одному устройству. К самым частым неисправностям у принтеров Xerox относятся: залипание или повреждение датчика бумаги, повреждение роликов подачи, часто требуется перепрошивка программного обеспечения.
Если у вас возникнут вопросы насчет того, как исправить код ошибки копировального аппарата Xerox, то вы можете обратиться к специалистам нашего сервисного центра.
Основные коды ошибок копировальных аппаратов Xerox и способы их устранения:
- Коды ошибок Xerox 1012, 1012(RE)
- Коды ошибок Xerox 1020
- Коды ошибок Xerox 1025
- Коды ошибок Xerox 1035
- Коды ошибок Xerox 1038
- Коды ошибок Xerox 2830
- Коды ошибок Xerox 5011, 5012, 5014
- Коды ошибок Xerox 5016, 5017, 5316, 5317
- Коды ошибок Xerox 5018, 5028
- Коды ошибок Xerox 5312, 5313, 5314
- Коды ошибок Xerox 5318, 5320, 5322
- Коды ошибок Xerox 5328
- Коды ошибок Xerox 5330
- Коды ошибок Xerox 5340, 5343
- Коды ошибок Xerox 5345
- Коды ошибок Xerox 5350, 5352
- Коды ошибок Xerox 5355
- Коды ошибок Xerox 5622
- Коды ошибок Xerox XC520, 540, 560, 580
Xerox 1012, 1012(RE)
| Код ошибки | Описание |
|---|---|
| E1 | Jam between paper feed and fuser |
| E3 | Jam in fuser |
| E5 | Clam shell open |
| E6 | Paper feed section cover is open |
| J1 | Toner cartridge near empty |
| J3 | Drum cartridge not seated properly |
| J7 | Waste toner full (replace drum cartridge) |
| L6 | Key counter out |
| L8 | Exposure area overheat |
| U1 | No clock pulse (drive problem) |
| U2 | Scan problem |
| U3 | Lens/mirror problem (RE model only) |
| U4 | Heat problem |
| U8 | Exposure lamp control circuit problem |
| E1 | Jam between paper feed and fuser |
| E3 | Jam in fuser |
| E5 | Clam shell open |
| E6 | Paper feed section cover is open |
| J1 | Toner cartridge near empty |
| J3 | Drum cartridge not seated properly |
| J7 | Waste toner full (replace drum cartridge) |
| L6 | Key counter out |
| L8 | Exposure area overheat |
| U1 | No clock pulse (drive problem) |
| U2 | Scan problem |
| U3 | Lens/mirror problem (RE model only) |
| U4 | Heat problem |
| U8 | Exposure lamp control circuit problem |
Xerox 1020
| Код ошибки | Описание |
|---|---|
| LL | Probable bad heater lamp |
Xerox 1025
| Код ошибки | Описание |
|---|---|
| A1 | DF jam |
| C1 | PF jam cass. 1 |
| C2 | PF jam cass. 2 |
| C3 | PF jam cass. 3 |
| C9 | Bypass jam |
| E1-1 | Paper jam before exit switch |
| E1-2 | Paper jam |
| E1-5 | Paper jam |
| E1-6 | Paper jam |
| E3-3 | Paper jam at exit switch |
| E3-4 | Paper jam at exit switch |
| E5 | Front door open |
| F1 | Collator jam |
| F5 | Collator interlock |
| F8 | No power to collator |
| F9 | Collator bin home switch |
| J7 | 250 copies since toner waste was full |
| L5 | Original cass. not present after clearing interrupt |
| L6 | Key counter |
| L8 | Platen glass too hot |
| U1 | Main motor clock pulse |
| U2 | Scan problem |
| U3-1 | Lens problem |
| U4-1 | Open thermistor |
| U4-2 | Low temperature |
| U4-4 | Temperature |
| U4-5 | Main PWB |
| U6-1 | Main PWB |
| U6-2 | Main PWB |
| U6-3 | Main board battery |
| U6-4 | Initialization |
| U8 | Exposure lamp |
Xerox 1035
| Код ошибки | Описание |
|---|---|
| A9 | Scanner location |
| C1 | Paper feed — upper cassette |
| C2 | Paper feed — lower cassette |
| C9 | Bypass jam |
| E5 | Clam shell is open |
| L6 | Key counter |
| U1 | Off/On |
| U2 | Optics |
| U4 | Low fuser temperature |
Xerox 1038
| Код ошибки | Описание |
|---|---|
| A1 | DF jam |
| C1 | PF jam cass. 1 |
| C2 | PF jam cass. 2 |
| C3 | PF jam cass. 3 |
| C9 | Bypass jam |
| E1-1 | Paper jam before exit switch |
| E1-2 | Paper jam |
| E1-5 | Paper jam |
| E1-6 | Paper jam |
| E3-3 | Paper jam at exit switch |
| E3-4 | Paper jam at exit switch |
| E5 | Front door open |
| F1 | Collator jam |
| F5 | Collator interlock |
| F8 | No power to collator |
| F9 | Collator bin home switch |
| J7 | 250 copies since toner waste was full |
| L5 | Original cass. not present after clearing interrupt |
| L6 | Key counter |
| L8 | Platen glass too hot |
| U1 | Main motor clock pulse |
| U2 | Scan problem |
| U3-1 | Lens problem |
| U4-1 | Open thermistor |
| U4-2 | Low temperature |
| U4-4 | Temperature |
| U4-5 | Main PWB |
| U6-1 | Main PWB |
| U6-2 | Main PWB |
| U6-3 | Main board battery |
| U6-4 | Initialization |
| U8 | Exposure lamp |
Xerox 2830
| Код ошибки | Описание |
|---|---|
| A9 | Scanner location |
| C1 | Paper feed — upper cassette |
| C2 | Paper feed — lower cassette |
| C9 | Bypass jam |
| E5 | Clam shell is open |
| E5 | Clam shell open |
| L6 | Key counter |
| U1 | Off/On |
| U2 | Optics |
| U4 | Low fuser temperature |
Xerox 5011, 5012, 5014
| Код ошибки | Описание |
|---|---|
| C8 | Bypass jam/no paper |
| C9 | Bypass jam |
| E1 | Jam |
| E3 | Fuser jam |
| E5 | Clamshell open |
| E6 | PF section cover open |
| J1 | Toner cartridge amost empty |
| J3 | Copy cart (drum unit) missing/not seated right |
| J7 | Copy cartridge has run 18,000 copies |
| J8 | Copy cartridge. Improperly seated or possible only one of two fuses in the cartridge blew |
| L6 | Key counter |
| L8 | Exposure glass too hot |
| U1 | Drive problem |
| U2 | Scan problem |
| U3 | Lens or mirror drive problem |
| U4 | Fuser problem. Heat lamp, thermoswitch, SSR, thermistor |
| U6 | Battery on main board |
| U8 | Exposure lamp or exposure lamp circuit |
Xerox 5016, 5017, 5316, 5317
| Code | Description |
|---|---|
| A1-1 | Document feeder feed jam |
| A1-2 | Document feeder belt jam |
| A2-1 | Document feeder exit jam |
| A2-2 | Duplex jam |
| A3 | DAD interlock |
| A5 | Duplex and DAD right side interlock |
| A6 | Copier jams after |
| A9 | Document feed belt drive motor |
| C1-3 | Top cassette misfeed |
| C2-3 | Middle cassette misfeed |
| C3-3 | Bottom cassette misfeed |
| C9-3 | Bypass misfeed |
| E1-11 to E1-14 | Paper jam in machine. Did not reach exit switch soon enough |
| E1-6 | Paper path jam |
| E3-31 to E3-34 | Exit switch jam |
| E3-6 | Fuser jam |
| E5 | Front door interlock |
| E6 | Right side interlock or TTM interlock |
| F1 | Sorter jam |
| F5 | Sorter interlock |
| F8 | Sorter board to copier main board communication problem |
| F9 | Sorter bins |
Xerox 5018, 5028
| Code | Description |
|---|---|
| A1 | Document is ADF |
| A1-8 | Main board received reset signal |
| A2 | ADF jams |
| A6, A7 | ADF jams |
| A9 | ADF jams |
| C1 — C4 | Feed jam |
| C5-1 to C5-4 | Jams in various areas |
| C5-2 | Jams in various areas |
| C5-3 | Jams in various areas |
| C5-4 | Duplex jam |
| E0 | Machine has reset |
| E1 | Jam |
| E1-E0 | Registration jam |
| E1-E5 | Clamshell interlock |
| E1-E6 | Right side interlock |
| E1-E7 | Two tray interlock |
| E1-E8 | Sorter interlock |
| E1-E9 | Copy cartridge interlock |
| E2 | Reset signal happened |
| E3 | Jam |
| E4 | Exit jam |
| E4-10 | Exit jam |
| E4-5 | Clamshell interlock |
| E4-6 | Right side interlock |
| E4-7 | Two tray interlock. Duplex interlock |
| E4-8 | Sorter interlock |
| E4-9 | Copy cartridge interlock |
| E5 | Clamshell interlock |
| E6 | Right side interlock |
| E7 | Duplex interlock |
| E9 | Copy cartridge interlock |
| F3-1 | Sorter bin home switch |
| F3-2 | Sorter cam switch |
| F3-3 | Sorter cam switch |
| J1-1 | Add toner |
| J1-2 | Temporary low toner signal |
| J2-0 | Replace copy cartridge |
| L2 | 2000 copies left on copy cartridge |
| L3 | ADF to machine communication problem |
| L4 (flashing) | 1000 copies left on fuser web |
| rr | Bad EPROM on main board |
| U0 | Main board |
| U2 | Scan problem |
| U2-1 | Scan home |
| U3-00 | Cam drive problem |
| U3-01 | Cam movement slow |
| U3-04 | Main board to duplex communication |
| U3-09 | Cam problem |
| U3-12 | Jogger problem |
| U3-19 | Cam problem |
| U3-21 | Cam problem |
| U3-23 | Cam problem |
| U3-29 | Cam problem |
| U3-32 | Cam problem |
| U3-34 | Cam problem |
| U3-39 | Cam problem |
| U3-43 | Cam problem |
| U3-45 | Cam problem |
| U3-49 | Cam problem |
| U3-54 | Cam problem |
| U3-56 | Cam problem |
| U3-59 | Cam problem |
| U4-1 | Fuser problem. Long warm up |
| U4-2 | Low fuser temperature after warm up |
| U4-3 | High fuser temperature |
| U4-4 | Open fuser thermistor |
| U4-6 | Replace fuser web |
| U4-7 | Thermistor signal problem |
| U7-1 | Copy cartridge belt drive problem |
| U9-3 | Exposure lamp problem |
| U9-4 | Toner motor |
| U9-5 | Problem in warm up |
Xerox 5312, 5313, 5314
| Код ошибки | Описание |
|---|---|
| C1 | Upper paper feed problem. Did not reach feed sensor |
| C2 | Lower paper feed problem. Did not reach feed sensor |
| E1 | Exit jam. Paper did not reach exit sensor |
| E3 | Exit jam. Paper still on exit sensor |
| J1 | Add toner |
| J3 | Copy cartridge (drum unit) not installed |
| J7 | Copy cartridge (drum unit) must be replaced |
| J8 | Copy cartridge (drum unit) problem |
| L6 | Problem with an accessory. Installed but not initialized |
| U1 | Drive problem. Main motor, gear etc. |
| U2 | Scan problem |
| U3 | Main board dip switches wrong. Lens drive problem |
| U4 | Fuser problem. Heat lamp, thermal switch, overheat, thermistor. |
| U6 | EPROM error |
| U8 | Auto exposure sensor. No exposure lamp or weak lamp |
Xerox 5318, 5320, 5322
| Code | Description |
|---|---|
| A1-11 | Original ready switch |
| A1-12 | Feed sensor |
| A1-1 to A1-32 | All indicate a paper path problem, etc. in the ADF |
| A1-21 | Original ready switch and document registration sensor or both the document feed sensor and document registration sensor |
| A1-22 | ADF registration sensor |
| A1-23 | Original did not reach ADF registration sensor quickly enough |
| A1-24 | ADF sensor stuck down too long |
| A1-25 | ADF sensor actuated at the wrong time during single sheet feed |
| A1-26 | ADF sensor not actuated quickly enough in sheet feed mode |
| A1-31 | In reverse, ADF sensor is not actuated soon enough |
| A1-32 | In reverse, ADF sensor is actuated too long |
| A2 | ADF exit problems |
| A2-1 | Original ready sensor and ADF exit switch are actuated or ADF feed in sensor and ADF exit switch are both actuated |
| A2-2 | ADF exit switch |
| A2-3 | ADF exit switch is not actuated on time |
| A3 | Irregular size documents |
| A3-1 | Wrong size original sensed in 1:1 mode |
| A3-2 | Wrong size original sensed in the 2:1 mode |
| A5 | ADF interlock |
| A5 | ADF interlock |
| A6 | ADF single sheet document reset. |
| A6-1 | Reset original |
| A6-2 | Reset sheet feeder |
| A7 | Document cover interlock |
| A8 | ADF exit interlock |
| C1 | Tray 1 jam |
| C1-2 | Paper feed problem in tray 1 |
| C1-3 | Paper does not reach registration |
| C2 | Tray 2 jam |
| C3 | Tray 3 jam |
| C3-1 | Paper feed problem from tray 3 |
| C3-2 | Paper feed problem from tray 3 |
| C3-3 | Paper feed problem from tray 1 |
| C6-1 | Duplex paper feed problem |
| C6-2 | Duplex and/or tray 1 paper feed problem |
| C6-3 | Paper feed problem from tray 1 |
| C7-1 | Paper feed problem from HCF |
| C7-2 | Paper feed problem from HCF on tray 1 |
| C7-3 | Paper feed problem from tray 1 |
| C8 | Paper stays in tray or duplex or HCF |
| C8-1 | Paper on tray 1 feed sensor |
| C8-2 | Paper on tray 2 feed sensor |
| C8-3 | Paper on tray 3 feed sensor |
| C8-4 | Paper on HCF feed sensor |
| C8-5 | Paper in duplex section |
| C9 | Bypass feed problem |
| C9-3 | Paper from bypass did not reach registration sensor quickly enough |
| E1-10 to E1-25 | Internal jam |
| E1-6 | Paper on registration sensor |
| E2 | Reset signal happened. Might read E-2 something else. |
| E3-30 to E4-14 | Exit jam |
| E3-30 to E3-35 | Exit switch actuated too long |
| E3-6 | Exit jam |
| E3-6 | Paper on exit switch |
| E4-10 to E4-14 | Inverter sensor not actuated. |
| E4-10 to E4-45 | Paper did not reach inverter switch soon enough |
| E4-15 | Inverter sensor |
| E4-40 to E4-45 | Duplex entry sensor |
| E4-6 | Paper on inverter switch |
| E4-6 | Inverter sensor |
| E5 | Front door interlock |
| E6-1 | Tray 1 interlock |
| E6-2 | 2 tray or duplex interlock |
| E6-3 | HCF interlock |
| E7-2 | Duplex inverter interlock |
| E7-3 | Duplex interlock |
| E8-10 to E8-15 | Paper on duplex feed sensor is not actuated soon enough |
| E8-6 | Paper in duplex |
| E8-6 to E8-15 | Duplex entry sensor |
| F1-1 | Paper did not reach sorter |
| F1-2 | Paper stayed on sorter feed sensor |
| F1-6 | Sorter exit sensor |
| F3 | Paper size not available for sort/stack |
| F5 | Sorter interlock |
| H2-1 | Communication problem between main board and duplex board |
| H2-2 | Side guard sensor problem |
| H3-1 | Communication problem between main board and HCF |
| H3-2 | Upper limit sensor problem on HCF |
| H6-1 | ADF size sensor |
| H6-2 | ADF nudgeer sensor |
| H6-3 | Belt drive motor does not have 24 volts. Black toner is empty, but 100 copies have been run without changing toner |
| J1 | Black toner is empty, but 100 copies have been run without changing toner |
| J3 | Replace copy cartridge |
| J3 | No copy cartridge (drum unit) |
| J7 | Copy cartrige must be replaced |
| J8-1 | Wrong copy cartridge installed |
| J8-2 | Copy cartridge EEPROM must be changed |
| L6 | Auditron or other counter problem |
| L6 | Key counter not installed |
| L8 | Platen glass temperature is too high |
| L9 | Communication problem between interimage erase/edge lamps and main board |
| U1-1 | Main motor drive problem |
| U2-1 | Scan home problem |
| U2-1 to U2-4 | Scan home sensor |
| U2-2 | Scan home problem or optics problem |
| U2-3, U2-4 | Scan home problem |
| U3-1 | Lens sensor problem |
| U4-1 | Fuser thermistor open |
| U4-2 | Fuser did not warm up properly |
| U4-3 | Fuser temperature too high |
| U4-4 | Fuser problem. Staying on too long |
| U4-6 | High fuser temperature |
| U5-1 | Sorter bin home switch not activated |
| U5-2 | Sorter bin home switch stayed actuated |
| U5-3 | Sorter bin home switch |
| U5-4 | Sorter bin home switch |
| U6-1 | ROM problem |
| U6-2 | RAM problem |
| U6-3 | Low battery |
| U6-4 | Incorrect value in NVM. Reinitialize main board with code 20-96 |
| U8-1 | Exposure lamp problem |
| U8-2 | Communication problem main board and exposure board |
| U8-3 | Exposure lamp or exposure lamp board problem |
| U8-4 to U8-6 | Problem with exposure lamp, lamp sensor, lamp board |
Xerox 5328
| Code | Description |
|---|---|
| A1 | Document in ADF |
| A1-8 | Main board received reset signal |
| A2 | ADF jams |
| A6 | ADF registration jam |
| A7 | ADF interlock |
| A9 | Tray 1 jam |
| C1 | Tray 2 jam |
| C2 | Tray 3 jam |
| C3 | Bypass feed jams |
| C4 | Machine has reset |
| E1 | Jam |
| E1-5 | Clamshell interlock |
| E1-6 | Right side interlock |
| E1-7 | Two tray interlock, or duplex interlock |
| E1-8 | Sorter interlock |
| E1-9 | Copy cartridge interlock |
| E1 or E1-0 | Registration jam |
| E2 | Reset signal happened |
| E3 | Jam in transfer area |
| E4 | Exit jam |
| E4-0 | Exit jam |
| E4-5 | Clamshell interlock |
| E4-6 | Right side interlock |
| E4-7 | Two tray interlock |
| E4-8 | Sorter interlock |
| E4-9 | Copy cartridge interlock |
| E5 | Clamshell interlock |
| E6 | Right side interlock |
| E9 | Copy cartridge interlock |
| F3-1 | Sorter bin home switch |
| F3-2 | Sorter cam switch |
| F3-3 | Sorter cam switch |
| F5 | Sorter interlock |
| J1-1 | Add toner |
| J1-2 | Temporary low toner signal |
| J2-1, J2-2 | Replace copy cartridge |
| J5, J6 | ADF to machine communications problem |
| L2 | 2000 copies left on cartridge |
| L3 | ADF to machine communications problem |
| L4 | (flashing) 1000 copier left on fuser web |
| L6 | Auditron or other counter problem |
| LL | Main board. Try simulation 1.1 to initialize |
| rc | Wrong operation panel installed |
| rr | Bad EPROM on main board. Try 1.1 |
| U0 | Main board |
| U2 | Scan problem |
| U2-1 | Scan home |
| U2-2 | Scan home or scan encoder |
| U2-4 | Scan home or scan dual page sensor |
| U2-7 | Scan home |
| U4-1 | Fuser problem. Long warm up |
| U4-2 | Low fuser temperature after warm up |
| U4-3 | High fuser temperature |
| U4-4 | Open fuser thermistor |
| U4-6 | Replace fuser web. |
| U4-7 | Thermistor signal problem |
| U7-1 | Copy cartridge belt drive problem |
| U9-3 | Exposure lamp problem |
| U9-4 | Toner motor |
| U9-5 | Problem in warm-up |
Xerox 5330
| Code | Description |
|---|---|
| A1-1 to A1-32 | All indicate a paper path problem, etc. in the ADF. |
| A2 | ADF exit problems |
| A3 | Irregular size documents |
| A5 | ADF interlock |
| A6 | ADF single sheet document reset. |
| A7 | Platen interlock |
| A8 | ADF exit interlock |
| C1 | Tray 1 jam |
| C2 | Tray 2 jam |
| C3 | Tray 3 jam |
| C6-1, C6-2 | Jams related to duplex |
| C6-3 | Registration sensor, re tray 1 |
| C7-1, C7-2 | HCF feed problems |
| C7-3 | Tray 1 feed problem |
| C8 | Paper stays in tray or duplex or HCF |
| C9 | Bypass feed problem |
| E1-10 to E1-25 | Internal jam |
| E1-6 | Paper on registration sensor |
| E2 | Reset signal happened. Might read E-2 something else. |
| E3-30 to E4-14 | Exit jam |
| E3-6 | Exit jam |
| E4-10 to E4-14 | Inverter sensor not actuated. |
| E4-15 | Inverter sensor |
| E4-40 to E4-45 | Duplex entry sensor |
| E4-6 | Inverter sensor |
| E5 | Front door interlock |
| E6-1 | Tray 1 interlock |
| E6-2 | 2 tray or duplex interlock |
| E6-3 | HCF interlock |
| E7-2, E7-3 | Duplex interlock |
| E8-6 to E8-15 | Duplex entry sensor |
| F1-1 | Sorter entry sensor |
| F1-6 | Sorter exit sensor |
| F3 | Paper size not available for sort/stack |
| F5 | Sorter interlock |
| J1 | Add toner |
| J3 | Replace copy cartridge |
| J7 | Replace copy cartridge |
| J8-1 | Wrong copy cartridge installed |
| J8-2 | Copy cartridge EEPROM |
| L6 | Auditron or other counter problem |
| L8 | Platen glass temperature is too high |
| L9 | Communication problem between interimage erase/edge lamps and main board |
| U1-1 | Main motor drive problem |
| U2-1 to U2-4 | Scan home sensor |
| U3-1 | Lens sensor |
| U4-1 | Open fuser thermistor |
| U4-2 | Fuser did not warm up properly |
| U4-3 | Fuser temperature too high |
| U4-4 | Fuser problem. Staying on too long |
| U4-6 | High fuser temperature |
| U5-1 | Sorter bin home switch not activated |
| U5-2 | Sorter bin home switch stayed actuated |
| U5-3 | Sorter bin home switch |
| U5-4 | Sorter bin home switch |
| U6-1 | ROM problem |
| U6-2 | RAM problem |
| U6-3 | Low battery |
| U6-4 | Incorrect value in NVM. Reinitialize main board with code 20-96 |
| U8-1 to U8-6 | Problem with exposure lamp, lamp sensor, lamp board |
Xerox 5340, 5343
| Code | Description |
|---|---|
| 00-009; 030 to 033 | A door was opened while paper was being fed |
| 00-047 | Paper in duplex |
| 00-1 | Auditron |
| 00-2 | Diagnostic error |
| 00-3 | Faults error |
| 00-4 | Ric error |
| 00-5 | Job manager system error |
| 00-6 | LLM interface |
| 00-7 | Standby error |
| 00-8 | Communications error |
| 00-9 | Xerographic error |
| 01-300 | Front interlock |
| 01-310 | Right upper interlock |
| 01-315 | Left upper interlock |
| 01-320 | Left lower interlock |
| 01-325 | Fuser interlock |
| 02-910 | Key counter missing |
| 02-920 | Wrong combination of accessories |
| 03-321, 322, 326, 327 | LLM to ISIL communications problems |
| 03-328 | IOT communications problem with duplex or tray 4 |
| 03-330 | IOT communications problems with HCF |
| 03-335, 03-336 | LLM communications problems with edit |
| 03-340 | NVM memory |
| 03-341, 03-347 | Communications problems between IOT and sorter |
| 03-350, 03-354 | Communications problem with LLM and user interface |
| 03-363, 03-364 | Communications problem between LLM & optics |
| 03-370, 03-373 | Communications problem between LLM & DADF |
| 03-380, 384 | |
| 03-416, 03-422 | RAM memory problem |
| 03-424, 426 | NVM memory problem |
| 03-430, 432 | Billing problem |
| 03-439 | GRAIB communications problem |
| 03-440 | RIC communications problem |
| 03-441 | RIC NVM problem |
| 03-442 | Modem |
| 03-443, 03-458 | RIC problems |
| 03-460 | Serial communications processor problem |
| 04-300 | Main motor or drive problem |
| 05-100, 05-108 | DADF registration sensor |
| 05-110 | DADF exit sensor |
| 05-115, 120 | DADF jams |
| 05-305 | DADF document drive |
| 05-310, 312 | DADF document sensor |
| 05-316 | DADF registration sensor jam |
| 05-325 | DADF exit sensor |
| 05-335, 341, 345 | DADF interlock switches |
| 06-300, 06-310 | Scan problems |
| 06-315 | Scan drive |
| 06-320A, 320B, 320C, 325 | Scan problem |
| 06-330 | Lens drive |
| 06-340 | Exposure control problem |
| 06-342 | LLM CPU problem |
| 06-344, 06-350 | Exposure cvontrol problem |
| 06-352 | IOT CPU problem |
| 07-300, 315, 330, 345 | Tray faults |
| 07-360, 07-370 | HCF problems |
| 07-375, 380A, 380B | Duplex problems |
| 08-100, 08-110 | Feed problems. Lead edge of copy paper is late getting to feed sensor of tray 1 |
| 08-115, 08-162 | Feed problem. Lead edge of copy paper is late getting to registration sensor |
| 08-165 | Paper jam at registration sensor |
| 08-310, 08-370 | Paper at a sensor when power is turned on |
| 08-330 | DADF nudger sensor |
| 08-380 | Registration side to side problem with home position |
| 08-390 | Nip |
| 09-300 | Copy cartridge finished (drum unit) |
| 09-310 | Add black toner Add color toner |
| 09-320 | Add color toner |
| 09-330 | Wrong copy cartridge (wrong drum unit) |
| 09-340 | Drum cartridge not installed properly |
| 09-350 | Waste toner full |
| 100 | A fault has occurred |
| 10-100 | Exit jam |
| 10-105 | Exit jam |
| 10-110 | Vertical sensor jam |
| 10-120, 122, 125 | Duplex jam |
| 10-150, 155 | Too much or not enough paper in duplex tray |
| 10-300 | Fuser thermistor |
| 10-302 | Low fuser temperature |
| 10-304 | Bad fuser temp |
| 10-308 | High fuser temperature or open thermistor |
| 10-310 | High fuser temperature |
| 10-312 | Fuser not up to temperature after energy save |
| 10-314 | Fuser problem |
| 10-320 | Fuser web finished |
| 10-330, 335, 340 | Exit switch, vertical sensor switch actuated when power is turned on |
| 11-100, 11-116 | Sorter jam |
| 11-150, 11-176 | Sorter auto stapler jam |
| 11-310, 314, 316 | Sorter interlock |
| 11-325A, B, C, D, E, F, G | Sorter index |
| 11-352, 354, 356 | Sorter auto stapler interlocks |
| 11-365A, B, C, D, E | Sorter auto stapler bin |
| 11-370, 371, 372A, 373A, 373B, 374 | Sorter auto stapler staple failure, staple home problem or tamper home problem |
| 11-385A, 385B, 390A,B,C,D,E, 396A | Sorter auto stapler staple failure, staple home problem or tamper home problem |
| 301 | Fuser web must be replaced |
| 302 | Copy cartridge (drum unit) must be replaced |
| 501 | Tray 1 must be rebuilt |
| 502 | Tray 2 must be rebuilt |
| 503 | Tray 3 must be rebuilt |
| 504 | Tray 4 must be rebuilt |
| 505 | HCF must be rebuilt |
| 506 | Bypass must be rebuilt |
| 507 | Duplex unit must be rebuilt |
| 508 | Replace black developer |
| 509 | Replace red developer |
| 510 | Replace green developer |
| 512 | Replace brown developer |
| 513 | Copy cartridge (drum unit) will need replacing soon |
| 514 | Fuser web will need replacing soon |
| 515 | DADF belt should be replaced |
| 516 | DADF feed rollers should be replaced |
| 517 | Replace exposure lamp |
| 518 | Replace suction filter |
| 519 | Replace ozone filter |
| 520 | Replace optics filter |
| 521 | Replace particle filter |
| 522 | Replace upper fuser roller |
| 523 | Replace fuser pawls |
| 524 | Replace pressure roller |
| 525 | Replace pressure roller pawls |
| 900-905 | Key operator calls |
Xerox 5345
| Код ошибки | Описание |
|---|---|
| 01-01 | Frequency monitoring and zero cross problem |
| 01-02 | Interlock |
| 01-03 | AC power problem |
| 01-04 | Finisher interlock |
| 01-05 | 24v problem |
| 03-01 | Optics to main board communication problem |
| 03-02 | Software reset problem |
| 03-03 | Could be punched holes in the lead edge of the original |
| 03-04 | Software problem |
| 03-06 | Low battery |
| 03-07 | NVM not initialized or is missing or defective |
| 03-17 | Communication problem between main board and finisher board |
| 03-18 | Initializes one NVM counter to agree to others |
| 03-19 | All three NVM counter to agree with others |
| 03-20 | Main board/interface board problems |
| 03-21 | Problem with RIC NVM |
| 03-22 | RIC modem problem |
| 03-23 | RIC real time clock failure. |
| 03-25 | RIC NVM problem or not initialized |
| 03-27 | NVM problem |
| 03-28 | Watchdog software problem |
| 03-29 | Microprocessor crystal not at correct frequency |
| 03-30 | No software response from finisher after 20 seconds have elapsed |
| 06-01 | Lens did not reach 1.1 position |
| 06-02 | 1/2 rate scanner problem |
| 06-03 | Scan home problem |
| 06-04 | Scan home problem |
| 06-05 | Scan home problem |
| 06-06 | Scan encoder |
| 06-07 | Scan encoder |
| 06-08 | Scan drive boost |
| 06-09 | Scan encoder |
| 06-11 | Scan encoder pulse phases |
| 06-12 | Insufficient scan damping |
| 07-01 | Duplex tray not home during duplexing |
| 07-02 | Tray 2 not home when selected |
| 07-13 | Tray 2 height sensor problem |
| 07-15 | Tray 2 empty |
| 07-16 | Tray 1 door open |
| 07-18 | Tray 1 stack sensor |
| 07-22 | Tray 1 empty |
| 07-26 | Tray 1 bypass switch actuated too long |
| 07-27 | Tray 1 bypass switch deactuated too early |
| 07-30 | Paper in duplex |
| 07-31 | Paper in duplex |
| 07-32 | Duplex tray empty, when paper should be there |
| 08-10 | Paper did not reach tray 2 input tray sensor |
| 08-11 | Paper did not reach duplex input sensor |
| 08-12 | Paper did not reach tray 1 |
| 08-14 | Paper did not leave tray 2 input sensor quickly enough |
| 08-18 | Trail edge did not reach tray 2 input sensor quickly enough |
| 08-19 | Trail edge did not reach tray 1 input sensor quickly enough |
| 08-20 | Paper in duplex |
| 08-21 | Paper in tray 2 input |
| 08-22 | Paper in tray 2 or duplex at wrong time |
| 08-23 | Paper at tray 1 input at wrong time |
| 08-24 | Paper in tray 1 at wrong time |
| 08-28 | Upper and lower nips problem |
| 09-08 | Low toner condition |
| 09-12 | Drum signals are out of range |
| 09-13 | Unstable drum patch readings |
| 09-15 | Patch is too dark |
| 09-16 | Patch is too light |
| 09-17 | Open toner container access cover |
| 09-18 | Low toner level |
| 09-21 | Low toner sensor disconnected |
| 09-22 | Low toner condition, even after machine has been theoretically, adding toner |
| 10-02 | Low fuser temperature |
| 10-03 | High fuser temperature |
| 10-06 | Paper did not reach out put switch |
| 10-07 | Paper stayed on output switch |
| 10-10 | Paper did not reach decurler sensor |
| 10-11 | Paper did not reach decurler sensor |
| 10-12 | Paper on decurler sensor |
| 10-13 | Paper did not reach duplex entry sensor in time |
| 10-14 | Paper did not reach duplex entry sensor in time |
| 10-15 | Paper on entry sensor at wrong time |
| 10-17 | Fuser temperature is too high and fuser relay has deactuated |
| 12-01 | Paper at finisher input sensor |
| 12-02 | Paper did not reach finisher |
| 12-03 | Paper reached finisher too soon |
| 12-05 | Paper at stapler |
| 12-06 | Paper at stapler |
| 12-07 | Paper did not reach stapler |
| 12-08 | Paper did not reach stapler |
| 12-10 | Complied motor not working properly |
| 12-15 | Eject motor problem and/or eject encoder |
| 12-20 | Stacker motor problem |
| 12-21 | Stacker interlock |
| 12-22 | Stacker bottom sensor |
| 12-23 | Stacker bottom sensor |
| 12-24 | Stacker bottom sensor senses full |
| 12-25 | Stack height sensor |
| 12-26 | Stack height sensor |
| 12-27 | Stack height sensor |
| 12-30 | Offset home sensor |
| 12-31 | Offset home sensor |
| 12-32 | OCT switch |
| 12-35 | Eject nip carriage |
| 12-36 | Eject cam interlock |
| 12-37 | Eject nip carriage open timing |
| 12-38 | Eject cam interlock |
| 12-40 | Tamper motor |
| 12-41 | Tamper home problem |
| 12-42 | Tamper home sensor |
| 12-43 | Staple load sensor |
| 12-44 | Tamper home sensor |
| 12-45 | Tamper home sensor |
| 12-50 | Low on staples |
| 12-51 | Stapler home sensor |
| 12-52 | Stapler home sensor |
| 12-53 | Eject cam interlock |
| 33-37 | Too few documents |
| 55-01 | RDH interlock switch open during use |
| 55-04 | Paper on bypass sensor |
| 55-05 | Paper at vacuum timing sensor |
| 55-06 | Paper on output sensor |
| 55-10 | No paper reached S31 |
| 55-20 | Paper did not leave S31 at correct time |
| 55-24 | Set counter arm problem |
| 55-25 | Documents in input tray not detected |
| 55-27 | Lead edge did not reach S35 at correct time |
| 55-2955-30 | Trail edge did not reach S35 at correct time |
| 55-31 | S32, ADF registration sensor did not see paper at correct time |
| 55-32 | S32 did not see trail edge at correct time |
| 55-33 | S36 One too many documents |
| 55-36 | One too many documents |
| 55-39 | Hole count problem on document feeder belt |
| 55-40 | Document belt travel problem |
| 55-41 | Document belt mistracking or skewing |
| 55-45 | Paper at inverter sensor |
| 55-47 | Inverter sensor did not see paper lead edge at correct time |
| 55-49 | More than 50 sheets in input tray |
| 55-50 | Right side interlock |
| 55-51 | Left side interlock |
| 55-55 | Document on glass |
| 93-93 | NVM has to be initialized after new software installed |
Xerox 5350, 5352
| Code | Description |
|---|---|
| 00-009, 030, 031, 032, 033 | A door was opened while paper was being fed |
| 00-047 | Paper in duplex |
| 00-1 | Auditron |
| 00-2 | Diagnostic error |
| 00-3 | Faults error |
| 00-4 | Ric error |
| 00-5 | Job manager system error |
| 00-6 | LLM interface |
| 00-7 | Standby error |
| 00-8 | Communications error |
| 00-9 | Xerographic error |
| 01-300 | Front interlock |
| 01-310 | Right upper interlock |
| 01-315 | Left upper interlock |
| 01-320 | Left lower interlock |
| 01-325 | Fuser interlock |
| 02-910 | Key counter missing |
| 02-920 | Wrong combination of accessories |
| 03-321, 322, 326, 327 | LLM to ISIL communications problems |
| 03-328 | IOT communications problem with duplex or tray 4 |
| 03-330 | IOT communications problems with HCF |
| 03-335, 336 | LLM communications problems with edit |
| 03-340 | NVM memory |
| 03-341-347 | Communications problems between IOT and sorter |
| 03-350-354 | Communications problem with LLM and user interface |
| 03-363, 364 | Communications problem between LLM & optics |
| 03-370-03-373 | Communications problem between LLM & DADF |
| 03-380, 384 | |
| 03-416-422 | RAM memory problem |
| 03-424, 426 | NVM memory problem |
| 03-430, 432 | Billing problem |
| 03-439 | GRAIB communications problem |
| 03-440 | RIC communications problem |
| 03-441 | RIC NVM problem |
| 03-442 | Modem |
| 03-443-458 | RIC problems |
| 03-460 | Serial communications processor problem |
| 04-300 | Main motor or drive problem |
| 05-100-108 | DADF registration sensor |
| 05-110 | DADF exit sensor |
| 05-115, 120 | DADF jams |
| 05-305 | DADF document drive |
| 05-310, 312 | DADF document sensor |
| 05-316 | DADF registration sensor jam |
| 05-325 | DADF exit sensor |
| 05-335, 341, 345 | DADF interlock switches |
| 06-300-310 | Scan problems |
| 06-315 | Scan drive |
| 06-320A, 320B, 320C, 325 | Scan problem |
| 06-330 | Lens drive |
| 06-340 | Exposure control problem |
| 06-342 | LLM CPU problem |
| 06-344-350 | Exposure cvontrol problem |
| 06-352 | IOT CPU problem |
| 07-300, 315, 330, 345 | Tray faults |
| 07-360-370 | HCF problems |
| 07-375, 380A, 380B | Duplex problems |
| 08-100-110 | Feed problems. Lead edge of copy paper is late getting to feed sensor of tray 1 |
| 08-115-162 | Feed problem. Lead edge of copy paper is late getting to registration sensor |
| 08-165 | Paper jam at registration sensor |
| 08-310-370 | Paper at a sensor when power is turned on |
| 08-330 | DADF nudger sensor |
| 08-380 | Registration side to side problem with home position |
| 08-390 | Nip |
| 09-300 | Copy cartridge finished (drum unit) |
| 09-310 | Add black toner Add color toner |
| 09-320 | Add color toner |
| 09-330 | Wrong copy cartridge (wrong drum unit) |
| 09-340 | Drum cartridge not installed properly |
| 09-350 | Waste toner full |
| 100 | A fault has occurred |
| 10-100 | Exit jam |
| 10-105 | Exit jam |
| 10-110 | Vertical sensor jam |
| 10-120, 122, 125 | Duplex jam |
| 10-150, 155 | Too much or not enough paper in duplex tray |
| 10-300 | Fuser thermistor |
| 10-302 | Low fuser temperature |
| 10-304 | Bad fuser temp |
| 10-308 | High fuser temperature or open thermistor |
| 10-310 | High fuser temperature |
| 10-312 | Fuser not up to temperature after energy save |
| 10-314 | Fuser problem |
| 10-320 | Fuser web finished |
| 10-330, 335, 340 | Exit switch, vertical sensor switch actuated when power is turned on |
| 11-100-116 | Sorter jam |
| 11-150-176 | Sorter auto stapler jam |
| 11-310, 314, 316 | Sorter interlock |
| 11-325A,B,C,D,E,F,G | Sorter index |
| 11-352, 354, 356 | Sorter auto stapler interlocks |
| 11-365A,B,C,D,E | Sorter auto stapler bin |
| 11-370,371,372A,373A,373B,374 | Sorter auto stapler staple failure, staple home problem or tamper home problem |
| 11-385A,385B,390A,B,C,D,E,396A | Sorter auto stapler staple failure, staple home problem or tamper home problem |
| 301 | Fuser web must be replaced |
| 302 | Copy cartridge (drum unit) must be replaced |
| 501 | Tray 1 must be rebuilt |
| 502 | Tray 2 must be rebuilt |
| 503 | Tray 3 must be rebuilt |
| 504 | Tray 4 must be rebuilt |
| 505 | HCF must be rebuilt |
| 506 | Bypass must be rebuilt |
| 507 | Duplex unit must be rebuilt |
| 508 | Replace black developer |
| 509 | Replace red developer |
| 510 | Replace green developer |
| 512 | Replace brown developer |
| 513 | Copy cartridge (drum unit) will need replacing soon |
| 514 | Fuser web will need replacing soon |
| 515 | DADF belt should be replaced |
| 516 | DADF feed rollers should be replaced |
| 517 | Replace exposure lamp |
| 518 | Replace suction filter |
| 519 | Replace ozone filter |
| 520 | Replace optics filter |
| 521 | Replace particle filter |
| 522 | Replace upper fuser roller |
| 523 | Replace fuser pawls |
| 524 | Replace pressure roller |
| 525 | Replace pressure roller pawls |
| 900-905 | Key operator calls |
Xerox 5355
| Код ошибки | Описание |
|---|---|
| 01-01 | Frequency monitoring and zero cross problem |
| 01-02 | Interlock |
| 01-03 | AC power problem |
| 01-04 | Finisher interlock |
| 01-05 | 24v problem |
| 03-01 | Optics to main board communication problem |
| 03-02 | Software reset problem |
| 03-03 | Could be punched holes in the lead edge of the original |
| 03-04 | Software problem |
| 03-06 | Low battery |
| 03-07 | NVM not initialized or is missing or defective |
| 03-17 | Communication problem between main board and finisher board |
| 03-18 | Initializes one NVM counter to agree to others |
| 03-19 | All three NVM counter to agree with others |
| 03-20 | Main board/interface board problems |
| 03-21 | Problem with RIC NVM |
| 03-22 | RIC modem problem |
| 03-23 | RIC real time clock failure. |
| 03-25 | RIC NVM problem or not initialized |
| 03-27 | NVM problem |
| 03-28 | Watchdog software problem |
| 03-29 | Microprocessor crystal not at correct frequency |
| 03-30 | No software response from finisher after 20 seconds have elapsed |
| 06-01 | Lens did not reach 1.1 position |
| 06-02 | 1/2 rate scanner problem |
| 06-03 | Scan home problem |
| 06-04 | Scan home problem |
| 06-05 | Scan home problem |
| 06-06 | Scan encoder |
| 06-07 | Scan encoder |
| 06-08 | Scan drive boost |
| 06-09 | Scan encoder |
| 06-11 | Scan encoder pulse phases |
| 06-12 | Insufficient scan damping |
| 07-01 | Duplex tray not home during duplexing |
| 07-02 | Tray 2 not home when selected |
| 07-13 | Tray 2 height sensor problem |
| 07-15 | Tray 2 empty |
| 07-16 | Tray 1 door open |
| 07-18 | Tray 1 stack sensor |
| 07-22 | Tray 1 empty |
| 07-26 | Tray 1 bypass switch actuated too long |
| 07-27 | Tray 1 bypass switch deactuated too early |
| 07-30 | Paper in duplex |
| 07-31 | Paper in duplex |
| 07-32 | Duplex tray empty, when paper should be there |
| 08-10 | Paper did not reach tray 2 input tray sensor |
| 08-11 | Paper did not reach duplex input sensor |
| 08-12 | Paper did not reach tray 1 |
| 08-14 | Paper did not leave tray 2 input sensor quickly enough |
| 08-18 | Trail edge did not reach tray 2 input sensor quickly enough |
| 08-19 | Trail edge did not reach tray 1 input sensor quickly enough |
| 08-20 | Paper in duplex |
| 08-21 | Paper in tray 2 input |
| 08-22 | Paper in tray 2 or duplex at wrong time |
| 08-23 | Paper at tray 1 input at wrong time |
| 08-24 | Paper in tray 1 at wrong time |
| 08-28 | Upper and lower nips problem |
| 09-08 | Low toner condition |
| 09-12 | Drum signals are out of range |
| 09-13 | Unstable drum patch readings |
| 09-15 | Patch is too dark |
| 09-16 | Patch is too light |
| 09-17 | Open toner container access cover |
| 09-18 | Low toner level |
| 09-21 | Low toner sensor disconnected |
| 09-22 | Low toner condition, even after machine has been theoretically, adding toner |
| 10-02 | Low fuser temperature |
| 10-03 | High fuser temperature |
| 10-06 | Paper did not reach out put switch |
| 10-07 | Paper stayed on output switch |
| 10-10 | Paper did not reach decurler sensor |
| 10-11 | Paper did not reach decurler sensor |
| 10-12 | Paper on decurler sensor |
| 10-13 | Paper did not reach duplex entry sensor in time |
| 10-14 | Paper did not reach duplex entry sensor in time |
| 10-15 | Paper on entry sensor at wrong time |
| 10-17 | Fuser temperature is too high and fuser relay has deactuated |
| 12-01 | Paper at finisher input sensor |
| 12-02 | Paper did not reach finisher |
| 12-03 | Paper reached finisher too soon |
| 12-05 | Paper at stapler |
| 12-06 | Paper at stapler |
| 12-07 | Paper did not reach stapler |
| 12-08 | Paper did not reach stapler |
| 12-10 | Complied motor not working properly |
| 12-15 | Eject motor problem and/or eject encoder |
| 12-20 | Stacker motor problem |
| 12-21 | Stacker interlock |
| 12-22 | Stacker bottom sensor |
| 12-23 | Stacker bottom sensor |
| 12-24 | Stacker bottom sensor senses full |
| 12-25 | Stack height sensor |
| 12-26 | Stack height sensor |
| 12-27 | Stack height sensor |
| 12-30 | Offset home sensor |
| 12-31 | Offset home sensor |
| 12-32 | OCT switch |
| 12-35 | Eject nip carriage |
| 12-36 | Eject cam interlock |
| 12-37 | Eject nip carriage open timing |
| 12-38 | Eject cam interlock |
| 12-40 | Tamper motor |
| 12-41 | Tamper home problem |
| 12-42 | Tamper home sensor |
| 12-43 | Staple load sensor |
| 12-44 | Tamper home sensor |
| 12-45 | Tamper home sensor |
| 12-50 | Low on staples |
| 12-51 | Stapler home sensor |
| 12-52 | Stapler home sensor |
| 12-53 | Eject cam interlock |
| 33-37 | Too few documents |
| 55-01 | rdh interlock switch open during use |
| 55-04 | Paper on bypass sensor |
| 55-05 | Paper at vacuum timing sensor |
| 55-06 | Paper on output sensor |
| 55-10 | No paper reached S31 |
| 55-20 | Paper did not leave S31 at correct time |
| 55-24 | Set counter arm problem |
| 55-25 | Documents in input tray not detected |
| 55-27 | Lead edge did not reach S35 at correct time |
| 55-2955-30 | Trail edge did not reach S35 at correct time |
| 55-31 | S32, ADF registration sensor did not see paper at correct time |
| 55-32 | S32 did not see trail edge at correct time |
| 55-33 | S36 One too many documents |
| 55-36 | One too many documents |
| 55-39 | Hole count problem on document feeder belt |
| 55-40 | Document belt travel problem |
| 55-41 | Document belt mistracking or skewing |
| 55-45 | Paper at inverter sensor |
| 55-47 | Inverter sensor did not see paper lead edge at correct time |
| 55-49 | More than 50 sheets in input tray |
| 55-50 | Right side interlock |
| 55-51 | Left side interlock |
| 55-55 | Document on glass |
| 93-93 | NVM has to be initialized after new software installed |
Xerox XC520, 540, 560, 580
| Код ошибки | Описание |
|---|---|
| H2 | Fuser thermistor |
| H3 | Fuser temperature too high. Must be reset in diagnostics |
| H4 | Fuser temperature too low. Must be reset in diagnostics |
| L3 | Scan problem |
| L4 | Min motor drive problem |
| L8 | Exposure lamp not lightning or not enough light reaching auto exposure sensor |
| P | Paper did not feed |
Xerox 5622
| Code | Description |
|---|---|
| A1-1 to A1-32 | All indicate a paper path problem, etc. in the ADF |
| A2 | ADF exit problems |
| A3 | Irregular size documents |
| A5 | ADF interlock |
| A6 | ADF single sheet document reset |
| A7 | Platen interlock |
| A8 | ADF exit interlock |
| C1 | Tray 1 jam |
| C2 | Tray 2 jam |
| C3 | Tray 3 jam |
| C6-1, C6-2 | Jams related to duplex |
| C6-3 | Registration sensor, re tray 1 |
| C7-1, C7-2 | HCF feed problems |
| C7-3 | Tray 1 feed problem |
| C8 | Paper stays in tray or duplex or HCF |
| C9 | Bypass feed problem |
| E1-10 to E1-25 | Internal jam |
| E1-6 | Paper on registration sensor |
| E2 | Reset signal happened. Might read E-2 something else |
| E3-30 to E4-14 | Exit jam |
| E3-6 | Exit jam |
| E4-10 to E4-14 | Inverter sensor not actuated |
| E4-15 | Inverter sensor |
| E4-40 to E4-45 | Duplex entry sensor |
| E4-6 | Inverter sensor |
| E5 | Front door interlock |
| E6-1 | Tray 1 interlock |
| E6-2 | 2 tray or duplex interlock |
| E6-3 | HCF interlock |
| E7-2, E7-3 | Duplex interlock |
| E8-6 to E8-15 | Duplex entry sensor |
| F1-1 | Sorter entry sensor |
| F1-6 | Sorter exit sensor |
| F3 | Paper size not available for sort/stack |
| F5 | Sorter interlock |
| J1 | Add toner |
| J3 | Replace copy cartridge |
| J7 | Replace copy cartridge |
| J8-1 | Wrong copy cartridge installed |
| J8-2 | Copy cartridge EEPROM |
| L6 | Auditron or other counter problem |
| L8 | Platen glass temperature is too high |
| L9 | Communication problem between interimage erase/edge lamps and main board |
| U1-1 | Main motor drive problem |
| U2-1 to U2-4 | Scan home sensor |
| U3-1 | Lens sensor |
| U4-1 | Open fuser thermistor |
| U4-2 | Fuser did not warm up properly |
| U4-3 | Fuser temperature too high |
| U4-4 | Fuser problem. Staying on too long |
| U4-6 | High fuser temperature |
| U5-1 | Sorter bin home switch not activated |
| U5-2 | Sorter bin home switch stayed actuated |
| U5-3, U5-4 | Sorter bin home switch |
| U6-1 | ROM problem |
| U6-2 | RAM problem |
| U6-3 | Low battery |
| U6-4 | Incorrect value in NVM. Reinitialize main board with code 20-96 |
| U8-1 to U8-6 | Problem with exposure lamp, lamp sensor, lamp board |
Thanks: 0
Likes: 0
Dislikes: 0
-
01-07-2014
#1
Service Manager
1,000+ Posts
- Rep Power
- 45
Xerox WC5225 with error 18-505
Customer called with error 18-505 on WC5225. The information i have so far seems to indicate some king of communication problem between machine and server/computer. Customer gets this when trying to scan to computer.
I asked customer whether they use passwords and he said no and that they have been scanning all alon g with no problem until a few days ago.
Please help as I am a little confused about this and need some direction. Frank/ActionPhotocopy
-
01-08-2014
#2
Re: Xerox WC5225 with error 18-505
18-505 SMB-DOS protocol error.
Unable to authenticate due to an incorrect user name or password. SMB
Check the user name and password with the system administrator. Note, the password cannot be verified. If you have forgotten the password, reset the password.
Note, Verify that the Date and Time on the WorkCentre EXACTLY match the date and time on the network server and destination PC. This is an especially common problem after daylight savings time change.
If none of the above resolve the issue, go to xerox.com to obtain the newest software level and install.
-
01-08-2014
#3
Service Manager
1,000+ Posts
- Rep Power
- 45
Re: Xerox WC5225 with error 18-505
Thanks Tom but as I mentioned they never used passwords for scanning and have never had a problem until a few days ago. Your last suggestion would be best option unless there was a time change by accident recently which caused a mismatch in the time. I am going there tomorrow and will try to obtain more info. Frank
-
01-09-2014
#4
Senior Tech
100+ Posts
- Rep Power
- 28
Re: Xerox WC5225 with error 18-505
Had the same symptoms on a 128. Turned out to be the modem for their broadband. The phone company changed it, somehow it had different settings. A few days later, no worky.
Glenn
-
01-09-2014
#5
Service Manager
1,000+ Posts
- Rep Power
- 45
Re: Xerox WC5225 with error 18-505
Thanks Glenn. That’s good to know and I’ll look into it and report results when call is complete. Frank
Bookmarks
Bookmarks
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
- BB code is On
- Smilies are On
- [IMG] code is On
- [VIDEO] code is On
- HTML code is Off
Forum Rules